janeto72

Hi everyone.....if money was not an issue and you wanted to purchase the "best of the best" aftermarket Vintage rolex daytona 6263 V72 stainless steel case, which would you go with? There are some criteria it needs to meet. 1.) Must accept gen bezel,pushers,crown/crown tube and crystal 2.) Must accept gen 571 endlinks 3.) Must accept gen caseback 4.) Must look very close to gen case thanks in advance!

1.)new sel with bracelet and gen looking crown on the clasp...in the works 2.) new date wheel overlay true to gen with raised gloss print and white background.....in the works 3.) sapphire domed superlumed pearl true to gen...in the works Get a BIGCROWN gen spec with soft edges sapphire crystal w AR coating under the cyclops and you will have the best sub in town. Join THE TC SUB CLUB!

tc sub hands down....

So I am looking at the movement.the orange second hand is ticking pressing the pusher at the 2 and 4 positions does not stop the orange hand or reset it to 12 o'clock...Does the orange hand keep going all the time?Even the sub dial chronos don't reset? There ha sto be some sort of reset switch to reset everything....no? Oh and one more thing...the datewheel only changes at midnight. I can't change the date manually unless I cycle the hands one full day. Is this correct? so confused as I have never worked ona 7734 and am not familiar with function.....

great can't wait for the response for the handset!

i figured...thanks bro...

question how do you reset the chrono functions? Does anyone have a tutorial on how to use the chrono pushers?I can't tell even if they work on my 7734?

Yes...i am in for sure! One set for me too!

Ya i tried pinching them too and it really didn't help....

don't wanna plug the repeek site here...but is the site down? I can't seem to access it the last two days?

Hi everyone, i am in the process of finishing a build of a tudor monte carlo....i have a set of DW hands for the sub dials and they don't fit properly......12 hour hand just sits loose and spins......and 45 min hand a little tighter but is still loose....any sugesstions? Can't get the DW hands anymore.....can i try some different hands or what can i do to use these ones....As well, is the stem on the 45 minute sub dial thicker than the 12 hour stem? thanks in advance....

DW is done...not MIA. There is no more DW anything unless someone else sources the cases.....

what is that device measure?

You can fit a gen dial easily into the TC SUB. You will have to cut the feet off and glue the dial to the ETA 2824 movement with dial tape or glue.Or you can use a SA3135 movemnt with a gen dial.Just drop it in.Make your you get the new version SA3135 with thicker crown winding stem. The old SA3135 stem is weak and breaks easily. The new sten does NOT work in the old SA3135 movement! Or you can just drop in a gen 3135 Rolex movemnt with a gen dial and call it a day! Hope this info helps!

Hate to tell everyone but DW is no longer selling any reps....no does he have any dw cases or tudor cases left..........

here are the specs: gen domed tropic 21 crystal gen bezel gen dial gen hand set gen pushers gen tube gen crown gen caseback gen 571 endlinks gen 78350 bracelet gen serviced valjoux 72 movement I have aso called japanese case; but am not sure how good it really is.If it doesn't pan out with this case I try the DW case and Phong's case.I also have the ability to seal the holes in the cases and redrill/retap them to fit gen endlinks.......

TC watches is found on the other rep site "www.repgeek.com"He is a supporting vendor. On another note. WM9 unfortunately did sour our trust. There are new owners now of the WM9 factory and any we will slowly start seeing more of the product line come to market again.....

omega, you right.only the bezel insert needs to be changed...it really is that perfect....!

this is not fair... i'll tell you right now I have over $6000.00 into my V72 6263 build.I figure once it's done it will have run me about $7500.I hope you have deep pockets .Good luck with your search....have fun and enjoy the hunt for your dream 6263...

speaking of 7032's....what is the best combination of hands to use? I heard DW sub dial hands and Yuki hou/minute/second hands....Is this correct?

TC Sub V4 v series......

The best sub rep right now is the TC SUB. It is available from TC watches.It is actually the wm9 V4.It was sourced by TC.

Does anyone know where I can buy the bestaftermarket 6 piece hand set for a 6263 V72 Daytona? I have seen some dealers on ebay, Yuki,Phong....anything better? thanks in advance gang....

You want the best...go with the TC sub....

TC, on reps it is an epoxy. There are different epoxy covers from cheap clear epoxy to a better UV basedso the epoxy doesn't yellow.On gens.....there is a clear sapphire lens over the luminous dot.The sapphire lens are prone to fracture.....