Edwin25 Posted January 9, 2008 Report Share Posted January 9, 2008 (edited) After a lot of surfing, investgating and reading, i see that are 2 options left for my purchace of een sub TT What is the difference between a MBW rolex sub tt ( is is said that is the best quality you can get) and de new improved rolex sub tt from wm9 http://www.watchmaker9.tv/products/rolex_0...riner_16613.htm Hope that you can help me. Regards, Edwin Ps the first two picture is from MBW the tird from WM9 Edited January 9, 2008 by Edwin25 Link to comment Share on other sites More sharing options...
Edwin25 Posted January 11, 2008 Author Report Share Posted January 11, 2008 hmmm no reactions... Link to comment Share on other sites More sharing options...
gioarmani Posted January 11, 2008 Report Share Posted January 11, 2008 The band's SELs are worlds better on the WM9, even though it's SEVERELY overpriced. Dial print looks to be a bit better--MBWs are notorious for sub-standard dial print; especially for that price. On either one, you'll definitely have to replace & recess that insert & rework the CGs for any believeablity factor. If you wait 3-4 months, the other dealers will probably be able to get their hands on the WM9 piece, for a hell of a lot less. Link to comment Share on other sites More sharing options...
yellomen Posted January 12, 2008 Report Share Posted January 12, 2008 Gio... your siggy keep catching my attention!! Link to comment Share on other sites More sharing options...
Edwin25 Posted January 12, 2008 Author Report Share Posted January 12, 2008 The band's SELs are worlds better on the WM9, even though it's SEVERELY overpriced. Dial print looks to be a bit better--MBWs are notorious for sub-standard dial print; especially for that price. On either one, you'll definitely have to replace & recess that insert & rework the CGs for any believeablity factor. If you wait 3-4 months, the other dealers will probably be able to get their hands on the WM9 piece, for a hell of a lot less. Hi what the`the CGs ` that i have to repleace? Link to comment Share on other sites More sharing options...
mrandazzo Posted January 12, 2008 Report Share Posted January 12, 2008 Hi what the`the CGs ` that i have to repleace? - replace and recess that insert - rework the CGs Link to comment Share on other sites More sharing options...
gioarmani Posted January 12, 2008 Report Share Posted January 12, 2008 Hi what the`the CGs ` that i have to repleace? CG= "crown guard" Not replacing, just reshaping the insides, so they look more like the genuine (i.e. more likely to fool someone). The crown guards are the little outcrops of metal surrounding the winding crown, to protect it from damage: Link to comment Share on other sites More sharing options...
Raijor Posted January 12, 2008 Report Share Posted January 12, 2008 I have owned three two tone subs. A black dial from Josh, a blue dial from Andrew and another blue dial from Ruby. In the end I got rid of them and went to the all stainless and got myself a very good LV Sub. I replaced the bezel and modded the crown guards and have had it since Sept 05 and wear it for all my rough work and play. It has held up great. My point is that the two tone Subs are just not up to scratch. If you buy either the WM9 or the MBW you will have to make modifications beyond the crown and crown guards. You will have to polish the sides of all the bracelet links to match the case sides as well. Also, I question if the true blue dial color of a gen Rolex can be matched. Both of the blue dial subs I purchased turned out to be a differnt color than they were shown to be in the photos ... they turned out to be purple. If you go ahead for the two tone choose the black dial version it will offer a closer match to the gen. I would suggest one of the all stainless ahead of the two tone. JMO only Link to comment Share on other sites More sharing options...
perry563 Posted January 12, 2008 Report Share Posted January 12, 2008 I have been tempted many times to buy a new TT sub. They do look very nice. However they are not good enough to spend the kind of money asked. The end links are always a dead give a way and the plating, at least on my end links, wear quickly. Buy a top of the line SS Sub (fully modded BK Sub) and wait on a true ultimate version TT Sub.I have been tempted many times to buy a new TT sub. They do look very nice. However they are not good enough to spend the kind of money asked. The end links are always a dead give a way and the plating, at least on my end links, wear quickly. Buy a top of the line SS Sub (fully modded BK Sub) and wait on a true ultimate version TT Sub. Link to comment Share on other sites More sharing options...
Edwin25 Posted January 12, 2008 Author Report Share Posted January 12, 2008 I have been tempted many times to buy a new TT sub. They do look very nice. However they are not good enough to spend the kind of money asked. The end links are always a dead give a way and the plating, at least on my end links, wear quickly. Buy a top of the line SS Sub (fully modded BK Sub) and wait on a true ultimate version TT Sub.I have been tempted many times to buy a new TT sub. They do look very nice. However they are not good enough to spend the kind of money asked. The end links are always a dead give a way and the plating, at least on my end links, wear quickly. Buy a top of the line SS Sub (fully modded BK Sub) and wait on a true ultimate version TT Sub. Hi perry, Who sells the fully modded BK Subs? Link to comment Share on other sites More sharing options...
