leitztozeiss Posted July 5, 2006 Report Share Posted July 5, 2006 (edited) Ok. I think I'm going to attempt to fix the subdial hand on this thing. I can remove the crown guard and back. And, with the right size screw driver, I'm fairly confident I can remove the stem without screwing up the movement. Question is, how are the screw-down pushers coupled to movement? Are they easily removed? Once the stem and pushers are removed, it should be fairly easy to remove the movement/dial assembly from the case, right? I already have a hand remover. I'll also utilize a clear plastic sheet with a slit to protect the dial while removing the hand. Any tips before attempting this are greatly appreciated. Edited July 6, 2006 by leitztozeiss Link to comment Share on other sites More sharing options...
Bignasty Posted July 5, 2006 Report Share Posted July 5, 2006 (edited) Ok. I think I'm going to attempt to fix the subdial hand on this thing. I can remove the crown guard and back. And, with the right size screw driver, I'm fairly confident I can remove the stem without screwing up the movement. Question is, how are the screw-down pushers coupled to movement? Are they easily removed? Once the stem and pushers are removed, it should be fairly easy to remove the movement/dial assembly from the case, right? I already have a hand remover. I'll also utilize a clear plastic sheet with a slit to protect the dial while removing the hand. Any tips before attempting this are greatly appreciated. More than likely there will be a metal ring around the movement. This ring will serve two purposes. It will hold the movement at center in the case. It also houses "pusher extenders" for the chrono functions. In other words the movement is much smaller than the case and the actual pushers you see on the case wouldn't reach the movement. So the ring has these free floating pushers that serve to extend the actual case pushers. You shouldn't have to remove the actual pushers from the watch! Sounds complicated but should be easy. Once you get in there you will see how it works. Just be cautious and take some time to analyize where everything sits before you start removing parts! My Chrono Avenger is built this way so I'm guessing the 187 is no different. You'll also likely have to remove two small flat head screws that will hold thhe movement into this ring. Just make sure you are cautious of these "pusher extenders" so that you don't lose them. Hope I've helped you out! Cheers, Jon Edited July 5, 2006 by Bignasty Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 Is this the stem release button, as shown in the pic below? Thanks. Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 BigNasty, once the stem and movement holder screws are removed, will the movement come out without the spacer ring, or do they fall out together? I'm guessing that the spacer ring stays in place when I flip the watch over?? Link to comment Share on other sites More sharing options...
Bignasty Posted July 6, 2006 Report Share Posted July 6, 2006 BigNasty, once the stem and movement holder screws are removed, will the movement come out without the spacer ring, or do they fall out together? I'm guessing that the spacer ring stays in place when I flip the watch over?? They should both come out. This is where you must be careful not to loose the "floating/extending pushers". Take a peice of paper and place it over the movement. Then carefully flip the watch over. The movement and ring will come out in your hand. Do all of these preferably in a well light area over a table and on a floor with no carpet. If you have an area like that! Good luck! Jon Is this the stem release button, as shown in the pic below? Thanks. Yes! Don't push too hard! Jon Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 Sorry about the many questions. But, as I push *lightly* do I pull also on the crown? (Of course, all of this after moving the crown to the outer time setting position) Link to comment Share on other sites More sharing options...
Finepics Posted July 6, 2006 Report Share Posted July 6, 2006 On the honpo 187 the pushers are 2 piece but not with a floating connector in the movt spacer. The spacer and movt is removed easily just by letting it drop out from the opposite side to the psuhers complete with movt ring. Replacement is a reverse - tip the movt into the case - it will be obvious. No need to remove the pushers. Again in the honpo case the internal part of the pusher has a screwdriver slot whch allows the pusher to seperate and be removed from the case. Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 (edited) Ok, I may give this a go after the kids are down for the night! It'll really depend whether my smallest screw driver is small enough to remove the movement holder screws. Edited July 6, 2006 by leitztozeiss Link to comment Share on other sites More sharing options...
Bignasty Posted July 6, 2006 Report Share Posted July 6, 2006 Sorry about the many questions. But, as I push *lightly* do I pull also on the crown? (Of course, all of this after moving the crown to the outer time setting position) Yes pull and push at the same time being very careful not to push too hard. Also be very careful not to slip off of the release button while pulling. This is one of those situations where a case holder/vise is very helpful! Good luck again! Jon Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 Holy crap . . . I did it!!! Pics shortly . . . Link to comment Share on other sites More sharing options...
