sishac Posted May 8, 2011 Report Share Posted May 8, 2011 Hi all - I bought a new clark 116 crystal for my 1655 and I'm having trouble removing the bezel. Can anyone give me any suggestions here. I would think that I just need to run a thin knife blade around the base of the bezel and eventually it would wedge itself in, but nothing of the sort? This bezel comes off, but how? Suggestions??? Thanks - Tom Link to comment Share on other sites More sharing options...
cib0rgman Posted May 8, 2011 Report Share Posted May 8, 2011 you are correct it should come off easily keep trying Link to comment Share on other sites More sharing options...
freddy333 Posted May 8, 2011 Report Share Posted May 8, 2011 Sometimes, you have to use a glass scraper (razor blade in a safety handle) to break the bead of crud or glue that may be keeping the knife blade from wedging between the bezel & case. In some instances, it can take 15-20 minutes of wedging the razor blade around the perimeter before you can get a thin knife blade in. Link to comment Share on other sites More sharing options...
Olivax Posted May 9, 2011 Report Share Posted May 9, 2011 Thanks for the tip freddy! I'm having the same problem Link to comment Share on other sites More sharing options...
Nanuq Posted May 10, 2011 Report Share Posted May 10, 2011 I use a blade from a utility knife. Tap it gently into the crack between bezel and case, working your way around the perimeter. Wear gloves. This will also remove tight crystal retaining rings. Link to comment Share on other sites More sharing options...
freddy333 Posted May 10, 2011 Report Share Posted May 10, 2011 Wear gloves. Gloves? What happened to your usual go-at-em-blind-with-a-sledge-hammer approach? Link to comment Share on other sites More sharing options...
Nanuq Posted May 10, 2011 Report Share Posted May 10, 2011 Gloves? What happened to your usual go-at-em-blind-with-a-sledge-hammer approach? Ah, you misunderestimated me. Sorry 'bout that. I didn't mean for protection against cuts, no no no. I meant wear gloves so your hands don't slip on the axe handle. It's easy to miss. Link to comment Share on other sites More sharing options...
Dizzy Posted May 11, 2011 Report Share Posted May 11, 2011 Awesome!! I also have a 1655 turning into a 1675... just ordered the 1675 bezel set and retainer from Yuki. I tried to get the 1655 bezel off and its on there TIGHT. There is absolutely ZERO gap to get a razor blade into... I tired the usual methods and nothing. I've got a new t-116 coming so Im going to use my crystal press to press out the factory crystal. Hopefully that works. If not then im going to TORCH the plexi and melt it and then the bezel will fall right off... Link to comment Share on other sites More sharing options...
Nanuq Posted May 11, 2011 Report Share Posted May 11, 2011 Oh baby!!! I like your approach a LOT better than mine. You'll notice my bezel didn't pop off either. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now