Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Can help me take a look at QC photos?


ArcAngel

Recommended Posts

You can go ahead and approve the QC. This is as good as it can get, and congrats on the lovely piece.

 

Hello L, thanks for the reply. Just noticed the bezel area between the "Swiss Made" word is not alighted properly. Seem a little slanted with the alignment with the bottom dial

Link to comment
Share on other sites

Hello L, thanks for the reply. Just noticed the bezel area between the "Swiss Made" word is not alighted properly. Seem a little slanted with the alignment with the bottom dial

Do you mean the 6 o'clock marker? It could be a little off, see if you could get a better piece. 

My unsolicited advice is to be realistic about reps and the QC. Perfection is often desired but hard to achieve. 

I had a watch rejected 3 times because each time they present a watch with the flaw corrected, another different flaw popped up...

In the end, it was a matter of which flaw I could live with more.  :lol:

Link to comment
Share on other sites

Do you mean the 6 o'clock marker? It could be a little off, see if you could get a better piece. 

My unsolicited advice is to be realistic about reps and the QC. Perfection is often desired but hard to achieve. 

I had a watch rejected 3 times because each time they present a watch with the flaw corrected, another different flaw popped up...

In the end, it was a matter of which flaw I could live with more.   :lol:

 

Yes. The 6 o' Clock marker alignment seem off.

Quite obvious if look closely.

Shall reject this piece I guess hahaha.

Close to perfection but cannot be 100% as these are reps 

Hahaha, thanks for the advise  :clap2:

 

Link to comment
Share on other sites

 

 

Try another piece if it bothers you, and see if you can get a better piece. 

Remember however that your pic would be much bigger than the actual dial is, so everything is amplified.

Even in genuine watch dials, I have seen flaws, some of them rather ridiculous. ;)

Link to comment
Share on other sites

Try another piece if it bothers you, and see if you can get a better piece. 

Remember however that your pic would be much bigger than the actual dial is, so everything is amplified.

Even in genuine watch dials, I have seen flaws, some of them rather ridiculous. ;)

 

You shall ask for another piece as it bother me much. Kinda of obvious to me

Thanks for the info on images how it looks like

:huh:  Would definitely reject if for a gen piece as spend that much for a piece haha  :fool:

Link to comment
Share on other sites

Guys something strange four screws on side of case (two each side) three silver /metal color one black on crown side?

 

Pics 2 and 3

 

Hello Mike. Are you referring to this the side screws that is black? Not sure about it, might be due to the angle being taken or shadow causes that. Have emailed toro for another piece due to the 6'o clock markers alignment is off 

 

TEFtg6.jpg

Link to comment
Share on other sites

No replies for 2 days after requesting for a replacement after I have rejected the first piece upon viewing the QC photos
Replies were swift fast when enquiring for payment modes but after payment, there is no reply when asked for replacement

2-3 waiting days should be sufficient for a customer that have already paid for the piece?

Link to comment
Share on other sites

That's normal. Esp over the wkd.

A noob buying a 7750 rarely ends well. I hope you've done your homework on those.

I would have accepted the watch. I think it looks great.

Would have accept the piece if the 6o'clock marker is straighter. Wouldn't 100% perfection but least not that obvious Edited by ArcAngel
Link to comment
Share on other sites

Seconds at 6 O'clock position on the sub-dial does not work well with the A7750, there are some fixes we think /hope will stand the test of time :pray:  but as yours at nine not relevant.

Thanks for the advise :) Learnt something new and gotta read more about the 7750 movement. So much interesting stuff to read and learn about from the posts in the forum..!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up