Guest al12 Posted August 28, 2012 Report Posted August 28, 2012 Hi guys, I bought a TC watch set, but the movement that came with it is ETA 2836-2. When I tried to install it in the TC watch case, the stem broke as the crown hole does not aligh. Since it's very hard to get hold of TC by e-mails is my only option is a new ETA 2824-2 movement? Thank you.
irolexu Posted August 28, 2012 Report Posted August 28, 2012 Why has it been hard to get a hold of him? Weird
automatico Posted August 28, 2012 Report Posted August 28, 2012 "...it's very hard to get hold of TC by e-mails..." I sent him a note 8 or 10 days ago wanting to buy some stuff...no reply. Seems like this is the way it is in this 'hobby'.
irolexu Posted August 28, 2012 Report Posted August 28, 2012 He could be in china which would make sense
seafoam Posted August 28, 2012 Report Posted August 28, 2012 You could go with a Sea-Gull ST2130. More available and certainly a lot more cost effective. JM2C.
Guest al12 Posted August 28, 2012 Report Posted August 28, 2012 You could go with a Sea-Gull ST2130. More available and certainly a lot more cost effective. JM2C. I would like to stay with Swiss.
sneed12 Posted August 28, 2012 Report Posted August 28, 2012 Only way to know for sure is to try and fit one.
tessa Posted August 29, 2012 Report Posted August 29, 2012 He could be in china which would make sense Yes thay could be , and they do not have email in china:)
Jkay Posted August 29, 2012 Report Posted August 29, 2012 I would not worry too much. This happens a lot in our hobby ... some little one-man shop creates something special, and is promptly washed off the Earth by a flood of emails .. hundreds per week. Do you want these people answering all email, or working on their special watches? I think we all know the answer
tc670207 Posted August 29, 2012 Report Posted August 29, 2012 That's not possible! I only have eta 2824-2.
Guest al12 Posted August 30, 2012 Report Posted August 30, 2012 How about a nice 2892? Would 2892 fit the TC case?
klocklind1 Posted August 30, 2012 Report Posted August 30, 2012 Hight difference is 0,45 mm between 2824 and 2836
fidhle007 Posted August 30, 2012 Report Posted August 30, 2012 AL12, where did you get this watch set from?
fidhle007 Posted August 30, 2012 Report Posted August 30, 2012 And just for clarification, the TC watchset takes a 2824 and would probably take a 2892 without any issue whatsoever.
fredfree Posted August 30, 2012 Report Posted August 30, 2012 2892 has a different stem height. IMO get a 2824 or a clone if you want to go cheap.
its_urabus Posted August 30, 2012 Report Posted August 30, 2012 To use a 2892 in a case that is made for the 3135 all you need is the right spacer.
Ephry73 Posted August 30, 2012 Report Posted August 30, 2012 To avoid any issues, just source a 2824-2 movement and call it good. The stem height is minimal in difference when using a 2892, but just go with why works. You won't regret it
fredfree Posted August 31, 2012 Report Posted August 31, 2012 To use a 2892 in a case that is made for the 3135 all you need is the right spacer. TC case has a slightly lower crown than Gen, it will take both gen or 2892 but the proper one is the 24... so best go for a 24...
OhOhOne Posted September 11, 2012 Report Posted September 11, 2012 (edited) TC case has a slightly lower crown than Gen, it will take both gen or 2892 but the proper one is the 24... so best go for a 24... Really? The pics TC has posted on his blog seem to show the crown position as spot on to gen. What makes you say this? oo1 Edited September 11, 2012 by OhOhOne
irolexu Posted September 11, 2012 Report Posted September 11, 2012 Didnt he post pics of a gen 3135 in the tc?
fidhle007 Posted September 11, 2012 Report Posted September 11, 2012 Really? The pics TC has posted on his blog seem to show the crown position as spot on to gen. What makes you say this? oo1 It's a really subtle difference but it's there!
OhOhOne Posted September 11, 2012 Report Posted September 11, 2012 (edited) It's a really subtle difference but it's there! I don't know, are we talking about the TC V4 case that he used in his 16610 (which now seems to be sold out)? Can anyone substantiate these allegations, one way or the other? I love my TC sub, so now I'm really curious. oo1 Edited September 11, 2012 by OhOhOne
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now