docdoc Posted January 22, 2011 Report Share Posted January 22, 2011 I start modded my DRSD and drill 1.2mm holes to fit the correct springbars. But I realize when I wanted to put them back on my case (and bracelet) that I need to mod the bracelet too… But I wonder if anyone could enlight me about the bracelet mod ? I already messed up an end link so any advice is welcome or old tutorial (that I didn't find). Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Tiyal Posted January 22, 2011 Report Share Posted January 22, 2011 Good Question, got pics? Quote Link to comment Share on other sites More sharing options...
jmb Posted January 23, 2011 Report Share Posted January 23, 2011 You have to drill the holes in the band ends to a little over 2mm along with the tubes in the end-links. Use very high RPM on the end-link tubes or the bit will grab and break the solder bond loose. BUT, they will probably still work without the tubes even if you manage to twist off a couple... Quote Link to comment Share on other sites More sharing options...
Tribal Posted January 23, 2011 Report Share Posted January 23, 2011 Jep drill them to 2.1mm,I have done it thousand times. Easy to do Quote Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted January 23, 2011 Report Share Posted January 23, 2011 bracelets the easiest part. remove the clasp, put the bracelet in a vise, drill with 2mm and 3in1 oil. the actual endlink widen the loops by hand with a pin vise and the same 2mm bit. Quote Link to comment Share on other sites More sharing options...
Dizzy Posted January 23, 2011 Report Share Posted January 23, 2011 I wish I could do the same thing to my freekin Yuki 7602. Anyone find a solution for those silly endlinks yet? dizz Quote Link to comment Share on other sites More sharing options...
jmb Posted January 23, 2011 Report Share Posted January 23, 2011 Pic of "silly endlinks"? Quote Link to comment Share on other sites More sharing options...
docdoc Posted January 23, 2011 Author Report Share Posted January 23, 2011 Ok thanks guy… I need a vise Quote Link to comment Share on other sites More sharing options...
Dizzy Posted January 23, 2011 Report Share Posted January 23, 2011 Pic of "silly endlinks"? Heres Freddy's writeup on it 7206 Yuki bracelet review by freddy333 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.