hgaits Posted December 27, 2014 Report Share Posted December 27, 2014 Hi all, Who would you recommend I buy the Datejust I blue dial from. Who has the most realistic replica (2.5mag, everything looks real), etc. Must be a trusted seller. Link to comment Share on other sites More sharing options...
HaydenM Posted December 27, 2014 Report Share Posted December 27, 2014 Mate, I'll give the advice of everybody. Read. There's a lot of good information here and not many will just hand it to you if you don't try. It's a stupid question for many reasons, such as We don't know the budget (Some people have unrealistic expectations of a $100 rep and other will sink upwards of $1000 on a franken) We don't know whether you want vintage or new We don't know the metal The Datejust is one of the most varied reps (and for that matte gens) in existence. Read up and you might find the answers, if not, try asking a better question or looking at the trusted dealers section and their websites. Link to comment Share on other sites More sharing options...
hgaits Posted December 27, 2014 Author Report Share Posted December 27, 2014 Thanks for the reply, I apologize that I was leaving out some information. I'm looking for one stainless steel $200-$300, new. 37 mm, jubilee bracelet. Blue Dial. Like this one : I want the most realistic replica, preferably from someone who has experience purchasing one of these from someone. I want the cyclops mag to be as close to the original as possible (2.5 mag). Thanks for your time. -H Link to comment Share on other sites More sharing options...
panerai153 Posted December 27, 2014 Report Share Posted December 27, 2014 The best DJ's around are those built by mymanmatt, hands down, however his are pretty far above your budget. I believe that your best bet is to try to find one on the Trusted dealer websites. If you can't find one there, then they are probably not available as a rep. Go to the dealer section, go to their websites and look. 1 Link to comment Share on other sites More sharing options...
HaydenM Posted December 27, 2014 Report Share Posted December 27, 2014 Thanks for the reply, I apologize that I was leaving out some information. I'm looking for one stainless steel $200-$300, new. 37 mm, jubilee bracelet. Blue Dial. I want the most realistic replica, preferably from someone who has experience purchasing one of these from someone. I want the cyclops mag to be as close to the original as possible (2.5 mag). Thanks for your time. -H Hi mate, thanks for the new information and apologies if I came on a bit strong. As for your next step I would advice to look through the TDs here and decide who you want to go with. When you've made your decision go to their site and then to a page like this ( http://www.trusty-watch.com/index.php?main_page=index&cPath=1_12&sort=3a&page=6 ) and look through the list of DJs (apologies but it's a massive list). From there if you find your desired watch, great, if not hopefully you find something else in your search that you like. If neither of those are true then you're in the problematic territory of needing to franken / make custom and your budget does not allow for that currently. Hope this was of some help Link to comment Share on other sites More sharing options...
kbh Posted December 27, 2014 Report Share Posted December 27, 2014 Also, you could just send that picture to a couple of the trusted dealers. I'm sure it's available from any of the dealers. The DJ's are all pretty decent reps but the better quality are almost always the Swiss or ETA clone models with sapphire glass. Link to comment Share on other sites More sharing options...
jmb Posted December 27, 2014 Report Share Posted December 27, 2014 I have built a couple similar to what you are wanting but they are 36mm... Link to comment Share on other sites More sharing options...
HaydenM Posted December 28, 2014 Report Share Posted December 28, 2014 I have built a couple similar to what you are wanting but they are 36mm... I think OP may be wrong with the size of the case as the DJ1s are 36mm Link to comment Share on other sites More sharing options...
If you see Kay Posted December 28, 2014 Report Share Posted December 28, 2014 Some TDs quote them as 37mm Link to comment Share on other sites More sharing options...
HaydenM Posted December 28, 2014 Report Share Posted December 28, 2014 Some TDs quote them as 37mm Yes, but the Gen is 36mm Link to comment Share on other sites More sharing options...
If you see Kay Posted December 28, 2014 Report Share Posted December 28, 2014 Yes of course. I just don't know why the 37mm is stated on the TDs websites Link to comment Share on other sites More sharing options...
hgaits Posted January 2, 2015 Author Report Share Posted January 2, 2015 My apologies, I believe the gen is actually 36 mm, as per the official website; http://www.rolex.com/watches/datejust/m116233-0149.html. Jmb do you have any for sale? I have built a couple similar to what you are wanting but they are 36mm... Link to comment Share on other sites More sharing options...
hgaits Posted February 27, 2015 Author Report Share Posted February 27, 2015 Hi guys, I decided to take another crack at it, How does these seem to you guys, does they seem realistic or immediate giveaways? Please give attention to the mags and see if they look like 2.5 or not. Gallery 1) http://imgur.com/a/IVwkk Gallery 2)http://www.pf-818.com/rdjms01028-jubilee-blue-roman-swiss-28362-p-4067.html Please vote. Link to comment Share on other sites More sharing options...
amespinosa Posted February 27, 2015 Report Share Posted February 27, 2015 (edited) for the best DJ1 just build it yourself or have someone do it for you. it can be a combination of 3 reps (getting the best parts from each) to get 1 desirable watch. the one in the imgur link is pretty decent enough. just get the ETA version for servicability, etc. also don't forget to subject the bracelet into an oil bath to further enhance the feel when wearing it. Edited February 27, 2015 by amespinosa Link to comment Share on other sites More sharing options...
hgaits Posted February 27, 2015 Author Report Share Posted February 27, 2015 I've been told by Josh from Perfect Clones and Andrew from Trusty Watch that the mag on datejust are only 2.0 and therefore the reps are also 2.0. Is this true? Link to comment Share on other sites More sharing options...
alligoat Posted February 27, 2015 Report Share Posted February 27, 2015 Date mag on gen DJs isn't all that great and to be honest Rolex doesn't really care all that much about it anyway- their position is if they're 100% gen rolex parts it's just fine. I don't know about the statements from Josh and Andrew, I think date mag is still supposed to be 2.5- but it's really not that important. But I do like the dial from Andrew better than the one form Josh. Link to comment Share on other sites More sharing options...
dutchguy2 Posted February 27, 2015 Report Share Posted February 27, 2015 Date mag should look someting like this (for a plexi model that is): Link to comment Share on other sites More sharing options...
rillz Posted February 27, 2015 Report Share Posted February 27, 2015 Date mag should look someting like this (for a plexi model that is):Gen or superfranken? Link to comment Share on other sites More sharing options...
dutchguy2 Posted February 27, 2015 Report Share Posted February 27, 2015 Super Franken. Managed to get a SA3135 in this Gen 1603 case. Link to comment Share on other sites More sharing options...
hgaits Posted March 1, 2015 Author Report Share Posted March 1, 2015 Still looking for anyone that knows of someone who has a nice quality rep. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now