janeto72 Posted June 14, 2012 Report Share Posted June 14, 2012 Hi everyone, i'm going over to the hardware store to pick up some drill bits to drill out my lugs to 2.0 mm ....can you guys tell me what size drill bit i need ? thanks in advance...... Quote Link to comment Share on other sites More sharing options...
bones Posted June 14, 2012 Report Share Posted June 14, 2012 The end of the springbars are 1.2mm, so I use a 1.25mm drill bit. Quote Link to comment Share on other sites More sharing options...
praetor Posted June 14, 2012 Report Share Posted June 14, 2012 (edited) I bought the #55 drill, which is 1.32mm heh. these drill bits are hard to find in hardware stores Edited June 14, 2012 by praetor Quote Link to comment Share on other sites More sharing options...
Cats Posted June 14, 2012 Report Share Posted June 14, 2012 If I'm not mistaken I've seen some post of members who drill them at 1.3mm Carpe Diem Cats Quote Link to comment Share on other sites More sharing options...
alligoat Posted June 14, 2012 Report Share Posted June 14, 2012 I use the #55 cobalt drill bit from Snap-On Tools. Like Praetor says, this ain't off the shelf stuff. Quote Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted June 14, 2012 Report Share Posted June 14, 2012 1.25mm for me Quote Link to comment Share on other sites More sharing options...
Dizzy Posted June 15, 2012 Report Share Posted June 15, 2012 I drilled mine to 1.3mm because it was the only bit size that I could order. Just dont go any bigger than 1.3 because it will start to look funny. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.