Tribal Posted May 23, 2008 Report Share Posted May 23, 2008 Hello Guys, I have a SSD with "thicker Bezel" here.... So I measured the thickness of both Bezels (Old and new) and they have the same thickness. It's only the shape that makes it thicker visually.. Link to comment Share on other sites More sharing options...
Dizzy Posted May 23, 2008 Report Share Posted May 23, 2008 good thing i havent ordered the case upgrade from BK yet.. i better hold off until this is sorted out Link to comment Share on other sites More sharing options...
manuel Posted May 23, 2008 Report Share Posted May 23, 2008 good thing i havent ordered the case upgrade from BK yet.. i better hold off until this is sorted out What case upgrade? you mean a different and upgrade case? do you have any pic? Link to comment Share on other sites More sharing options...
jockl1978 Posted May 23, 2008 Report Share Posted May 23, 2008 When the bezel has the same hight, might it be that it sits just higher in the case - so the portion below the bezel is more present? Because from the comparison shot it definitely looks different! Link to comment Share on other sites More sharing options...
Dizzy Posted May 23, 2008 Report Share Posted May 23, 2008 What case upgrade? you mean a different and upgrade case? do you have any pic? yeah BK offers the new updated case, bezel with crystal and crown tube for $80. New SSD bracelet is apparently an additional $40 So all yoiu had to do was swap the movement, bezel insert and crown and you had a new updated SSD with thick bezel and better bracelet... but now it looks like there may some discrepencies here... dizz Link to comment Share on other sites More sharing options...
mjmurphy926 Posted May 23, 2008 Report Share Posted May 23, 2008 I think the difference is the cut of the bevel on the underside of the bezel. The most current offering is not cut as deep (or as far, in other words) as some of the earlier bezels were cut. The most current bezel definately closer resemble the gen. I'm not sure when the factory started cutting the deeper bezel bevel (bezel bevel, say that 5 times fast ), but I have one of an first available SSDs and it has the same bezel as is currently available. I never bought into the "thicker bezel" notion. Not thicker, just less material machined away. Link to comment Share on other sites More sharing options...
Tribal Posted May 23, 2008 Author Report Share Posted May 23, 2008 I think the difference is the cut of the bevel on the underside of the bezel. The most current offering is not cut as deep (or as far, in other words) as some of the earlier bezels were cut. The most current bezel definately closer resemble the gen. I'm not sure when the factory started cutting the deeper bezel bevel (bezel bevel, say that 5 times fast ), but I have one of an first available SSDs and it has the same bezel as is currently available. I never bought into the "thicker bezel" notion. Not thicker, just less material machined away. Yepp you are right about that. Same height but different shape. But visually makes it a huge different. Link to comment Share on other sites More sharing options...
bklm1234 Posted May 23, 2008 Report Share Posted May 23, 2008 Interesting finding, Tribal. SSD v2 bezel seems thicker. Top is v2, bottom is v1 Focus of camera on the v2 case. Note the thicker bottom and side of the bezel. Focus of camera between the 2 cases Focus of camera on the v1 case The best part is the crystal doesn't look as comically tall. SSD v1 with insert already recessed. Crystal looks too tall to me: SSD v2 with insert also recessed, actually more recessed than the previous one and yet the crystal looks shorter and better. The factory could have thinned out the crystal, I don't know: It doesn't matter if v2 bezel is thicker or not. Overall v2 is much better looking, thicker "looking" bezel, shorter crystal, the winner. -bk Link to comment Share on other sites More sharing options...
Tribal Posted May 23, 2008 Author Report Share Posted May 23, 2008 You are right Bklm, visually looks damn better. Link to comment Share on other sites More sharing options...
polexpete Posted May 24, 2008 Report Share Posted May 24, 2008 I recieved one from Andrew with the new bezel and a gen insert went in with no filing, sanding or glue needed. i will post some pics soon. Cheers P. Link to comment Share on other sites More sharing options...
JohnG Posted May 24, 2008 Report Share Posted May 24, 2008 (edited) Something that I have noticed that contributes to the apparent thickness of the new bezel is that the teeth terminate about half way down the vertical flat of the side of the bezel. On the old bezel the groove of the tooth terminates about two thirds of the the way down the vertical and is much closer to where the bottom bevel begins... I believe that the tooth cut on the old bezel is more vertical than on the new - it looks that way in the photos. That would explain how it terminates lower with the same bezel height. . Edited May 24, 2008 by JohnG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now