rolli

i also have H-factory pams, but the movements are quiet.

all movements in all my pams are quiet.

if there would be any noise, next day it would go to my watchmaker.

rolli

movement dry = loud

movement with revision / service = quiet

rolli

5218-201A Logo

rolli

5218-207A Slytech

rolli

may never happen.

with the correct tool for the specific hand type it never happens.

but when a amateur is on this work, then it can be that everythinbg can happen.

amateur is amateur and not a profi.

ziggy is a profi, i have never seen like this from him and heard never from other members.

he would never send out like this.

he is watchmaker.

my watchmaker is master with certificate and an absolutely profi. always top work is his premise.

use always a profi and not a bodger.

rolli

PreA Straps.

rolli

example of my pvd service.

rolli

please ask in the rolex area.

http://www.rwgforum.com/forum/143-the-rolex-area/

rolli

this 005 version is made by another factory.

rolli

but this is a long story

rolli

have much pleasure with it,

and let it grow with the next gen parts like handset, oem crown, sapphire etc...etc...

rolli

great.

here is our bruno vintage strap collection with the same leather sort.

made by the same strapmaker in castelfanco di sotto / italy, like the ferretti bruno straps.

http://www.rrstraps.com/page43/page34/page3/page3.html

scroll down on this page.

rolli

PM sent

rolli

No probs R

Its defintely that measurement got the same again... trying it numerous times mate but please allow +/- 0.03 tolerance

I also measured it with a couple of rulers and both were over 4mm less than 5mm

A = 7.53

B = 4.57

C = 1.07

D = 1.65 (measured from edge of bezel to edge of case...not along the angle)

E = 0.59

F = 1.23

dear pete,

the measure B must be rather 3,57 mm ????

could you check it again ???

rolli

No Probs Rolf

If you need any other measurements or angles just let me know

heartfelt thanks.....pete

of course it helps a lot.

rolli

A = 7.53

B = 4.57

C = 1.07

D = 1.65 (measured from edge of bezel to edge of case...not along the angle)

E = 0.59

F = 1.23

Best I could do mate... hope it helps

many thanks for the advice.

of course the genuine one.

rolli

You need them from a gen or rep?

hi everybody,

i need some measurements of the genuine pam 104 or similar auto pam.

see images enclosed.

case body tallness = measure A

bezel tallness = measure B

bezel upper edge beside the sapphire = measure C

bezel lower edge = measure D

upper lug-horn step to case edge = measure E

upper lug-horn step to case edge = measure F

it would be very nice you could help.

also a reply via PM is welcome.

many thanks

rolli

perfect

rolli

great...

wear them well...

rolli

if you need another dial and hands

rolli

i used them for all my radiomirs,

45mm + 47mm

sit nearer to the case.

looks perfect.

rolli

Anyone tried those Panatime ones on other Rads? The screws look a lot narrower than the ones that came with my 204 Wempe.

from panatime

http://www.panatime.com/setforrawaba.html

rolli

Wow, this new 386 is ridiculous! Any chance the composite/ceramic case will ever be repped?

no...

this ceramization process coating is not possible.

this case is made of aluminium ( ALMG 1 or ALMG 3 ) and with the composite / ceramization process the alu surface gets a ceramic coating.

and with further processings the surface will be colored in deep dark brown.

rolli

hi everybody,

is there anybody out there with a 318L or 005K who would like to parting out his pam ??

i need some parts.

greetings

rolli

perfect,

it's fixed

rolli

How about now?