Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

How to remove a broken tap


Guest avitt

Recommended Posts

Guest avitt

Let's say that your "friend" sheepishly confesses to you that he has broken a tap off in his Rolex case, while cleaning the threads for a new crown tube. He shows you a case that looks something like this:

img4701.jpg

img4702.jpg

You confirm that there is indeed a High Speed Steel bit hopelessly sheared off in the hole. He asks you if anything can be done...

Of course, the first thing that you do is lecture your friend about the proper use of hand tools, and explain to him that you yourself would never be in this situation. After that, you let him know that yes, there is an easy, cheap fix for this problem. Here are the steps:

1. Obtain some Alum from the spice section of your local grocery store.

img4719.jpg

2. Bring about 1" of water to a boil in a glass, ceramic, or aluminum pan. Pyrex is perfect.

img4711.jpg

3. Add in about 1.5 ounces of Alum.

img4722.jpg

4. Bring the mixture down to a simmer (lowest heat). Drop in the case. Push the pot to the side of the burner, and the case to the side of the pot. (This to assure that the case won't be accidentally overheated and discolored.)

After a few seconds, a rapid stream of bubbles will begin to emerge from the tube hole.

img4748.jpg

5. Cover the pan to limit evaporation. Simmer for about 3 hours.

6. Remove the case, rinse, and allow to cool.

7. Use a paperclip to press out the dissolved remains of the tap.

img4821.jpg

img4823.jpg

In the end, your "friend" will be delighted that the tap is out, and the case is ready for him to try again (this time, pre-drilling with a 2.65mm bit, of course.)

img4826.jpg

Link to comment
Share on other sites

Guest avitt

While I have personally removed a couple of broken stems by soaking in vinegar for about 3-4 days, my "friend" told me that he soaked the broken tap for about a week, with very little effect.

I told him that he could also dissolve the tap in a room temperature alum solution, but he would have to wait for many days, instead of a few hours.

Link to comment
Share on other sites

Very good info.

BTW, can anybody help me to find this product in Spain or Europe? I think we do not use this product here. It is the first time I see this product in my life.

Any link to a shop or Ebay? I cannot find it in ebay.

The name in Spanish of this product?

Thanks,

Francisco

Link to comment
Share on other sites

Guest avitt
Very good info.

BTW, can anybody help me to find this product in Spain or Europe? I think we do not use this product here. It is the first time I see this product in my life.

Any link to a shop or Ebay? I cannot find it in ebay.

The name in Spanisk of this product?

Thanks,

Francisco

As a clue, Alum is used here to make pickles.

Link to comment
Share on other sites

Pretty cool avitt. Obviously this stuff doesn't react with stainless steel.

Francisco, my Spanish dictionary refers to the Spanish word as 'alumbre'

Thanks.

However, alumbre is also a deodorant. :huh: and many times they explecitily say that does not have aluminium <_<

Francisco.

Link to comment
Share on other sites

As a clue, Alum is used here to make pickles.

Here's a dumb question for you. Why does Alum dissolve the bit, but do nothing to the case? Does the stainless steel chromium content make it more resistant to corrosion or whatever it is that the alum is doing to the high speed steel? Is the alum acting as a corrosion agent or catalyst or whatever in the system???

Link to comment
Share on other sites

Guest avitt
Here's a dumb question for you. Why does Alum dissolve the bit, but do nothing to the case? Does the stainless steel chromium content make it more resistant to corrosion or whatever it is that the alum is doing to the high speed steel? Is the alum acting as a corrosion agent or catalyst or whatever in the system???

All I can say is that the Alum causes rapid oxidation of the carbon steel. (It won't effect ss or aluminum.)

Pretty general, I know...But I can get you more information, if you want. Both of my parents are chemists (retired professors). My mom loves to give me the details of these types of reactions, while pointing out how little I learned in college :rolleyes:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up