hologramet:
"...that isn’t 100% correct.. They have KIF shocks, and are Top grade regarding the rest; Glucydur spring etc..Don’t remember if they are/used to be chrono certified. Also.. what’s the point of it being engine turned if the bridge isn’t engraved."
You missed two key words.
"The main difference looking at a regular ETA 2824-2 and a tudor 2824-2 is the tudor movement is engine turned for decoration."
My guess is many regular watch guys can not tell a KIF Parechoc from an Incabloc.
Balance wheels are sometimes made out of Glucydur, not hairsprings.
Vintage ETA 2824-2 tooters did not use certified movements afaik. If they did they would brag about it.
ETA grades:
Standard – adjusted in two positions; accuracy of +/-12 sec/day up to +/- 30 sec/day.
Elabore – adjusted in three positions; accuracy of +/-7 sec/day up to +/- 20 sec/day.
Top – adjusted in five positions; accuracy of +/-4 sec/day up to +/- 15 sec/day.
Chronometer – COSC specs.
Standard and Elabore Grades:
Nickel plated balance wheel; Nivarox hairspring; polyrubies used for pallet jewels.
Polyrubies?
Top and Chronometer Grades:
Glucydur balance wheel; Anachron hairspring; red rubies used for pallet jewels.
One way to distinguish between Standard/Elabore and Top/COSC grades of ETA movements is to look at the anti-shock device on the balance wheel:
Standard Novodiac / ETACHOC
Elabore Novodiac / ETACHOC
Top Incabloc
Chronometer Incabloc
Sogeha:
"...I see little point in such attention to visual details of a movement as signed rotor and engine turning of the same pattern on a rep of a watch with a closed back."
Me neither, I was just trying to put something up because the forum is so slow. Truth is I never cared much for tooters. Especially newer tooters.
Newer tooters = Neutered tooters imho. Ha!