Edwin25 Posted January 12, 2008 Author Report Share Posted January 12, 2008 The band's SELs are worlds better on the WM9, even though it's SEVERELY overpriced. Dial print looks to be a bit better--MBWs are notorious for sub-standard dial print; especially for that price. On either one, you'll definitely have to replace & recess that insert & rework the CGs for any believeablity factor. If you wait 3-4 months, the other dealers will probably be able to get their hands on the WM9 piece, for a hell of a lot less. Are the MBW almost even expensive as the WM9? Link to comment Share on other sites More sharing options...
perry563 Posted January 12, 2008 Report Share Posted January 12, 2008 MBW will set you back around 375 bucks. It has a eta movement, great case, deep rehaut and overall best fit and finish. The BK mariners has a asian movement, shallow rehaut but great band, dial, CG, pearl, insert and crown. I think the BK mariner fully modded will set you back just as much. Overall I would go with the BK mariner.MBW will set you back around 375 bucks. It has a eta movement, great case, deep rehaut and overall best fit and finish. The BK mariners has a asian movement, shallow rehaut but great band, dial, CG, pearl, insert and crown. I think the BK mariner fully modded will set you back just as much. Overall I would go with the BK mariner. Link to comment Share on other sites More sharing options...
arty909 Posted January 13, 2008 Report Share Posted January 13, 2008 Whoops; too expensive for my rep pocket book and remember- it's still plated gold. I'll wait for Freddy, Bytor, or VB to give the thumbs up before I order from this dealer. Best to all, Arty Link to comment Share on other sites More sharing options...
Edwin25 Posted January 13, 2008 Author Report Share Posted January 13, 2008 The WM looks very nice, superior in this instance, but the MBW looks good as well, unfortunately this is one replica they will NEVER come close to on the original. When you have a gen in your hands, compare against the BEST rep you've ever seen and it will pale in comparison. The LV , modern sub and vintage pieces have come very close to accurate, but the TT does not IMO How do you mean `the TT does not IMO`? Edwin Link to comment Share on other sites More sharing options...
archibald Posted January 14, 2008 Report Share Posted January 14, 2008 I don't want to speak for Star, but I suspect he means lots of little things--the weight, Rolex's proprietary gold color, the glow of the blue dial (rolex's prettiest, IMO), general fit and finish, etc.--all working together to make a gen immediately recognizable even side by side from the best rep. Link to comment Share on other sites More sharing options...
Nightstroker Posted January 14, 2008 Report Share Posted January 14, 2008 This topic has been debated before....when the first watchmaker9 thread appeared concerning the 1:1 copy debate....the general consensus was this....you are better off buying an MBW because you will have to mod both watches anyway....why spend more money on the WM9 and mod it when you can spend less on the MBW and mod it with and end up with the same or better results....in other words....take the money you save from purchasing the MBW and spend it on the mods Link to comment Share on other sites More sharing options...
its_urabus Posted January 14, 2008 Report Share Posted January 14, 2008 gio, that sea dweller you posted, please tell me that is a gen, and not your ssd. If thats a ssd, I am sending mine back and sourcing one from where ever you got that one. do tell more gio... please? Link to comment Share on other sites More sharing options...
dvn Posted January 14, 2008 Report Share Posted January 14, 2008 If you wait 3-4 months, the other dealers will probably be able to get their hands on the WM9 piece, for a hell of a lot less. @Gio, Would you care elaborate on that a little? Link to comment Share on other sites More sharing options...
Edwin25 Posted January 16, 2008 Author Report Share Posted January 16, 2008 Let Link to comment Share on other sites More sharing options...
kevin300z Posted January 18, 2008 Report Share Posted January 18, 2008 (edited) I have a mbw polex blue tt sub and until you own one you don't know how close to the gen it looks. The biggest fault is the end links are not wrapped on the side with gold. But the new mbw fixed that. Here is a happy customer. http://www.rwg.cc/members/index.php?showto...amp;hl=blue+mbw I don't want to speak for Star, but I suspect he means lots of little things--the weight, Rolex's proprietary gold color, the glow of the blue dial (rolex's prettiest, IMO), general fit and finish, etc.--all working together to make a gen immediately recognizable even side by side from the best rep. Edited January 18, 2008 by kevin300z Link to comment Share on other sites More sharing options...
rosnik Posted January 18, 2008 Report Share Posted January 18, 2008 Take a look here. http://www.rwg.cc/members/index.php?showto...7591&hl=wm9 and just for info my SS WM9 , they are structurally the same WM9 SS and WM9 TT: http://www.rwg.cc/members/index.php?showto...1103&hl=wm9 The like "real" feeling of 16610 from WM9 have paragon only with the real 16610. I got 16610 MBW too, but out of the box it's really poor, so it's for sure cheaper than WM9. Link to comment Share on other sites More sharing options...
Edwin25 Posted January 18, 2008 Author Report Share Posted January 18, 2008 tnx. But the MbW is 14K and a gen is 18K? Link to comment Share on other sites More sharing options...
w.genzo Posted January 18, 2008 Report Share Posted January 18, 2008 WM9 is has the gen bezel, rehaut ,tube and crown construction. The chance to replace almost all the parts with gens is amazing. I own both MBW and WM9 sub, and in my opinion nothing is comparable to WM9 case.. But it has big flaws "out of the box" too. Neither WM9 nor MBW worth their price if you don't mind to mod it. Link to comment Share on other sites More sharing options...
Edwin25 Posted January 18, 2008 Author Report Share Posted January 18, 2008 Hi you say the wm9 has big flaws. Wich r these flaws. Do you recomond the wm9 ( the z-model 2007)or the MBW. ( i don Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now