Ezio Posted November 2, 2014 Report Share Posted November 2, 2014 Since i searched and cant find a answer i ask you smart boys here One of my gens say 50 atm is that safe for swimming ?? Some say no some say yes So now im not sure haha Thanks Ezio Link to comment Share on other sites More sharing options...
dbane883 Posted November 2, 2014 Report Share Posted November 2, 2014 1 Atm = 10 meters Are you swimming 500m below the surface? I think you'll be ok Link to comment Share on other sites More sharing options...
Ezio Posted November 2, 2014 Author Report Share Posted November 2, 2014 Hahahaha thanks D Better be safe Then sorry Link to comment Share on other sites More sharing options...
Mike on a bike Posted November 2, 2014 Report Share Posted November 2, 2014 Ezio , screw in crown or not ? Link to comment Share on other sites More sharing options...
Ezio Posted November 2, 2014 Author Report Share Posted November 2, 2014 Hey screw in Crown but Got a Update somehow it didnt make the pool dives leaked and now Got a broken watch.... You live and you learn Link to comment Share on other sites More sharing options...
Mike on a bike Posted November 2, 2014 Report Share Posted November 2, 2014 I do not go in water with anything rated under 20 ATMs (200 meter/660ft ) professional grade divers keep in mind the test is done in a static environment. Yes the pool may be only 9 ft deep but pressure when you dive or swiming or the ocean get hit with wave bam right on the watch side . I must have at least 10 Gens rated 200 or above so why take chances. My policy is reps do not go in the water period, pool, ocean or shower (nor should any watch should go in there ) but that is just me. Link to comment Share on other sites More sharing options...
jpz5142 Posted November 2, 2014 Report Share Posted November 2, 2014 Ezio - sorry to hear. Same goes for gens as reps, until it's been tested shouldn't get it wet. The rubber gaskets need to be lubed/replaced regularly if your getting them wet. Sometimes gens will sit in the AD's case for quite some time before being sold. Just because we pay thousands of dollars for a Gen doesn't mean that we should forget that mother nature wrecks havoc on seals/gaskets. If it is just a little fogging inside the case open it as much as you can and put it in a jar of rice to get as much moisture out of it then send it off for a service, should be OK after that. Link to comment Share on other sites More sharing options...
436NR Posted November 2, 2014 Report Share Posted November 2, 2014 Hey Ezio! Is that the same watch that you tested first with your DIY tester? Link to comment Share on other sites More sharing options...
Nightwatch Posted November 2, 2014 Report Share Posted November 2, 2014 As Mob said the biggest pressure increase is when You hit the water or get hit - pressure increases instantly. When jumping into the pool or slapping the water hard, You may get over 10 ATM. Multiple jumps increase the pressure build up, which is highest direct from the surface down to 3 and 10 meters. I have a lot of fun using divers reps that passed the 30m test for light swimming without any issue. These are $300 watches,, so even if something happens it´s much cheaper than to repair a gen. Link to comment Share on other sites More sharing options...
Ezio Posted November 2, 2014 Author Report Share Posted November 2, 2014 Great points guys The watch had Water inside almost Like a fish tank just needed The goldfish haha took The caseback off and saw there wasnt Any gasket In it great for a 1k gen so QC on gens isnt Always great either Good point JP never thought about gens as that And no The watch i tested yesterday hold up great and that is a rep funny to Think about 1k gen no gasket 250us rep waterproof haha But what Can i do since it didnt have a gasket never had it open and its only 9 months old shouldnt they replace /repair it ?? Link to comment Share on other sites More sharing options...
436NR Posted November 2, 2014 Report Share Posted November 2, 2014 Great points guys The watch had Water inside almost Like a fish tank just needed The goldfish haha took The caseback off and saw there wasnt Any gasket In it great for a 1k gen so QC on gens isnt Always great either Good point JP never thought about gens as that And no The watch i tested yesterday hold up great and that is a rep funny to Think about 1k gen no gasket 250us rep waterproof haha But what Can i do since it didnt have a gasket never had it open and its only 9 months old shouldnt they replace /repair it ?? Go figure! A Gen with no gasket! Sorry to hear that pal. Link to comment Share on other sites More sharing options...
kbh Posted November 2, 2014 Report Share Posted November 2, 2014 I made a little 3" PVC tube with a hose bib on it and a pressure gauge. My house pressure is always between 60 and 70 pounds and I just put the empty case in and pressurize it to the 4 to 5 atm and let it sit for 15 minutes. Never had one fail on me that passed that test for swimming, boating skin diving (but not Scuba). It's a simple and easy to make home tester. Link to comment Share on other sites More sharing options...
