whoopy12 Posted April 4, 2015 Author Report Share Posted April 4, 2015 Hey all, So as not to leave you hanging, below I've attached pictures of the first printing. I think I forwarded one of these to a member who preordered already, but wanted to share with everyone as promised. The first printing did not pass my QC because of a couple of issues, the largest being the "E" in 'Superlative' (or rather the 'upside down F'). Not sure how this happened, as the source file I supplied them did not have this defect. With that said, pad printing is always the fun part Will be updating you guys once the batch is reprinted! -Whoop 1 Link to comment Share on other sites More sharing options...
droptopman Posted April 4, 2015 Report Share Posted April 4, 2015 Thanks for the update. That is strange Sent from my droptop using telepathy. Link to comment Share on other sites More sharing options...
whoopy12 Posted April 18, 2015 Author Report Share Posted April 18, 2015 Printing is done!!!! Currently the dials are en route to me. Will be packing each order up once the package arrives Link to comment Share on other sites More sharing options...
droptopman Posted April 18, 2015 Report Share Posted April 18, 2015 Excellent news Sent from my droptop using telepathy. Link to comment Share on other sites More sharing options...
whoopy12 Posted April 25, 2015 Author Report Share Posted April 25, 2015 Hey all, Most of the dials have been shipped For members who haven't gotten my confirmation pm with tracking/receipt info, please contact me asap! Thanks again guys for preordering and bearing with me through the delays -Whoop Link to comment Share on other sites More sharing options...
jmb Posted April 25, 2015 Report Share Posted April 25, 2015 What does the printer do with the boo-boos? Link to comment Share on other sites More sharing options...
whoopy12 Posted April 25, 2015 Author Report Share Posted April 25, 2015 What does the printer do with the boo-boos? Hey J, If by 'boo-boos' you mean misprints, then, he reuses them! I had to get the dial plates custom made (28mm diameter), so the plates were washed and then resprayed with the base coat + reprinted. Link to comment Share on other sites More sharing options...
jmb Posted April 25, 2015 Report Share Posted April 25, 2015 Ah, OK. Link to comment Share on other sites More sharing options...
lhooq Posted May 2, 2015 Report Share Posted May 2, 2015 I got mine! Whoopy! Link to comment Share on other sites More sharing options...
whoopy12 Posted May 2, 2015 Author Report Share Posted May 2, 2015 I got mine! Whoopy! Glad to hear mate! Again, thank you so much for preordering Link to comment Share on other sites More sharing options...
alterego Posted May 2, 2015 Report Share Posted May 2, 2015 Hey all, Ever since the original run sold, I’ve received a bunch of inquires on whether a second batch of 1016 explorer dials would be created. While I didn’t plan on making any more dials, I will be making one last batch of 1016 explorer dials exclusively (sorry, no other models will be made) if the demand is high enough. I would be making 30 total dials, but would need 20 dials accounted for to start printing. The original design has been tweaked so the text/details will be thinner than the original run (which was a bit too thick). The 1016 design that will be printed was hand traced from a genuine dial, and then further edited and refined in a vector program to get optimal printing results once the cliche is made. As before, dials will come unlumed, so you can apply glowing or non-glowing lume. If anyone is interested in a 1016 dial, kindly start a list below and add your username. Once the list/orders are filled, I estimate that the dials will be finished/in transit in 60-90 days. Dials will each be $179. First 5 members to sign up will receive a $10 discount. Previous dial version can be seen below. As mentioned earlier, it will be the same 1016 variant, but with thinner printing http://www.rwgforum.net/topic/171126-my-explorer-1016-build-is-finally-complete/ To clarify, this is not a sales post, just want to gauge interest! Special thanks to bangalter for getting this rolling Update: And the most prestigious gold star for tomhorn Link to comment Share on other sites More sharing options...
alterego Posted May 2, 2015 Report Share Posted May 2, 2015 This is a wonderful dial. Thank you for your generous offer. Please count me in. Best Alter Link to comment Share on other sites More sharing options...
droptopman Posted May 2, 2015 Report Share Posted May 2, 2015 Thanks Whoopy. Beautiful dial Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
whoopy12 Posted May 2, 2015 Author Report Share Posted May 2, 2015 Thanks Whoopy. Beautiful dial Sent from my iPhone using Tapatalk Hey M, Just saw your comment on the comp (was on tapatalk earlier). Noticed some missing print I must've overlooked when packing these up. Shoot me a pm if you want to exchange for another mate -Whoop Link to comment Share on other sites More sharing options...
droptopman Posted May 3, 2015 Report Share Posted May 3, 2015 Oops. Missed that taking the photos. I see it now. Pm sent. Thanks Whoop. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Akira Posted May 3, 2015 Report Share Posted May 3, 2015 I got mine! Whoopy! WTF do you need another 1016 dial for? Link to comment Share on other sites More sharing options...
ww12345 Posted May 4, 2015 Report Share Posted May 4, 2015 Can you have too many? I don't think so.... 1 Link to comment Share on other sites More sharing options...
quaresma7 Posted May 4, 2015 Report Share Posted May 4, 2015 Looks really good Whoop! Great work!! I got mine! Whoopy! Link to comment Share on other sites More sharing options...
lhooq Posted May 4, 2015 Report Share Posted May 4, 2015 WTF do you need another 1016 dial for? I'm making a keychain. 1 Link to comment Share on other sites More sharing options...
rillz Posted May 4, 2015 Report Share Posted May 4, 2015 I'm making a keychain. A pocket watch 1016 would be pretty boss. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now