Got my qc pics what do you think

[xxmanxx]

Here are the qc picks of my noob factory submariner from puretime Everything looks ok but the lazer etched crown in the crystal at the 6 seems off not sure if its just the angle Also on the clasp Is the rolex crown on the part that folds down on the left side of the picture suppososed to be one peice like that as in the space inbetween the points of the crown is basically at the same level as the rest of the crown.

 

 

 

 

 

 

 

 

 

 

 

[xxmanxx]

i think the dial insert needs to be rotated to the left a little what do you guys think?

[importr]

Yes coronet @ 6 is definately off, as is the rehaut. I'd ask for another

[xxmanxx]

Rehaut looks on, but the dial might be off. If you look at the crown compared to the 3 o'clock marker.

yea i was thinking the dial wass off becuase the crown looks even with the 30 but everything is a little to the left along with the markers on the dial at 3 and 9 so it seems like just rotating it to the left moving everything right would fix it.

[xxmanxx]

Yes coronet @ 6 is definately off, as is the rehaut. I'd ask for another

not sure i see anything wrong with the rehaut

[xxmanxx]

just seent them an email about the problems see anything else

[panerai153]

Look at the dial indices at 3 compare it to the crown, it's definitely off. Looks like the dial is about half a click rotated clockwise. If you had a date window, you could really see the problem. i would ask for another one as well.

[lukhard]

Have you really not noticed the biggest problem with your replica?  The engravings on your clasp are just printed on there.  That is completely wrong.  They should be engraved. 

[ceejay]

To me it looks like the bezel is 1 click to the left and the watch has been photographed slightly to the right giving the impression the dial is out.

I would ask for another photo with the bezel lined up correctly.

 

If you put a straight edge through the 9 & 3 markers they line up with the centre of the crown IMO.

 

With regard to the comment on the bracelet engraving... 1st post fail 

[997 s]

Lok at the laser engraving in crystal at 6 a clock U see it is not straight P

[Irontomkidd]

[panerai153]

Everything is out of alignment the dial is rotated clockwise, the crystal is crooked,  the crown etching (Which is way too big by the way) should be centered in the bottom laser line. They can do better than this.

[irolexu]

That looks like a noob factory you should ask sead1999 for the BP model. Far more accurate

[billyfras]

@irontomkid Good illustration, but the watch itself is not straight in the frame. It is turned slightly clockwise in the frame so that makes the misalignment look less significant than it actually is.The crown might need to be turned a half click clockwise or the dial in the opposite. Can't be certain which.

[Irontomkidd]

@irontomkid Good illustration, but the watch itself is not straight in the frame. It is turned slightly clockwise in the frame so that makes the misalignment look less significant than it actually is.The crown might need to be turned a half click clockwise or the dial in the opposite. Can't be certain which.

Good point but I took case measurements in photoshop (best i could) at the pinion, crown guards, and case at 6 to position the cross.

[Mike on a bike]

Refuse it is a gimmie whatever the reason, it is off period.

[freddy333]

Dial location is fine (triangle at 12 aligns half way between the vertical lines of the mid portion of the end link above it), but the insert is slightly off-center (to the left). A common problem.

[flex]

both dial and insert is fine. jsut the watch in that pic is not centrered. the bezel is not also positioned centre. if you move the insert to the left, the bezel insert will be off

[live1]

the crystal is not centred.the crown at 6 is way off.and much to ovibous