aeromatic

Yes im thinking the harley insert does look great i just changed the orange pearl to white

No bother at all my friend ,i used the ruhelena 6538 case in the end they said that i could not fit the 2824-2 in there case without a dial spacer but it fitted ok without , i have the rafflestime red insert on at the moment it fits ok on the ruhelena case and the red insert fits on the raffles/cartel 6538s ok ,the movement ring was supplied with the 6538 case i had a problem with the height of hand pinions the minute hand was catching on the raised dial markers we fixed this by slightly bending the minute hand upwards to clear the markers it can not be seen at all only with a lobe, the stem alignment was perfect no problems there i have also ordered from another ebay seller a gold font red insert just thought it might look great with the guilt dial im waiting for that to come here is some photos with the red its not fitted properly as i dont have photos with it fitted got some great tudor boxes from ebay seller gives the finishing touch i think

Nice build! im building a 94010 blue snow flake at the moment im waiting for insert ,raffles clasp ,clarkes crystal,and gen crown/tube to arrive ,im looking for a folded bracelet for my build yours looks great i will have to check out joss bracelet ! jmb made a super job on that backcase my backase is also being engraved by jmb ,there is a guy on ebay from hong kong sells great tudor watchboxes i ordered a couple from him makes a nice finishing touch !

Im using an old 2783 eta for my new 94010 its the only movement i had stuck in a drawer that accepts my blueflake dial feet ! its a slow beat movement im not sure if its 18000 or 21600 bph, the beyeler dial will not fit on a 2824-2 or a 2846 due to the dial feet spacing !

So who do i contact, Site,email to order a bracelet ? please my snowflake project could use a folded

Super work . i recieved my cartel 1680 watch and started stripping it down im using the case for my snowflake build unfortunately the bezel assembly fell off the brass retaining ring is missing i am only keeping the case i was planning to reshape the cgs but on this watch the cgs were good and not the stubby type i will fit a 2783 eta in place of the 2846 as the 2846 does not fit my snowflake dial feet i wiil fit a gen crown/tube and clark crystal i will need to do a slight mod to accept the 26mm dial the parts decarded have gone to my watchmaker friend member Georgeloiz for his future projects i thought the redsub dial was nice for a cartel watch !

I prefer to find an aftermarket insert off ebay that has the correct pearl often for around the same price as the pearl

I just ordered the 2846 trusty 1680 i also used the puretime 1680 for my 5513 these are from the same factory and the watch fits a gen spec dial (26mm) without mods due to the rehaunt ridge shape i believe that this cartel is the best available for small money and with reshaped cgs and gen crown the case is very close to the gen i actually kept the cartel bezel but this can be changed i have ordered a clark crystal so i will find out if it fits soon i have a home made crystal on at the moment your watch does not look like one of these but check to see it it takes a 26mm dial

yes it is if there is no takers i doubt it though i will buy it!

here is my 5513 as it is now with gen crown and reshaped cgs

I find that the yuki insert is a very good match not only the fond but when faded it has the same blueish tint as a gen, cartel inserts faded look grey/silver take a look at my 5513 build on the left next to a gen on the right from 1965 the colour tone and fond is a perfect match

I think that the seller changed his mind and has the right to remove an item he is selling they may do this if they feel they under priced it , i also if the seller tells ebay for instance that the item is no longer available ,been damaged or not as described ebay would be forced to remove it leaving the seller to relist the item at a higher price later . these are my thoughts correct me if anyone doesent agree !

Back to the Bay homage for sunday! still looking for a burgandy dark red insert ! The gen 2824-2 tudor rotor is running smoothly after a full service rafflestime tudor clasp on order will replace the rolex clasp.

It was the rebar,nails, and wire that gave it away ! we use a lot of concrete in cyprus i built my own house with a concrete frame to withstand earthquakes C25 & C30 grade ! i have been in the building trade all my life quantity surveying ,materials laboratory, and building contracting !

This happened to me a couple of weeks ago with a coffin top vintage rolex box i was the highest bidder they told me it was removed to protect the buyer!

who does the best snowflake hands?

Thanks i see you know your thing about tudors thanks for the info !

Thanks gavidoc! i have both 2784 and 2824-2 eta,s the dial im using is a 94010 flake i will have to replace the tophat on the cartel case im using i can not find a gen tudor so i will try clark crystal i see so many different crystals dome and flatter types .

Sorry for bombarding you with questions ! did the blueflake 94010 come with tudor clasp and rolex or both? also im planning to use a 2784 eta would this be correct for the 90410 period the 2784 fits the tudor blue flake dial perfectly the case im using for the build has a 2846 eta which correct me if im wrong is not correct for a tudor sub i dont know much about the tudors, thanks in advance ! the 94010 was fitted with rolex logo crown only?

building Construction contractors office ?

Thanks gavidoc ! so i ca not use the rafflestime clasp on my 94010 build?

Thanks panarai153 ! which watch was fitted with this style rafflestime clasp?

Dont worry its on there on a trial basis only just to see how it feels ! the guy who made the case is working on a black bay version 6538 and i have asked him when parts are ready to send me a burgandy insert and blackbay crown too ! so the homage will be closer to the bay !