-
Posts
2,186 -
Joined
-
Last visited
Posts posted by rolli
-
-
for me this ti crown is much better in non blasted finish.
rolli
-
yes, this is a mega awesome pam.
it is a must in a very good sorted collection.
let's go for it.
rolli
-
-
yes, that's why i said diamond ball cutter.
he can buy it from a dental technical lab.
many dental labs in each city.
rolli
Well - good luck my friend. I had this happen to me - and I say "hey - I will just drill it out and use the springbar instead of screws."
It totally did not work. The reason - is that the screw potentially has a different hardness than the case - and it is hard to keep the damn thing straight.
In the end - I had to toss the case. Very sad.
I was [censored].
-
maybe with a diamond ball cutter from the outside of the lug-horn.
the diamond ball cutter must have a smaller diameter than the thread.
rolli
Hi mates,
Unfortunately, I have broken the tip of the strap screw inside the thread of the case ((
How can I remove it? I fear to broke the thread if I drill inside it...
Any idea?
-
pm sent with interesting 201A disassembled images.
greetings
rolli
-
:thumbsupsmileyanim: :thumbsupsmileyanim:
rolli
-
:thumbsupsmileyanim: :thumbsupsmileyanim:
rolli
-
this would be the best, to banish him...................
rolli
Sorry for my words and all guys know me but this guy Senator is a big a..h..e
He is a complet unseriosly guy
he want buy the VDB and after a lot of attacks and and and
he is banned in more forums and in many disputs with a lot of guy
best is banned him in all
-
please don't use your russian gibberish.
and don't threat members with emails and via phone.
rolli
projectologist: если лошадь в задницу... праву sayin'
we love the way you talk projectologist......
-
i have installed two torobravo crown-guards and i could use the standard crown-guard-screws.
no special screws necessary.
rolli
-
-
hi dom,
it is not fixable the hand to hand distance problem in your 088.
that's why the inside measurement is too deep of all the gmt case types like the 088 model .
that's why the gen movement need the asia distance ring on top,
and that's why the hands sits too near at the dial.
your watchmaker had to grind down the main hand-tubes, so he could install them but very near together and on the dial.
you have to wait for an upgrade case type, 088 upgrade model with an 1:1 asia 7754 clone.
rolli
hey,
thanks for your long comment. i noticed that the space between my hands is closer then the space of the gen pam 88.
i think it is im possible to built a 1:1 rep, otherwise it would be a gen
but i rather have a swiss eta 7754 with a working gmt in my watch (which is reliable) then a ticking time bomb like a asia 7750 with a non working gmt. i think this is worht it, having a smaller space between the hands
i will visit my watchmaker this week and ask him if he is able to fix this issue. i will keep you posted.
thanks again.
best,
dom
-
-
i have two genuine swiss valjoux 7754.
one and half year ago my watchmaker checked all possibilities to swap the asia 7750b1 with the 7754.
he had to use the upper distance ring from the asia7750b1 movt and to install it on the gen 7754
to get the same asia7750b1 movement tallness that the gen movt can fit in the 088 case.
the only problem on this project is,
all swiss 7754 hand-grear-posts are too short, they have only the standard length of H1.
and the master watchmaker chief of eta switzerland told me, there are no longer hand gear posts for the valjoux movements available, never built.
normally the dial sits direct on the movement, but with the asia 7750b1 there is another situation, this movement has on top the distance-ring.
that means, with this distance-ring on the gen one, the dial sits not direct on the 7754, it sits with more distance on the swiss 7754.
that means further, the swiss hand-gear-posts look though the dial only a little part,
that means, the 088 hands cannot fit on the swiss gear-hand-posts.
only the small second hand can get a reworking with a longer hand-tube, but not the other main hands.
for the long minute hand you can build a cap, that the hole on the minute hand will be closed.
but the minute hand, hour hand and the gmt hand would not fit on the main hand-gear-posts.
on your pictures the hands look, that they sit too near on the dial and between the hands are not enough space.
it is not the gen like space between the hands.
but if you used all asia hand-gears with the longer asia posts, then you have not a real swiss movement,
then you have a asia / swiss movement with the bad precision.
you also could keep the asia movement without this annoying work.
all these procedures did mywatchmaker for me and the result wasn't gratifying and fertile.
i'm waiting for a new upgrade 088 case type, that a 7754 would be fit without a complication like that.
note: see the three images of the genuine pam 088, and see the space between the hands and to the dial how it should be !!!!!!!!!!!!!!!!!!
rolli
-
hi all,
here are 5 teju lizard straps in pre vendome style with one movable keeper.
1.) silver grey with pam 5218-218A pvd
2.) burgundy with pam 5218-201A logo
3.) dark green with pam 5218-205A slytech
4.) pigeon blue with pam 5218-207A slytech
5.) linden green with pam 001 pre-a
take a look also here.
enjoy……………….
rolli
-
the bezel types with 12 and 60 clicks/stops will be produced new.
rolli
I heard second hand he is aiming for June. But whether it is 2010 or 20111....
-
hi all,
1.) completed and released is the new 24mm and 26mm bruno cognac serie
2.) vintage serie is new
3.) furthermore new prev teju lizard straps in many colors,
take a look.
many greetings
rolli
Bruno Cognac:
Bruno Cognac Light:
Bruno Gognac Dark:
-
you say i have pictures stolen.
your statement is totally wrong.
yesterday you have received two PM from me, i have asked you, which pictures i have stolen,
and to date no reply from you.
what kind of behavior is that ???
1.) pictures from the tanneries with the tanning drums:
i have the permission to use them !!!!!!!!!
2.) pictures with leather skins from us and from tanneries:
i have the permission to use them !!!!!!!!!
3.) pictures with machines and tools from our leather manufacture:
i have the permission to use them !!!!!!!!!
4.) picture from ponte a egola, one of the tannery area in tuscany.
our camera shot !!!!!!!!!!!
rolli
ps: today i've seen he was reading this post, but no reply on my questions.
please change the pics in your "making of" section, stolen pics from other boards !!
-
sorry andy, it is the wrong pvd color for your watch.
and i only take the luminor pam cases like the pre vendome, pre-a and a serie cases.
my pvd attachment rack has only the attchments for the pam case single parts.
and this rack is full.
for other case types i would need a second attachment-rack with case typical attachments.
greetings
rolli
Rolli what would be a rough price for a deepsea case and bracelet sent to you in parts so no disassemble required
-
hi uby,
yes it's true.
it's the same like the gen once.
but between the different gen panerai pvd models are small color differences.
that's why sometimes panerai changed the pvd company and sometimes the bead blasting intensity
is not always the same in terms that the employees changed their blasting method.
for my blasting intensity i control always that the same employee makes the bead blasting.
we have all blasting and pvd machine adjustments on data-sheets.
so i can guarantee the same quality.
rolli
The PVD finish is just stunning! A beautiful work of art!
-
yes, we do what we can....
rolli
Fantastic Rolli! What a beautiful addition to your outstanding collection! I am jealous...
-
that's a super amazing crown.
the accuracy in the case-tube with a perfect slide-contact in the o-ring gasket.
it is a super wind-up feeling.
compliment,
i like it
rolli
-
different costs.
pm welcomed
rolli
Cost???
SL T48 crown update
in The Panerai Area
Posted
absolute perfect.
leave it like it is,
without blasting is the best.
and the steel one must have the same look without the heavy polishing.
rolli