irolexu Posted October 11, 2011 Report Share Posted October 11, 2011 1680 red sub w/ slow beat eta http://www.1-pc8838.com/-vintage-168...1.html?image=0 I am looking at purchasing this watch and wanted some professional opinion on is this a good point for a real good potential Franken project? If so I plan on getting gen parts and really want it to have a very worn look. What gen parts will fit this model? Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 11, 2011 Report Share Posted October 11, 2011 franken, NO. out of the box + a few lightmods. YES if youre going for a franken project aim higher. if you want some thing to kick around for the weekend pull the trigger. Link to comment Share on other sites More sharing options...
alligoat Posted October 11, 2011 Report Share Posted October 11, 2011 The link won't come up for me- this webpage does not exist.. But basically I agree with highoey, although the red sub with the 2846-2 could be lightly modded into a very nice rep http://www.1-pc8838.com/rlsv01015-vintage-1680-subalternative-swiss-2846-p-8531.html But no one's going to put a real red dial in a rep like this- the cost of a real red dial would be outrageous and that leaves an NDT, or possibly an Ingod44 dial. A gen crown and tube is no big deal and an insert is maybe $100. So you could end up with a very nice rep for $500 or so. If you were to go with a 1570 movement and a gen white dial, you would need to get a better case. 1 Link to comment Share on other sites More sharing options...
dutchguy2 Posted October 11, 2011 Report Share Posted October 11, 2011 I don't know if a gen or clark crystal will fit. But if it does, changing the crystal and crown and some aging of the bezel insert will give you a very niche watch for less than 400 USD. You can even considering reluming dial and hands and aging the dial to give it a more vintage, worn look. So for you to decide how franken you want to go! I agree on the others that this is as much franken I would go with this watch as a base watch. Link to comment Share on other sites More sharing options...
irolexu Posted October 11, 2011 Author Report Share Posted October 11, 2011 The link won't come up for me- this webpage does not exist.. But basically I agree with highoey, although the red sub with the 2846-2 could be lightly modded into a very nice rep http://www.1-pc8838.com/rlsv01015-vintage-1680-subalternative-swiss-2846-p-8531.html But no one's going to put a real red dial in a rep like this- the cost of a real red dial would be outrageous and that leaves an NDT, or possibly an Ingod44 dial. A gen crown and tube is no big deal and an insert is maybe $100. So you could end up with a very nice rep for $500 or so. If you were to go with a 1570 movement and a gen white dial, you would need to get a better case. In your opinion how is the dial? Do you think the white sub would be better? I'm basically just wanting to ad gen crown tube gen insert and soften the case age dial and age insert and also NATO strap Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 12, 2011 Report Share Posted October 12, 2011 id definitely get another dial ingod, or NDT, if available even the mbk is quite nice for a 1680 white Link to comment Share on other sites More sharing options...
irolexu Posted October 12, 2011 Author Report Share Posted October 12, 2011 Does MBK sell a 1680 if so I'd probably go with him...how do I get in touch with MBK Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 12, 2011 Report Share Posted October 12, 2011 Does MBK sell a 1680 if so I'd probably go with him...how do I get in touch with MBK you dont. MBK is a place in Asia, NOT a dealer. their complete watches are not really worth buying since youll be replacing the movement with a slow beat, usually replacing the dial if its a 5513/5512 and the bracelet is not an accurate 93150. Link to comment Share on other sites More sharing options...
irolexu Posted October 12, 2011 Author Report Share Posted October 12, 2011 Then how and where do I source a good 1680? Sounds like the 200 dollar one is my best bet Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 12, 2011 Report Share Posted October 12, 2011 are you looking for an "out of the box" wearer? or do you fully intend to make a project watch that you build over time into something very accurate? Link to comment Share on other sites More sharing options...
irolexu Posted October 12, 2011 Author Report Share Posted October 12, 2011 Both really meaning I buy somethin I can wear but is good enough for heavy modifications if not then I will settle best out of box rep and just mod that. It's probably gonna end up being my work beater Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 12, 2011 Report Share Posted October 12, 2011 if you fully intend to add a gen insert, gen-aftermarket crystal, gen crown, gen dial or aftermarket "refinished" dial. the really start with a good case to build upon and collect all the pieces to finally put it all together. Link to comment Share on other sites More sharing options...
altesporsche Posted October 13, 2011 Report Share Posted October 13, 2011 sorry to but in but what would be an example of a good case here for mods ? the $218 version of the 1680 red sub on perfect clones ? Link to comment Share on other sites More sharing options...
irolexu Posted October 13, 2011 Author Report Share Posted October 13, 2011 A good case I hear come from MBK or MBW or ask around check forums you can source a good case. I plan on nato strapping mine since I have my 16610 for a full rolex wear. Link to comment Share on other sites More sharing options...