Bomber22 Posted November 2, 2014 Report Share Posted November 2, 2014 I made a little 3" PVC tube with a hose bib on it and a pressure gauge. My house pressure is always between 60 and 70 pounds and I just put the empty case in and pressurize it to the 4 to 5 atm and let it sit for 15 minutes. Never had one fail on me that passed that test for swimming, boating skin diving (but not Scuba). It's a simple and easy to make home tester. Would love to see how you did that Link to comment Share on other sites More sharing options...
kbh Posted November 3, 2014 Report Share Posted November 3, 2014 You could do it simpler but I also put in a Schrader valve so I can use a compressor or even a bicycle pump to increase the pressure, although I usually figure if it can stand my household pressure for 15 to 30 minutes, I'm not going to worry about it in the pool or beach. I'm a firm believer that wet testing it much more accurate than those dry testers, although it does require taking the movement out of the case. Also, if you know what your house pressure is you don't even need the pressure gauge. It would be very simple to make one with nothing more than a hose bib and a piece of pipe When you fill up the pipe with water and pressurize it, it's amazing how fast the pressure goes down if there's even a small leak. Link to comment Share on other sites More sharing options...
Ezio Posted November 3, 2014 Author Report Share Posted November 3, 2014 So let me get that right here you fill it with water put your watch in close pump up the pressure and just look if it goes down ?? I need to try that haha Link to comment Share on other sites More sharing options...
GenTLe Posted November 3, 2014 Report Share Posted November 3, 2014 Great points guys The watch had Water inside almost Like a fish tank just needed The goldfish haha took The caseback off and saw there wasnt Any gasket In it great for a 1k gen so QC on gens isnt Always great either Good point JP never thought about gens as that And no The watch i tested yesterday hold up great and that is a rep funny to Think about 1k gen no gasket 250us rep waterproof haha But what Can i do since it didnt have a gasket never had it open and its only 9 months old shouldnt they replace /repair it ?? Go for the warranty! But don't tell you have opened it. Link to comment Share on other sites More sharing options...
kbh Posted November 3, 2014 Report Share Posted November 3, 2014 (edited) So let me get that right here you fill it with water put your watch in close pump up the pressure and just look if it goes down ?? I need to try that haha Or, take it out in 15 minutes and see if any water is inside the case. If you hook up a hose and open the hose bib, the pressure immediately goes up to about 60 or 70 pounds (roughly 4 to almost 5 atm) Then close the hose bib and let it sit. It will then hold pressure. If there's any large leak it will show immediately on the pressure gauge. If not you're probably good to go. Make sure you take the insides and put them outside before you test it though. Edited November 3, 2014 by kbh Link to comment Share on other sites More sharing options...
droptopman Posted November 4, 2014 Report Share Posted November 4, 2014 I had a pressurized bong back in my 20's that looked something like KB's water tester....just saying Link to comment Share on other sites More sharing options...
jpz5142 Posted November 4, 2014 Report Share Posted November 4, 2014 I had a pressurized bong back in my 20's that looked something like KB's water tester....just saying Probably wouldn't want to dunk a watch in that water..... Link to comment Share on other sites More sharing options...
droptopman Posted November 4, 2014 Report Share Posted November 4, 2014 Sorry, looking at my post again, it does not really fit here. Sorry about that. No disrespect meant. I think the pressure tester is ingenious and resourceful. I was just being funny and well honest... Link to comment Share on other sites More sharing options...
kbh Posted November 4, 2014 Report Share Posted November 4, 2014 Didn't bother me in the least. Been there, done most of that myself..... Link to comment Share on other sites More sharing options...
Mike on a bike Posted November 4, 2014 Report Share Posted November 4, 2014 ditto, would not worry about it droptop we ain't the choir boys here, been there done that to just about anything..................... Link to comment Share on other sites More sharing options...
droptopman Posted November 4, 2014 Report Share Posted November 4, 2014 All good. Thanks guys. I like it here and sometimes what I think is funny might not be to others. Wish I would have used some of that talent back then on other more beneficial activities:). Sent from my droptop using telepathy. Link to comment Share on other sites More sharing options...
GenTLe Posted November 4, 2014 Report Share Posted November 4, 2014 @26 yo I had a 2.5 meter tall weed plant in my garden (just doing coming-out for solidarity) Link to comment Share on other sites More sharing options...
martijnp Posted November 4, 2014 Report Share Posted November 4, 2014 @26 yo I had a 2.5 meter tall weed plant in my garden (just doing coming-out for solidarity) I'm not even 26 yet Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now