archibald Posted January 14, 2007 Report Posted January 14, 2007 Hypothetically speaking, if someone did the leg work and arranged for the production of some aftermarket parts for our PAM reps, what would be tops on your list...and how much would you be willing to...er..part with for said parts? My list: 1) Accurate H series guard, flush pin w/ rubber thingy, finished 1:1 inside and out as per gen: $100 2) 005H dial and back, correct "A's" and superluminova on the dial would be a must. I couldn't care less about serial #'s on the back as long as they're not 0002 or the similar unlikely-to-be-owned #'s repmakers are fond of. $125 for the set. 3) Not sure if this one would work: Solid Ti backs w/ "automatic" PAM markings so that we can turn our 036's, 118's, etc into Ti autos by dropping in the movements and dials. $65 bucks for the back. Any others?
Watchmeister Posted January 14, 2007 Report Posted January 14, 2007 Good list. If you are going to bother with the H guard we could consider proper thickness casebacks. I think they increased the thickness on the H and I Base and Marinas. Most importantly, improved date font for Asian 7750's.
shultz Posted January 14, 2007 Report Posted January 14, 2007 Most importantly, improved date font for Asian 7750's. Yep! @ archi: I tried to sent a pm but your box seems to be full?!
HauteHippie Posted January 15, 2007 Report Posted January 15, 2007 Accurate sandwich dials for 111,112,176,177 etc. to go with the H CGs.... Price: I dunno, $50-75 ?
dluddy Posted January 15, 2007 Report Posted January 15, 2007 Correct case back to fit the 090 Power Reserves
Maikel Posted January 15, 2007 Report Posted January 15, 2007 beside the H CG's...I would like to see thicker caseback for the 111 & 177.
PAMman Posted January 15, 2007 Report Posted January 15, 2007 Accurate T SWISS T dials for Marina and base (001 & 002 or 004 & 009 etc).
Chronus Posted January 15, 2007 Report Posted January 15, 2007 T SWISS T dial for PAM036, properly aligned. ($20-30 about right? $50 with it all lumed?) JimmyFu crownguards (for my PAM028,029 and 063) $50 (I think that's how much they were to begin with ?) I may be going off PAMs at the moment Can you believe it ? Hmmm come to think of it, I *did* wear the 036 and 063 last week.
docblackrock Posted January 15, 2007 Report Posted January 15, 2007 tapered bracelets!!!!!! $85 Amen brother. And SS/Ti ones at that!
Watchmeister Posted January 15, 2007 Report Posted January 15, 2007 I had forgotten about the tapered bracelet. They were made at some point albeit with single deployant.
watcher Posted January 15, 2007 Report Posted January 15, 2007 Correct H series crown for me and correct caseback thickness has always been a problem on the reps so a good F and H series wouyld be nice. Price would be ok for me too.
docblackrock Posted January 15, 2007 Report Posted January 15, 2007 I had forgotten about the tapered bracelet. They were made at some point albeit with single deployant. Are you aboslutely sure about that? I've been around a long time here and before and the only 'tapered' Pam bracelet I've seen is one a member modded by delinking and machining the relevant links to 22mm. The earlier single button deployants were still 24/24.
Watchmeister Posted January 15, 2007 Report Posted January 15, 2007 Are you aboslutely sure about that? I've been around a long time here and before and the only 'tapered' Pam bracelet I've seen is one a member modded by delinking and machining the relevant links to 22mm. The earlier single button deployants were still 24/24. I have seen two offered for sale here and at the TRC forum. I tried to buy one a few months ago from mabmojo on TRC. He had pics and listed it for sale. I requested paypal info and after initially hearing back from him affirmatively I never heard back. In fact you inspired me to email him just now to see if he still has it so I can complete the transaction. It is possible they had modded them though since there were only two.
lovepanerai Posted January 15, 2007 Report Posted January 15, 2007 most importantly correct G/H/I-series crown guard - the biggest giveaway in my opinion
morgan Posted January 15, 2007 Report Posted January 15, 2007 Visable dark thick printed datewheel w/ high mag cyclops! I care little how close to gen it is because it would be better than gen? I'd pay maybe $20-$25...
sssurfer Posted February 17, 2007 Report Posted February 17, 2007 Most importantly, improved date font for Asian 7750's. Really And cyclops, crowns, crown guards and levers, affordable AR coated sapphire crystals, correct casebacks... Oh my, I did not realize our reps were so bad.
coltrim Posted February 18, 2007 Report Posted February 18, 2007 Correct crown guard. $50. realistic pam straps, why bother supplying plastic rubbish?
docblackrock Posted February 18, 2007 Report Posted February 18, 2007 I have seen two offered for sale here and at the TRC forum. I tried to buy one a few months ago from mabmojo on TRC. He had pics and listed it for sale. I requested paypal info and after initially hearing back from him affirmatively I never heard back. In fact you inspired me to email him just now to see if he still has it so I can complete the transaction. It is possible they had modded them though since there were only two. Did you get anywhere???
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now