Rolexaddict Posted October 13, 2011 Report Share Posted October 13, 2011 (edited) you dont. MBK is a place in Asia, NOT a dealer. their complete watches are not really worth buying since youll be replacing the movement with a slow beat, usually replacing the dial if its a 5513/5512 and the bracelet is not an accurate 93150. can you explain more about MBK and MBW, since a long time I wish to know exactly where to get stuff from these place, I know MBK is a shopping center in Bangkok downtown, right ? For MBW, as I often have read here "MBW this..." and "MBW that..." but never seen a link or an adress to get such cases or accessories. Or this is private infos for initiated people ? Edited October 13, 2011 by Rolexaddict Link to comment Share on other sites More sharing options...
plymman Posted October 13, 2011 Report Share Posted October 13, 2011 Some dealers (I think Narikka is one) can still get hold of MBW cases. They're considered among the best of Rolex cases, particularly the older style subs and seadweller's. Keep an eye out in the sales sections, I've picked up one or two in the past and they'll usually already have had some mods done (crown guard shaping, aging etc..). Once you have one you're well on your way and it's time to start looking for a nice dial, gen insert and crystal and the like. That's when the fun begins.. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 13, 2011 Report Share Posted October 13, 2011 Some dealers (I think Narikka is one) can still get hold of MBW cases. They're considered among the best of Rolex cases, particularly the older style subs and seadweller's. Keep an eye out in the sales sections, I've picked up one or two in the past and they'll usually already have had some mods done (crown guard shaping, aging etc..). Once you have one you're well on your way and it's time to start looking for a nice dial, gen insert and crystal and the like. That's when the fun begins.. i believe the known regular dealers who resell MBK watches stock complete watches from MBK, NOT the cases. you have to buy the whole mc coy and waste 2/3rds of it when upgrading... Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 13, 2011 Report Share Posted October 13, 2011 can you explain more about MBK and MBW, since a long time I wish to know exactly where to get stuff from these place, I know MBK is a shopping center in Bangkok downtown, right ? For MBW, as I often have read here "MBW this..." and "MBW that..." but never seen a link or an adress to get such cases or accessories. Or this is private infos for initiated people ? i guess it is downtown, ask any tuk tuk driver and theyll take you there, just avoid the motorcycle tuk tuks unless death is not something you fear Link to comment Share on other sites More sharing options...
Rolexaddict Posted October 14, 2011 Report Share Posted October 14, 2011 thanks for infos about MBW, the worse with the motorcycle tuktuk, when you stop at a red light with a big truck on the side... most of the time the truck's muffler is on the same level as your face Link to comment Share on other sites More sharing options...
Ephry73 Posted October 15, 2011 Report Share Posted October 15, 2011 Moto-taxies are AWESOME!!! How about the DW 1680 case? Steve claims they can engrave anything on the caseback and between the lugs, E Link to comment Share on other sites More sharing options...
the_rymeister Posted February 4, 2012 Report Share Posted February 4, 2012 Hi guys sorry to drag up an old topic, are the red 1680 Mbw watches that narikka could possibly source good out of the box reps to beat around with a bit of ageing until gen parts are sourced? Does the dial and straps look any good, I would want to keep it on stainless, cheers guys Link to comment Share on other sites More sharing options...
woof* Posted February 4, 2012 Report Share Posted February 4, 2012 if you fully intend to add a gen insert, gen-aftermarket crystal, gen crown, gen dial or aftermarket "refinished" dial. the really start with a good case to build upon and collect all the pieces to finally put it all together. This is the truth. If you want something that you will still enjoy a year from now, start with the best and most accurate case you can find and afford. I know from experience. When I started in this I bought several cartel watches, added the gen parts and as time went along and the more educated I got...I became disappointed in my watches. Then the hunt for better cases began. I look back and really wish I had waited and got more informed before I spent so much money. Keep looking in the for sale sections for an MBW watch. They show up all the time for sale. Meanwhile start collecting your gen parts! Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted February 4, 2012 Report Share Posted February 4, 2012 Hi guys sorry to drag up an old topic, are the red 1680 Mbw watches that narikka could possibly source good out of the box reps to beat around with a bit of ageing until gen parts are sourced? Does the dial and straps look any good, I would want to keep it on stainless, cheers guys that depends. are the 1680s the new model 1680 MBWs that have been shipping out or the old style (not 1680 but 1680) MBWs. the red dials were never good and the MBW straps are less correct than PTs Link to comment Share on other sites More sharing options...
the_rymeister Posted February 5, 2012 Report Share Posted February 5, 2012 that depends. are the 1680s the new model 1680 MBWs that have been shipping out or the old style (not 1680 but 1680) MBWs. the red dials were never good and the MBW straps are less correct than PTs I'm not sure buddy, I'm assuming they are the newer versions, I spoke to narikka and he said he can source mbk 1680 i may see what they are like, don't think I'm going to do a major amount of modding with gen parts but it's always good to have the base where I can mod in future if I decide, and hopefully I can with the mbk version Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now