lanikai Posted January 28, 2010 Report Share Posted January 28, 2010 First.. the rep as is.. is not a very good replication of the "Tantalum" metal.. mainly the colour is wrong.. but in an effort to 'aid" in the colouring of the Ti.. and make it closer resemble the mineral Tantalum.. I oxidized it.. to a greyer look with some faint hints of bluing.. below is a brief explanation of the metal "Tantalum" A rare, hard, blue-gray, lustrous transition metal, tantalum is highly corrosion resistant Tantalum occurs principally in the mineral columbite-tantalite. Tantalum ores are mined in Australia, Brazil, Canada, China, Congo, Mozambique, Nigeria, Portugal, Malaysia and Thailand. The name tantalum was derived from the name of the mythological Tantalus, the father of Niobe in Greek mythology. In the story, he had been punished after death by being condemned to stand knee-deep in water with perfect fruit growing above his head, both of which eternally tantalized him. (If he bent to drink the water, it drained below the level he could reach, and if he reached for the fruit, the branches moved out of his grasp.)[12] Ekeberg wrote "This metal I call tantalum … partly in allusion to its incapacity, when immersed in acid, to absorb any and be saturated. Tantalum was discovered in Sweden in 1802 by Anders Ekeberg. Now taking this as a hobby and in no way meaning this will "fool" anyone with knowledge of the metal.. let alone the Panerai brand.. it was fun to try and come close to this rare metal with the stock Ti metal of the rep.. actually a nice contrast with the ss of the bezel and CG.. It is on a Mario Paci "Tantalum" strap.. thanks for viewing.. I need to redo the oxidation in a way to leave behind more bluing.. like this Thanks for viewing.. AC/Lani Link to comment Share on other sites More sharing options...
blackbard Posted January 28, 2010 Report Share Posted January 28, 2010 Quite Nice! And, as always, good photos! Link to comment Share on other sites More sharing options...
PeteM Posted January 28, 2010 Report Share Posted January 28, 2010 I get the feeling that dispite the quality of the pics this combination looks even better 'in the flesh' Link to comment Share on other sites More sharing options...
Bansenshukai Posted January 28, 2010 Report Share Posted January 28, 2010 You know, Lani, I have two of these watches from the time Josh carried them circa 2006. Except, although the movements are actual Swiss Unitas, the plates are wrong - not the Swan Neck type like the one you have here. I never, ever wear them, I've just used their straps for my two other Pam reps. These are actual titanium cases, but the appearance through the display case back was incorrect. Now, I have no idea what to do with them. Do you know anyone that could use them? I want to sell both of them - for cheap, since they are incorrect - but I have no frame of reference. What's your opinion? Thanks, brother. Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Author Report Share Posted January 28, 2010 You know, Lani, I have two of these watches from the time Josh carried them circa 2006. Except, although the movements are actual Swiss Unitas, the plates are wrong - not the Swan Neck type like the one you have here. I never, ever wear them, I've just used their straps for my two other Pam reps. These are actual titanium cases, but the appearance through the display case back was incorrect. Now, I have no idea what to do with them. Do you know anyone that could use them? I want to sell both of them - for cheap, since they are incorrect - but I have no frame of reference. What's your opinion? Thanks, brother. to tell you the truth .. I don't pay much attention to what is in the display back on most reps.. they are always incorrect..that is why I prefer the solid case backs to the display.. I posted a how to "oxidize" .. and with that said .. maybe you will get some PM's for your watches.. they are cool looking after oxidizing the case.. Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Author Report Share Posted January 28, 2010 I get the feeling that dispite the quality of the pics this combination looks even better 'in the flesh' they do.. unless I use photoshop which I don't .. the colour of the Ti will never be what you see in person.. Link to comment Share on other sites More sharing options...
Drulee Posted January 28, 2010 Report Share Posted January 28, 2010 If you want a more accurate display back, DSN sells them. Link to comment Share on other sites More sharing options...
kronos twin Posted January 28, 2010 Report Share Posted January 28, 2010 Lani, these are great. Given that you have a tantalium watch (or at least the watch that reps the metal), which do you think would work well, a The Zigmeister green lume, or a blue one that will match the hand scheme? I ask because the lume color on yours looks pretty good. I'm going to send my 192 to him, but don't know which lume to go with. Link to comment Share on other sites More sharing options...
redwatch Posted January 28, 2010 Report Share Posted January 28, 2010 Definitely my favorite looking PAM lately!!! I have been lusting after one for a while now! Looks amazing Lani! Link to comment Share on other sites More sharing options...
Drulee Posted January 28, 2010 Report Share Posted January 28, 2010 Lani, these are great. Given that you have a tantalium watch (or at least the watch that reps the metal), which do you think would work well, a The Zigmeister green lume, or a blue one that will match the hand scheme? I ask because the lume color on yours looks pretty good. I'm going to send my 192 to him, but don't know which lume to go with. On my 192 I went with the blue lume, I also stuck a new DSN 172E display back to show off the SeaGull ST19 movement I've been thinking about getting another 192, getting it re-lumed with the proper c1/c3 mix and keeping the solid case back on it. Link to comment Share on other sites More sharing options...
