bklm1234 Posted May 1, 2009 Report Share Posted May 1, 2009 I put in a gen crown (part 931) on this noob exp2. The tube is an aftermarket tube that screws in the noob case. Gen/generic tube requires re-tapping which I hate doing so I looked and looked for one that doesn't need re-tapping. It took me a while to finally find the tube I want. It's a bit long so I had to trim it short. I also had to countersink the hole. The result is excellent. BTW, I also trimmed the CGs. Enjoy. -bk Link to comment Share on other sites More sharing options...
Nanuq Posted May 1, 2009 Report Share Posted May 1, 2009 Ahhhhhhhhh, nice. There is nothing like the smooth feel of a gen crown. Link to comment Share on other sites More sharing options...
its_urabus Posted May 1, 2009 Report Share Posted May 1, 2009 looks like mine, which watchdog did. my tube was aftermarket as well, but I am pretty sure it needed re tapping. Yours looks awesome, maybe I will give you a call for my exp I Link to comment Share on other sites More sharing options...
dluddy Posted May 1, 2009 Report Share Posted May 1, 2009 Looks great BK Link to comment Share on other sites More sharing options...
ammandel Posted May 1, 2009 Report Share Posted May 1, 2009 What strikes me in these pictures is how polished your CG looks, I commented recently on Lani's BK WM9 Sub that also had a super polished CG which is (I've found) a real gen feature that most reps skip out on... Any extra effort go into this? Link to comment Share on other sites More sharing options...
bklm1234 Posted May 1, 2009 Author Report Share Posted May 1, 2009 The CGs are stock except for the inside trim. I didn't polish them and of course I didn't scratch them during the trim -bk Link to comment Share on other sites More sharing options...
jmarin.72 Posted May 1, 2009 Report Share Posted May 1, 2009 I can confirm that the cg's are stock,i got the EXP II from BK a couple of weeks ago and i sent it over to Domenico for cg's re-shape and gen crown/tube installment.The watch looks really great.Just take a look of how it looks before the gen crown install And here is a double shot side by site with my gen Link to comment Share on other sites More sharing options...
concepta Posted April 19, 2010 Report Share Posted April 19, 2010 Whats the correct gen crown/tube? 24-600? Link to comment Share on other sites More sharing options...
By-Tor Posted April 19, 2010 Report Share Posted April 19, 2010 Great rep indeed, but gen crown is a must! Link to comment Share on other sites More sharing options...
concepta Posted April 19, 2010 Report Share Posted April 19, 2010 Great rep indeed, but gen crown is a must! ..and what should i be looking for? 24-600? 24-700? 24-500? Link to comment Share on other sites More sharing options...
By-Tor Posted April 19, 2010 Report Share Posted April 19, 2010 Honestly, I have no idea. I only remember it's a 6mm twinlock. Link to comment Share on other sites More sharing options...
ubiquitous Posted April 19, 2010 Report Share Posted April 19, 2010 I seem to recall 24-6020 for the tube. The conundrum here is that the 24-6030(?) I believe has the same case threading/tap size as a 5.3mm tube; the older 602 style should have the larger size tap, which I believe should be the same for the rep. Been a while since I've had to deal with the 6mm crowns, though... Link to comment Share on other sites More sharing options...
By-Tor Posted April 19, 2010 Report Share Posted April 19, 2010 It's interesting how there are different types of twinlock for ExpII/GMTII. Other (that was used in the older models) is a bit rounder and has more apparent threads/cuts (similar as BK's crown) and the other one that newer GMTs and ExpIIs use is flatter from both sides. Link to comment Share on other sites More sharing options...
stilty Posted April 19, 2010 Report Share Posted April 19, 2010 in the gen world, tube would be 24-5300 crown would be 24-630-0 Link to comment Share on other sites More sharing options...
concepta Posted April 19, 2010 Report Share Posted April 19, 2010 in the gen world, tube would be 24-5300 crown would be 24-630-0 And that would be a clean installment? Link to comment Share on other sites More sharing options...
mjmj Posted April 20, 2010 Report Share Posted April 20, 2010 the watch looks great! Link to comment Share on other sites More sharing options...
Star69 Posted April 20, 2010 Report Share Posted April 20, 2010 a little warning - the fat rep-crown make sense - if you put a gen crown you will soon realize that it sits way too low - i didnt get used to it cheers, Frank Link to comment Share on other sites More sharing options...
ubiquitous Posted April 20, 2010 Report Share Posted April 20, 2010 And that would be a clean installment? N- If you get a 602-0 6mm crown, you may find that it will thread onto the rep tube as-is. At least, that's what I've experienced... Link to comment Share on other sites More sharing options...
By-Tor Posted April 20, 2010 Report Share Posted April 20, 2010 a little warning - the fat rep-crown make sense - if you put a gen crown you will soon realize that it sits way too low - i didnt get used to it cheers, Frank Too low? You mean the vertical crown position? Nope, not on this model. The wrong hand stack version is 98% exact, the CHS version is 100% spot on. Link to comment Share on other sites More sharing options...
Star69 Posted April 20, 2010 Report Share Posted April 20, 2010 Too low? You mean the vertical crown position? Nope, not on this model. The wrong hand stack version is 98% exact, the CHS version is 100% spot on. yes - the vertical postition - BUT on the Noob-GMT-Master looks like its better on the Explorer Link to comment Share on other sites More sharing options...
By-Tor Posted April 20, 2010 Report Share Posted April 20, 2010 yes - the vertical postition - BUT on the Noob-GMT-Master looks like its better on the Explorer You're right. It's much worse on the GMT rep. ExpII is great in this regard. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now