T-crowns - please read this info if you have ordered one

[t]

Hi friends

i am out of stems for the T-crowns... so if you ordered a T-crown with a extra ETA Unitas 6497 stem... you have to wait 2 weeks

I got many emails with questions but can

[100]

Yes, T48 crown. Will order several for sure!!!

[mjmurphy926]

Awesome T!!! Can't wait for the T-48!! The T-60s are great crowns, now we get the correct number of teeth!!

40 Euro sounds very reasonable to me.

[takashi]

I am in for some more T60 and T48. Yes, it fits DSN case Ti.

As for the stem, actually ETA/Asian 7750 can be fitted with 1.2mm stem too (it comes with 2 sizes from ETA). But ALL Asian 7750 based reps that I have seen all comes with 0.9mm stem. Yes, you need new stem for most of the case (I have fitted on a few PAM auto and manual wind, all need new stem). Unless you want to glue to stem thread to the crown to adjust the length, then you need new stem.

[PAMman]

T, you have just answered a question I was going to PM you - I want a couple of 60t now and 4X 40t when available. Will send email to order 60t now.

[TomRiddle]

i betcha t made this post cuz of a recent order i placed

lol it was for 1x60 and... yep, the extra stem

hehe 2 weeks is fine, i don't even have little hero's dial yet...

-Ezzy/tomriddle

[fishgodeep]

Good news T - count me in for a good few T-48 and thanks for doing these !!

Best

FGD

[ubiquitous]

Count me in for a PVD 48! And no complaints on the pricing here- All very fair and reasonable to me!

[athan]

Great news T!

Please count me in for at least 1 x T48 steel crown.

I'll send you immediate PM upon your notice.

Many thanks for the effort,

Athan

[peepshow]

My crown and stem just got delivered yesterday, t. Thanks!

Anyone else notice that the finish on t's crowns is brighter and more gen like than the "Palp" crowns that PAM was providing?

I'll be ordering a couple of the t48 crowns as well, when they're ready. Thanks, again!

[ihalatch]

Hi Guys,

I'm going to buy a few t-crowns but I'm not sure about the size of the stem needed to fit the DSN swiss movement rep. What's the size 0.9 or 1.2mm? Please, help.

Cheers

[t]

Hi Guys,

I'm going to buy a few t-crowns but I'm not sure about the size of the stem needed to fit the DSN swiss movement rep. What's the size 0.9 or 1.2mm? Please, help.

Cheers

all hand wind 6497 (if asian or swiss) use 1.2mm stem size (and all swiss valjoux 7750)

all auto movements (ETA 2836,2892,2893) and asia 7750 movements use 0.9mm stem size

[LegendofSpeed]

can't wait for the T-48's... the T-60's look good too though!

[mastergod]

can't wait for the T-48's... the T-60's look good too though!

Noob question:

Ok figured out the stem size issue.

And 48 & 60 - this refers to number of teeth. Am I correct when assuming some Pams have 48 teeth and some have 60?

If so, is there a list of which model has such-n-such number of teeth? First of all looking for a crown for 201A.

Thanks, MG

EDIT: 48/60 ISSUE UNDERSTOOD. IF THERE ARE OTHER CONFUSED NOOBS LIKE ME OUT THERE:

48 TEETH IS PER GEN, 60 TEETH IS INCORRECT BUT LOOKS GOOD.

[t]

UPDATE

stems are back on stock

T-48 crowns will be available at 1. Dec 2008

[z3k0]

all hand wind 6497 (if asian or swiss) use 1.2mm stem size (and all swiss valjoux 7750)

all auto movements (ETA 2836,2892,2893) and asia 7750 movements use 0.9mm stem size

I wouldn't quite agree with this - all 7750 can use 1.2 and .9 stems, it just depends what kind of crown you have. Part of the stem that goes into movement is identical on both kinds. The thing is that most of reps use 0.9 stems, I guess it's 0.00000002 cents cheaper, and lot of gens use 1.2 stems, since they give much more robust feel to the crown, especially when you have large case i.e. long stem.

regards