rolli

in my 036 i have a genuine original unitas not eta unitas, original unitas new made of NOS parts, same like the pre vendomes but without any engraving, only brushed plates. but since 2 years i have genuine swiss unitas back bridges in brass without any engraving direct from eta, 3 movt sets bridges. one time i will start the little word panerai laser engraving project with this bridges and it also gets the rhodium coating, and then i will buy more of the bridges sets from reta. then the gen swiss movements get the correct bridges. this project is then for sale, or my watchsmith makes the installation on the gen swiss eta unitas. rolli

082 is ready in oem swiss standard and quality, pics will follow, 036 is in production in swiss standard oem, with original 036 surface paint and with genuine original tritium resin varnish which was used in all T-Dials. 201a in beginning phase etc.. at the moment starts the swiss basel world trade fair, regards rolli

a wonderful will come amen rolli

036 vector graphic looks amazing and is ready for the dial production regards rolli

what is the problem, from beginning to collect pams my watchmaker used H3. i was never in doubt it could be the wrong decision. h3 is always good. the old FGD dials with back plate got h3, because between the dials made my watchmaker a thin foil, that the dials thickness became 1,0 mm. i never thought about it, whether it is perfect to use H2 mixed with H3. H3 is always standard with me. and always better is, to keep attention to polish the cannon pinion tip. the omly thing is, that my watchmaker had to shorten the minute hand-tube, otherwise the minute hand came not deep enough on the cannon pinion that the polished top is accurate plane with the minute hand on top. so.. the minute hand came a bit nearer to the hour hand. and this could be that the meaning is, ohh here could be a mix of H2 + H3. no complete H3. in the watchmaking is always given the possibilty to make the one or other reworking to get the final wished result. regards rolli

note: gen dials and our dials have a thickness of 0,98 - 1,0 mm h3 is the only possible to have a tasteful handset distance to the dial. don't use different extension gears. rolli

the dial is 1,0 mm for handwind unitas movt, cannon pinion H3 regards rolli

after the 036 yes rolli

i am always there. 082 is ready and 036 in process. and all additional dials after the 036 will be made step by step. regards rolli

did forget to mention. note: high end oem dials must be the clichee made of stainless steel or made of glass, and the lettering recess will be made with deep etching. the letter / lettering edges are professional straight and accurate. but for the standard print for promotional products or standard industry prints, the pad printers use a plastic cliche, but this is not usable for precision oem dials. and to know is, a stainless steel or glass clichee costs minmum € 120 - 150,-- regards rolli

maybe you all remmeber what i said ??? only a dial maker with oem swiss certificate can produce in the oem style and quality, also for the print. this pad printing profession is a hard trainee profession and our has his master certificate. and for our dials we have an engineer for all this dial work and long time employees with skills and experiences. this is not a sooo beside work. top products need top maker. also for the vector graphic, the print clichee brings tolerances and the final print brings tolerances, and always important to use is swiss berlac AG paint for dial print. it has the special viscosity and consistence and it is only made for the dial print. no other paint can printed so exact. and the tolerances, you have to regulate it in the vector graphic before you start. and also here only a professional graphic designer for technical design can make it perfect. all other doings and persons are tinker and only bad hobby. regards rolli

too much poeples too much rumours i have all pre vendomes and all the other preferred pams and i nnedd all the dials for myself and for FGD , so we will make it for us and for the members with a pocket full of money. rolli

already on the to do list in oem quality swiss standard rolli

use 800 up to 1200 fine sand paper. rolli

to produce it top accurate, already on the pre vendome dial list, more in the end when all other are ready. rolli

here are new pictures with te new davidsen dial with FGD hands and new caseback from the year 2009. strap: our own production RRStrap Bruno Cognac, made in tuscany italy for RRStraps. enjoy rolli

also on my dial project list rolli

we got the original dial surface berlac paint, vector graphic almost ready with all details, looks perfect, original B-serie details. it will be a perfect quality oem and perfect looking dial with a indxe filling in domed shape....hahahaha and this is still top secret my friends... it must be still a little bit excitement for ....what does it mean and what can it be. rolli

looks accurate made and great for me compliment R. rolli

and a rolli / FGD high light will come that means, keep your casesets. rolli

and shrunk again 'n again............ rolli