StormTooper4 Posted January 28, 2010 Report Share Posted January 28, 2010 Great Photos and a seriously good looking watch Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Author Report Share Posted January 28, 2010 Lani, these are great. Given that you have a tantalium watch (or at least the watch that reps the metal), which do you think would work well, a The Zigmeister green lume, or a blue one that will match the hand scheme? I ask because the lume color on yours looks pretty good. I'm going to send my 192 to him, but don't know which lume to go with. .. blue would be way cool.... I'm sure Ziggy would know the proper colour and finish to the lume..if blue is not the genuine colour and you don't mind it would look really cool.. imo.. redwatch Posted Today, 06:18 PM Definitely my favorite looking PAM lately!!! I have been lusting after one for a while now! Looks amazing Lani! Red.. Nouns Defions.. in this thread is wanting to sell 2 Tantalum's for cheap ..check it out.. Link to comment Share on other sites More sharing options...
rogerwine Posted January 28, 2010 Report Share Posted January 28, 2010 I have a 172 with the old DSN case, where he treated a SS case with Titanium oxide and the result was a very nice Grey/blue cast to the brushed SS. I think works well and the weight is better for the finished product. Rogerwine Link to comment Share on other sites More sharing options...
kronos twin Posted January 28, 2010 Report Share Posted January 28, 2010 Thanks, Lani, and Drulee. I think I'm going for the blue. It would make the dial really bump out of the tantlum-looking case. I'll post pics once it gets back from the Zig-man. Link to comment Share on other sites More sharing options...
OSRep Posted January 28, 2010 Report Share Posted January 28, 2010 Beautiful Lani! Theres always something to learn in every one of your threads. Loving the contrast of the polished bezel, how did you protect it from being oxidised? Thanks bro. Link to comment Share on other sites More sharing options...
PeteM Posted January 28, 2010 Report Share Posted January 28, 2010 I keep coming back to those pics mate. I think it could be the real thing!! (Love that is!!) Link to comment Share on other sites More sharing options...
southcoast68 Posted January 28, 2010 Report Share Posted January 28, 2010 Beautiful job!! I hope to be working on a similar project shortly. Link to comment Share on other sites More sharing options...
rytox Posted January 28, 2010 Report Share Posted January 28, 2010 Wow.. what a nice combination! I love it! Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Author Report Share Posted January 28, 2010 Beautiful Lani! Theres always something to learn in every one of your threads. Loving the contrast of the polished bezel, how did you protect it from being oxidised? Thanks bro. thank you OS SS won't be affected by the oxidizing process AC/L Link to comment Share on other sites More sharing options...
Eton Posted January 28, 2010 Report Share Posted January 28, 2010 Wow, that's a good looking piece!!! Thanks for the pics Link to comment Share on other sites More sharing options...
Drulee Posted January 28, 2010 Report Share Posted January 28, 2010 To give you an idea of what The Zigmeister's blue lume looks like, here it is on my 192 Link to comment Share on other sites More sharing options...
qwest905 Posted January 28, 2010 Report Share Posted January 28, 2010 To give you an idea of what The Zigmeister's blue lume looks like, here it is on my 192 beautiful doc where'd you get that one? Link to comment Share on other sites More sharing options...
prdubis Posted January 28, 2010 Report Share Posted January 28, 2010 Beautiful watch! :-D Lani, is it no problem to plunge the watch in water + Oxyclean for hours? What about waterproofness? Did you unmount the movement and oxidize the case and caseback only? :-) Link to comment Share on other sites More sharing options...
lanikai Posted January 29, 2010 Author Report Share Posted January 29, 2010 Beautiful watch! :-D Lani, is it no problem to plunge the watch in water + Oxyclean for hours? What about waterproofness? Did you unmount the movement and oxidize the case and caseback only? :-) Actually the reps did get immersed whole.. and not a problem.. they are at least gtg in a pot of warm water for an extended period.. I put a soda cap on the bottom of the pot and rested the watch on it.. one sure test... if the second hand stops .. then you'll know you have problems.. Seriously .. should be fine.. Link to comment Share on other sites More sharing options...
Drulee Posted January 29, 2010 Report Share Posted January 29, 2010 beautiful doc where'd you get that one? Bought it from another member here, then sent it off to The Zigmeister to get it lumed. Then I ordered one of DSN's new 172E display backs, along with a 172E, and put the back on the 192 to show off the movement. And since they had been sold as a box set, I figured that having the same serials on both backs was appropriate one sure test... if the second hand stops .. then you'll know you have problems.. Then you can take out the movement and dial, fill it with water, stick a Guppy in it, and a thin straw in the crown tube. Instant PAM fish bowl, blow on straw periodically to aerate. So all is not lost Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now