klocklind1

Have anyone tried this link today? It seems as if You can see his latest LV blog but now You can NOT see the pictures!!!!!!!????

YES I was wrong...........jiiiiiiiipppppiiiiiiie! I hope that we do not have to wait too long to get one! George said that he can only build 3 LV a day!!!!??? And BK told me that the bracelets was the SAME as the sub V2 (but that was BEFORE he got the cases so lets hope that they are better !) but we can hope that they are better than the V2 ones!

Sorry to say it ! BUT ALL the pictures on his log is from the GENUINE LV ( he use thoose parts to build his LV sub 1 ) NOT the one he has build!!!

On the WM9 sub v2 case You should use the 2836 movement because the 2824 is the wrong hight ( BK told me that !) You must have a movementholder for the 2836 movement also! The LV sub ( from WM9 !) has another case than the V2 sub with the 2678-2 movement.

You ALWAYS finds something to mod with Your subs!! Thanks for posting it

Panatime has 24mm titanium clasp ( sandblasted finish! But You can also buy a 24 mm titanium one from DSN but then You have two Panerai logos engraved on it (but that is easy to remove using snadpaper! In 22 mm DSN has both with and without the engraving on the titanium clasp. And a 100% titaniumclasp is a MUST if You have a titanium watch!!!!!!!!

On some of the earlier GMT:s the red arrow was smaller so this one on the picture can be a little older than 1972!

Here is a picture of the difference of the two set of hands that You can buy! The one to the left ( it is ONLY the minute hand that is different, and correct on the dsn !) is a DSN! You can see the difference in picture P1070001 that has the wrong minute hand andpicture 1070725 that has the right minute hand!

VERY nice pam You got there! But I think You need hands ( hour/minutes!) from DSN as he is the ONLY one the most accurat hands ( exept for the lume. as dsn has C3 lume and it should be C1 )for 127 and 217 pams!

That was the most beautufyl pam111 I have seen What AR is it on it? Is it Little hero movement in it ?

Hi Cats! I have a GMT with the black bezel like that one and I I pretty shure it is genuine. Mine is from 1972 ( I also have the 11 72 stamped in the caseback,wich mean that it is made in 1972, I have the original chronometer certificat and that is stamped 1972! ) But It was not that kind of bracelet I think, because mine has the older rivited bracelet! I love my watch, it is a beauty for shure and I like the BLACK dial more than the pepsi one!!

It has hands from DSN that has a good lume and the dial lume is quite nice as well but sure not at all as good as Vaclume or The Zigmeister! Bur the best choise would be a dial from Little Hero ! It is quit good as it is for the moment, but You never know!!!!

Remember that the Andrew can send You a 127 that is NOT the same as on the pictures!!!! And I got one of those 378$ 127 that did NOT have a swiss eta AND not saffire crystal ( mineral can break more easyly!9 So my advice is 100% go for Davidsen and ask him to take a picture of the EXACT watch he is going to send to You BEFORE he sends it to You.

Thanks ! It is the cartel case and crownguard and T-48 crown and swiss eta!

Hi all Pam lovers! Now I have almost completed my Pam177H project after a long waith ( and absolutely worth it and I LOVE it !!!) on the T-48 titanium crown! What do You guys think about it? The strap is a Hirsch cabon that is waterproof to 100 m !!!!!

Thanks, Ok I will try that then!

Hi there! Can anyone tell me what height of the gasket I shall use for WM9 V1 sub ? I ask because BK is telling me that I shall use C- gasket ( 2,5 mm !) instead of the C-2 ( 3,0 mm!) because the C-2 one is a little to high??? What is the pros saying here???????

Hi all1 Where can I buy a little bit longer screws than the short standard lenght for my crownguard for a pam 177?

Thanks drulee I have one of thoose and I think that I will make a die that fits the crystal! Please tell me when You tried Your presstool!!!!

Hi all pam lovers1 Has anyone removed and put back the crystal on a pam 44mm ( any modell with thick saffire crystal! ) I want to remove the AR coating but am a little scared to take away the crystal as it is always a risk of brake the crystal or gasket!!! So do someone have any advice how to do it ??????

Thanks a lot for a quick answer! Did You take of the crystal before You started or did You remove the crystal first?

Hi all! Is there anyone here that know HOW to removed the replica AR coating on a Pam watch ? And eaven better if anyone has removed the AR WITHOUT removing the crystal!!!!

Hi all! Is it anyone that has a nice and TOBACCOBROWN pam 061 dial to sell to me ?????

Remember that I do not think the titanium bracelet is ALL titanium, only HALF is mad in titanium, the rest is made of steel. The problem is that the steel is polished, so I took apart all the steel parts and used sandpaper to make it look like titanium and thr result looked very good !!! I do not think they make thoose titaniumbracelets anymore!