klocklind1

If You use locktite on a titanium case ( a lot softer then steel ! ) You can sometimes distroy the threads, if You loosen and tighten them to often!.

The case is that the locktite ( ALWAYS use the weakest locktite, there are 3 different ones ! ) will make the screws sitting so hard that You can get bad threads when You loosening them!

And the screws is 1,8 mm in diameter and normally the "standard" screws is 2,0 mm so YES it can be difficult to get longer screws!

I used a little locktite on the backside of the crownguard ( one of the thereads is bad ! ) and that keeps it in place but then it will be a little bit more difficult to take it away again!

On the steel version I think it is a little easier to tighten the screws with locktite but use only a little!

If the screws really HAS the CORRECT lenght then there should be no problems with tighten them!

Hope this helps !

The ones with swiss movements ( with the correct bridges and swanneck is no longer produced ! ) but if You can live with the square bridges swiss movement that is a 100% swiss one with glued "plates" on the bridges, that movement will last a "lifetime" !

Buy the 0117/1950 case as this ones is the best!

And be aware of that You don not alwas get the watch that You see on the picutres !!!!!

And the last thing is that the crystal can "explode" sometimes. The only crystals that is dood is the ones from Davidsen (DSN!) and the early ones from Eddie Lee and DSN wants 120$ for a crystal !!!

Hi there!

Thanks for the advice !

Is that a DSN crownguard on the picture ?

Do You have any idea of how much Davidsen want for a crownguard ?

Mr Davidsen drives me crazy with his ways sometimes. I think I have recounted this before, but my 2nd Pam was one of his 055's and it has a slim CG on it. I managed to damage the CG pretty seriously so I asked him if I could buy a new one from him. He was really nice and he sent me one free of charge. This turned out to one of the thick/fat ones that you want and the thing was it couldn't get it to fit. So I ended up buying a new slim one when I ordered my 229 from him. Now I have been doing some work on my cartel 177 and tried to fit the thick one on but it needed work on the screw heads and holes. So they do fit , unlike some of the CG's used on his auto, which wont fit as the holes are actually closer together than that of the case. I don't have a picture of it on my 177 but I have this , note that it is upside down My advice would be if you really want one ask again saying that you've seen one etc Best of luck ST4

Thanks for the advice but I have already asked him ( DSN ! ) and he says it ONLY fits HIS casees !

The new Ti CG's i've seen DSN produce have been very very thick. They look really really good IMO. I'd send him an e-mail and see what you can get!

Hi there!

If anyone has a fat and nice crownguard in titanium to sell for my Pam 036 case I would be VERY happy !

Every thing looks VERY good BUT (a small one ! ) the text on the titaniumclasp should be SMALLER than the one on Your one !

If You buy the 127 from Puretime then the movement You see on the picture will probably NOT be the one You will get because that finish on the bridges is VERY difficult to get these days!

You will probably get a e-series movement that has a much more rough surface on it NOT as smooth as the one on the picture!

Check the sales section, and ther was one with the SWISS movement for sale a little more than a week ago!!!!!

VERY VERY nice watch

I am working on my Pam061 to be nice one at the moment !

Thanks for that info

I will check there as well

But Cousines takes so much for the shipping about 10

If I want a plexiglass ( plasic ! ) crystal, where can I get one, they costs about 10$ ?

I bought a Yachtmaster like the one You showed but with a black dial ( they do not exist but is VERY nice looking ! ) in Bejing a couple of years ago!

Check silix prime and check the Yachtmaster there and You will find a ladies one with black dial for 190 $ with swiss ETA like the one on Your website !

Hey all,

My girlfriend has been onto the replica bug for a while, but she has been engrossed in high-quality replica handbags and clothing.

I was looking for a present for her birthday coming up, and she is really eager if I can get her a good quality Ladies Yachtmaster rep with White or Rolesium dial. Personally, i think it is also a really classy looking women's watch in that 'subtle wealth' kind of fashion.

Anyway, I was looking at this watch http://www.jpc8118.com/rlyls10002-white-di...712-p-1184.html and it seems to have all the right bits and bobs, most notably the swiss eta movement which is my main priority. It looks good, but it's much harder to find reviews on the women's rolex's than it is for the men's. Can anyone give me any feedback as to whether this is a good rep?

By good, I mean first and foremost that it won't fall apart and will keep running reliably. Also, that as far as replicas goes, it will withstand most scrutiny except of course from those who are absolute watch fanatics.

Thanks for the tipp but DSN takes 100 $ for a crystal and I think my friend is not willing to pay that much eaven if he likes the watch a lot.

It is a 0117/1950 case so a dsn crystal will probably fit !!!

send an e-mail to DSN (Davidsen) - he has got some real sapphire crystals with AR coating for the PAM127....it's a nice upgrade

Before you get one you should see with other more expert members if DSN crystal fits other fiddy cases or not...I had a PAM127 w DSN crystal installed on, but I am not 100% sure if it fits all the models...

Hi there 1

I bought a Fiddy ( Pam127 ! ) for a friend and now the crystal has "exploded" so I think it was a mineral crystal one, because it feels like that when You knock on it !

I know You buy a plexiglass crystal for it !

Where can I get one of thoose and WHAT messurements/partsnumber is it on that crystal ?

Please help me !!!!

Thats is a Vacheron !!!!!!!!!!!!!!!

I bought a separate dial/hands ( from Puretime /Angus ) for my Fiddy last may and that one had superlume from the modder "Flav" ( and I have got confirmed that Flav has sold the C1/C3 lumemix to Angus at Puretime ! )

And that dial has VERY good lume !

But In september 2008 Angus told me that he did not so much left of that lumemix ( from Flav )

YES it IS a really nice Omega !

Be carefull IF You buy a new one with swiss Eta 2824-2 as a lot of dealers want the swiss movementprice when they actually only sell it with asian clone movement!

I thought that the Pam 036 was stopped beeing produced long time ago !?

It can be VERY difficult to get a good dial on the 036 as the color on the dial or lume is way off !

Be careful with ALL titanium pams as they are not made the same way as the earlier titananium pams!

Anyone heard about this site ?

http://www.xyxyxy.com

Hi there !

I am woundering if anyone has tried to put the Silix PO dial ( 45 mm ! ) on the UPO ( from the cartel ! ) ?

I know that the logo is the right one on the Silix dial and not on the UPO but is the other parts of the siix dial good enough so it is worth change the "whole" dial instead of just the "omega logo" at 12 a clock ( with the risk of scratching the dial ! ) ?

And also the caseback on the Silix PO is more like the genuine but You do not look at the back of the watch so often ???

Has anyone tried to mount the silix caseback on a UPO ?

Nice watch !

I thought that You could not buy any Pams titanium anymore!?

Any pictures of the back ?

Forget to ask if anyone can show the same pictures but from the WM9 for a comparison

That was a very nice and intresting comparison, THANK YOU for that

Hi there !

Is this the movement that George has in his Yachtmaster ?

From Cousins UK !

http://www.cousinsuk.com/searchresults.asp...rchtext=chst18m

WOW

I think I have have a world with BK about my WM9 v 1,5 from PT !

But I do not know if I have to change the crystal as my have the lastest crystal with almost invisible lasercrown !

The RWG is a good place for eveyone that has watches as a hobby both genuine and replicas !!

I also hope it will NEVER die !!!