Leaderboard

Sent from my SM-F711B using Tapatalk

AP ROO Diver out in the sun

Genuine 90% condition 15200 case, dial, hands, crown, crystal... Powered by NOS Mido Commander/ETA 12892.

"In my opinion for 1500 builds, fitting a 2836-2 or 2846 (lowbeat equivalent of the 2836-2) is easier than to fit a 2824-2." More Trivia along that line... A rolex 15000 case made for a cal 3035 is very close to the same as a 1500 case so if you run across a 15000 case it will also work with an ETA 2836. Dial diameters are the same and they both have the same 5.3mm crowns and 19mm bracelet hoods. The 1500 takes a 25-117 crystal and the 15000 takes a 25-145. The 15200 case with cal 3135 is different besides having a sapphire crystal. The cal 3135 is thinner than a 3035 or 1575 so the stem may not/will not line up in the case tube when using an ETA 2836. A case made for a cal 3135 will usually take an ETA 2824. An ETA 2836 will usually work in a case made for a cal 1575 date or rlx 3035. No guarantees. I have a rolex 15200 case with a (Mido) ETA 12892, it all fits fine and the 12892 has been out of production for years so they are hard to find but it is the same basic movement as an ETA 2892/2892-A2. The watch was put together by another RWG member who has been absent for years...'Stilty'. He also made the famous 'Stilty Spacer' a CNC made spacer to adapt an ETA 28xx to a rolex case. He sent me the unsold spacers when he left the forum and I put them where I could find them...but I can't find them. They are probably hiding out with my gold Bulova 'Beau Brummel' that I can't find. bidfun-db Archive: Watch Movements: Mido 12892 (ETA 2892) (ranfft.de) movement holders / spacers for franken projects - Watch Repair & Upgrade - RWG Movement spacers... - The Rolex Area - RWG The pic is long gone. 8-2-22...The 15200, about 18 posts down... Rolex Wristies thread - Page 143 - The Rolex Area - RWG

In my opinion for 1500 builds, fitting a 2836-2 or 2846 (lowbeat equivalent of the 2836-2) is easier than to fit a 2824-2. This is because the 2836-2/2846 has a closer crown/stem/tube height to a gen 1500 / 15000 case, so it is less finicky to fit. On top of that, I recommend using the Helenarou movement ring (https://www.helenarou.com/eta-adapter-for-genuine-or-clone-rolex-5512-5515512551355141680.html) with the 1500 case. You might need to sand the inner and outer diameter of the movement ring to ensure a nicer/ snug fit. Furthermore, here are the advantages of 2836-2/2846 movement: - 2836-2/ 2846 movements have quick date flips at midnight like gen, unlike the 2824-2 where the date flips are gradual. - 2836/ 2846 comes with taller H3 (or sometimes H4) cannon pinion and seconds wheel, which makes the hands clearing the dial easier For your motivation, here is my superfranken 1500: - Gen everything (including the 7835 bracelet and hands) - Modified ETA 2846 lowbeat movement (to fit gen hands and to remove the quick-set date function, like gen 1570 movement) - Cartel open 6/9 DWO - Modified Helenarou movement ring

The biggest challenge is placing the date wheel overlay on the movement- check rafflesdials.com, they have the flat top 3, open 6/9 overlay whichis pretty close to the gen one. Overlays - Page 1 - Raffles Dials I think this #2 movement ring will work to keep the 2824 in place. Movement Ring for ETA 2824 / 2836 or others that fit Size#2 | eBay A few screws and movement tabs can also be picked up on ebay. Hands can be found at clark's watch Supply- nostalgia-2000 on the bay Hands ETA 2824 Shiny Silver in color For Rolex Tudor Date or Dress with luminous | eBay Good luck