Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

What would it cost to get a 1953 Rolex Explorer 6350 working?


tddeep

Recommended Posts

Beautiful! Send it to a company like abc watchwerks, or http://www.watchmakers.com/services.html

And expect to pay anywhere from 3-500 is my best guess. A stem is no big deal and the crown is prob ok once the new stem is in place, just make sure to use a company known for vintage restoration because you don't want that amazing dial and hands to be replaced with service parts. I wouldn't touch the dial or hands at all, with a new crystal or once that one is polished it's going to be really nice!

Link to comment
Share on other sites

Probably not. Do you know what's in there now?

In some cases (pun intended) an ETA movement *can* be made to fit given the right adapter ring. Whether such a ring exists for your case is unknown.

I'm on the hunt for a 1030 movement.

Link to comment
Share on other sites

Amazing old bb movement :) Freddy knows a ton about them, I'm sure he'll chime in soon. Do not change the movement. The parts are available and if sent to one of the know vintage guys they can handle that blindfolded. Have it serviced and the new stem put in, polish or replace crystal and seals, done.

Link to comment
Share on other sites

There is great potential, but cost depends on what is wrong with the movement & what parts are required. In general, I would expect to spend between $600-$1,000+ to put the watch into good, working order. That depends, of course, on how successful you (or your watchmaker) are in located the required parts, most of which have not been made for 25+ years.

6202_deluxe0202__-2_tonemapped1.jpg

 

ToneCurve-MediumContrast1.jpg

Link to comment
Share on other sites

Since this movement pre dates the 1030, I thought I'd google around and see if I could find out which movement it is. A260, A296...

Lo and behold this watch is being auctioned on ebay by Andrew Shear

http://www.ebay.com/itm/1953-Vintage-Rare-Rolex-Big-Bubbleback-Explorer-I-ref-6350-PROJECT-WATCH-/200963868228?pt=Wristwatches&hash=item2eca614644#ht_883wt_1160

At any rate, I agree with cc33 and Tony, Bob Ridley would be the best shot to get it going again.

Link to comment
Share on other sites

I will have to disagree with a couple of people on this thread.  Were I to purchase this watch, the dial would be the first thing to be replaced in a restoration.  I suspected it had been redone (and rather roughly), and the Shear listing that alligoat links to confirms it.  Unfortunately, genuine 6350 dials are very rarely spotted in the wild.

 

EDIT: I also wonder about the originality of the hands, considering how they seem to be too short for this reference.

Link to comment
Share on other sites

If you want it done right, Bob Ridley is your man. He probably has the parts or has sources to find them. Bob is a genuine nice guy and his communication is top notch. He's restored several gens for me, and I was very pleased with the results. He isn't cheap, but in the end, it's worth it

Link to comment
Share on other sites

Would you consider a vintage relume of the hands and the dial, LHOOQ?

Like you say, finding a suitable dial would be next to impossible.

 

I'm only speaking for myself, but having a good-looking dial is of such paramount importance that I wouldn't bother with a relume.  I imagine that a decent dial would double the selling price of the watch, working movement or not.

 

If I could snag this at a low enough price, I'd swap in a good, aftermarket honeycomb dial and put this Explorer in my regular rotation!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up