Jump to content
When you buy through links on our site, we may earn an affiliate commission.

preacher62

VIP Member
  • Posts

    850
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by preacher62

  1. Where would one purchase a gen sub, black & silver bezel insert? I have tried the Watchbandman, Watch Material and Jewelry Outlet inserts and, IMHO, they are all wrong. The 2 is wrong. It just doesn't look right. Need a gen for my MBK. If someone has one for sale, just say.

    Thanks!

    Mike

  2. I was just wondering who, here, takes their case back off and shows the movement to folks. The movement is the biggest dead giveaway there is to your rep. Engraving 3135 on the bridge does not a 3135 make. If you show the movement to them they will know for sure then...won't just think anymore.

  3. I agree with Panerai153. I don't even like the rehaut engraving on the gens. Just looks ostentatious, or something...too much.

    BTW...all the mods that I did to the Noob...just about anyone can do. The only two that it really needs is the insert and pearl. The others are just WIS stuff.

    I bought mine from Eurotimez and recommend them as a trusted dealer. Neo can take care of you.

    I will say that when I moved to the MBK case (also from Eurotimez), it made me realize what a great watch the Noobmariner is. Well made and well executed. You have made a great decision. (Made me a little sad to put the Noob case in the drawer.)

    Again...post pics when you get it.

    Mike

  4. This is a basic Noobmariner...from the Noob Factory, with some mods done to it.

    Gen Swiss ETA 2836-2

    Jewelry Outlet bezel insert modded and inset

    Watch Material Pearl

    BKs custom crown set

    BKs date wheel overlay

    Modded CGs

    100_2257.jpg

    Flatonback.jpg

    100_2291.jpg

    100_2292.jpg

    Then I took the works out of the Noob and put them into a new MBK 16610 case set from Eurotimez. Essentially it is a Euromariner.

    100_2305.jpg

    100_2306.jpg

    100_2303.jpg

    The Noob has a shallower rehaut than gen. It also does not have bezel teeth that are long enough and they turn down at too sharp of an angle. The MBK case set fixed those two things. Still need to work on CGs. Noob bracelet fits the MBK case better than it fit the Noob case. I plan to get a gen insert and pearl...also gen crown and tube.

  5. If he changed the dial and hands a couple of things could happen...if he doesn't know the correct way to set the hands.

    1. Simplest thing. Second hand could be dragging lightly on the back of the crystal. Easy fix.

    2. Could have set the hour hand down too far and it is dragging on the dial or just around the hole, although this will most likely stop the watch.

    3. Second hand could be kissing the minute hand each time it comes around. Get a magnifying glass and watch it.

    4. Minute hand could be kissing the hour indices.

    For the change to have been that dramatic after the "dial and hands were changed" I'd look at these things first before I'd rebuild the movement.

    MT

  6. Thank you much! I just received the case (MBK 16610) from Eurotimez on yesterday. I believe it to be new. It is not the M Series. Additionally, it does not have a gen-like crown. If it did I would probably leave it along. The crown is more Noob-like only not quite as thick.

    Great info, though. Better than tearing up my new case. No matter how good the case is...if you are not good at adaptation you'll pull your hair out.

    Thanks again. If you have more info from this, please share.

    MT

  7. Tapping the hole in the case takes a 3.0mm x .35 tap. On MBW's it might be a good idea to drill out the case hole w/ a 2.65mm drill bit, then tap.

    Crown is the 7mm, 24-703-0, tube is the 24-7030-0, the last 0 denotes ss.

    Might not be a bad idea to pick up the little wrench tool for installing the case tubes- Ofrei and Jules Borel have them.

    Taps can be bought for less if you look on line- do a search. Maybe $6 ea plus s&h- beats Ofrei and JBorel! Easy to buy a couple at that price.

    I've beem doing well recently with the aftermarket casetubes that Mr. Slimeball sells (wholesaleoutlet990). Jewelerstools sells used 24-703 crowns- cheaper the more you buy. Used to be able to buy them for $20 or so on the bay, now maybe $35. I still haven't the guy over in HK w/ the $14+ crown and casetube- it would be nice if those are decent copies!

    Alligoat, Are you saying that a gen-spec tube will not screw in an MBK/MBW case? I just received an MBK case set from ET and one of the things I want to do is change the crown to gen-spec tube and crown.

    Thanks!

  8. If you are in the CONUS, then you can buy the $98 watch, get a gen Swiss 2836-2 from Otto Frei for $138 and you know what you have. You will need hands. Get Noob hands for ETA from BK...$20 shipped in CONUS.

    I have both gen and clone. They are both good, however, when you wind the gen it is like butter...smooth and quiet. When you wind the clones they seem to be clunky, almost like the gears aren't meshing good. I have also had to reassemble the keyless works on the clones...not the gens.

    Just my $.02.

×
×
  • Create New...
Please Sign In or Sign Up