Bignasty Posted July 6, 2006 Report Share Posted July 6, 2006 Holy crap . . . I did it!!! Pics shortly . . . Very glad to hear! Doesn't it feel good when its all done? Its so stressful while the watch is open but when I get that caseback on and double-check for dust/functionality it feels so good! Talk about a great beer break! Cheers, Jon Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 (edited) First removed case back using the balled duck tape technique. Disassembled crown guard B from case by removing screws C. Removed crown A per Jon's instructions above. Removed movement holding screws D. Held a clear plastic sheet against movement, and flipped watch upside down so that movement falls out of case and onto plastic sheet in hand . . . Cut slit in a small square of clear plastic sheet and slid the sheet between dial and underside of subdial hand. Using hand remover tool (making sure tool feet rest against plastic sheet and NOT the dial), removed the offending 30-minute subdial hand . . . Duck taped the movement/dial assembly to the table in absence of movement holder (perhaps should've done that before the hand removal - oh well, live and learn) . . . Used Edge technique of using clear gift wrap tape to hold hand while positioning . . . Once in position, press the subdial hand home using the tube end of a pen ink refill . . . Notice assembly of pushers and case . . . movement has to be guided sideways and down into the case so that pusher ends enter apertures in side of movement . . . Screw movement down, insert crown (this took me several times, and a couple of heart stopping moments before realizing that I should've first centered the movement so that the aperture in the movement for receiving the stem is properly centered with respect to the stem hole in the side of the case) . . . voila . . . a couple of days to think about it, and about 45 minutes to actually do it. Edited July 6, 2006 by leitztozeiss Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 Thank you Jon, and thank you Finepics for the tips!! Link to comment Share on other sites More sharing options...
mikellem Posted July 6, 2006 Report Share Posted July 6, 2006 Hey Doc.. Nice Surgery! Thanks for the great education and excellent pics.. Link to comment Share on other sites More sharing options...
dadog13 Posted July 6, 2006 Report Share Posted July 6, 2006 Holy crap . . . I did it!!! Pics shortly . . . Doc...glad to see that everything went well...i know that I wouldn't be capable of doing it...so if i get mine 187 with the misaligned subdial hand, I'll send it to you for repair! cheers! Link to comment Share on other sites More sharing options...
Quarks Posted July 6, 2006 Report Share Posted July 6, 2006 Well done!!! Link to comment Share on other sites More sharing options...
Pugwash Posted July 6, 2006 Report Share Posted July 6, 2006 Bloody hell, nice one! Link to comment Share on other sites More sharing options...
Watchmeister Posted July 6, 2006 Report Share Posted July 6, 2006 Very nice post. I would kill for that metal spacer. Watchonp comes with a plastic spacer. It works but not very elegant. Link to comment Share on other sites More sharing options...
Watchwatcher Posted July 6, 2006 Report Share Posted July 6, 2006 nice job and even better showing us the pics. one question. when you use the clear tape to reposition the sub hand, it appears the adhesive is only attached to the sub hand at the center circle... is that right, and is there any risk when you do this of getting the tape against the lume and tearing some off? thx. Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 (edited) . . . is there any risk when you do this of getting the tape against the lume and tearing some off? thx. Ooh. I didn't think about that while doing this. Yes, I made sure the adhesive only touched the end of the hand with the hole, but did so to facilitate separation of the hand from the tape once pressed into position. But, your reason sounds like a better reason for doing this!! Edited July 6, 2006 by leitztozeiss Link to comment Share on other sites More sharing options...
V Posted July 6, 2006 Report Share Posted July 6, 2006 CONGRATSSSSSS .... !!!!!! Link to comment Share on other sites More sharing options...
ubiquitous Posted July 6, 2006 Report Share Posted July 6, 2006 Great work Dr. Zeiss! Link to comment Share on other sites More sharing options...
Chronus Posted July 6, 2006 Report Share Posted July 6, 2006 Looks like there is a whole there for the date pusher. Easy to put a 7753 into this case? Link to comment Share on other sites More sharing options...
Richard Tracy Posted July 6, 2006 Report Share Posted July 6, 2006 Great Job ! Could you point out the hand removal tool ? I think I need to get one of those... Thanks ! Link to comment Share on other sites More sharing options...
leitztozeiss Posted July 6, 2006 Author Report Share Posted July 6, 2006 (edited) Thanks. The hand remover tool is shown below with the 'wood' handle just below the tweezers. Edited July 6, 2006 by leitztozeiss Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now