stac Posted July 30, 2007 Report Share Posted July 30, 2007 Hello Gents! Will a MBW 1680 accept a genuine crown tube or will I have to re-tap to make the mod work? Link to comment Share on other sites More sharing options...
freddy333 Posted July 30, 2007 Report Share Posted July 30, 2007 Technically, yes. But the threads on some cases are not clean, so you may need to tap them anyway. I would have a tap on hand just to be safe. Ofrei, Cas-Ker, Cousins, etc., all sell taps for Rolex. Link to comment Share on other sites More sharing options...
RWG Technical Posted July 30, 2007 Report Share Posted July 30, 2007 I have had to run a tap through all cases I have installed a Gen tube on...even if it's just to clean the crap from the old threads. Not doing so, runs the risk of breaking a tube when you install it... RG Link to comment Share on other sites More sharing options...
stac Posted July 30, 2007 Author Report Share Posted July 30, 2007 Thanks guys! Link to comment Share on other sites More sharing options...
Dizzy Posted August 2, 2007 Report Share Posted August 2, 2007 ok.. i have searched and searched some more and the ONLY and cheapest 3mm x .3 tap i can find is on Casker for $35 plus shipping. I can find lots of 3mm x .6 on the net for about $2-3 and thats all they are worth. Can someone guide me in the right direction here? Where can i get a submariner GEn size tube tap for a reasonable price???? can someone post here or PM me a website and part #? Lonnie You will have to run a tapping tool through because all MBW tubes are glued in and thus make the threads dirty... this debris needs to be removed. Tap size is M3 finethreading - 3.0x0.35mm Link to comment Share on other sites More sharing options...
cableguy Posted August 2, 2007 Report Share Posted August 2, 2007 I should have some shortly Link to comment Share on other sites More sharing options...
alligoat Posted August 2, 2007 Report Share Posted August 2, 2007 Specialized watch tools don't come cheaply. Cableguys tap is about the best deal I've seen costwise. I just bit the bullet and went to julesborel- the tap for 24-600 series and 24-7030 tubes (PN- STK300) is $35.00 The new style case tube wrench- PN- STK1060 is also $35.00. It's slightly better than ofrei's where they sell the stuff in pairs for $69 and $49. http://www.ofrei.com/page433.html Link to comment Share on other sites More sharing options...
Dizzy Posted August 2, 2007 Report Share Posted August 2, 2007 I'm gunna order 10 of them. Im just waiting to hear back from them regarding shipping.... thanks for the fast info guys!!! Lonnie Specialized watch tools don't come cheaply. Cableguys tap is about the best deal I've seen costwise. I just bit the bullet and went to julesborel- the tap for 24-600 series and 24-7030 tubes (PN- STK300) is $35.00 The new style case tube wrench- PN- STK1060 is also $35.00. It's slightly better than ofrei's where they sell the stuff in pairs for $69 and $49. http://www.ofrei.com/page433.html Link to comment Share on other sites More sharing options...
jdavis Posted August 4, 2007 Report Share Posted August 4, 2007 Specialized watch tools don't come cheaply. Cableguys tap is about the best deal I've seen costwise. I just bit the bullet and went to julesborel- the tap for 24-600 series and 24-7030 tubes (PN- STK300) is $35.00 The new style case tube wrench- PN- STK1060 is also $35.00. It's slightly better than ofrei's where they sell the stuff in pairs for $69 and $49. http://www.ofrei.com/page433.html I hate to be the barer of bad news but, I also ordered the tap and wrench from Jules Borel on the 17th of July. The items are back ordered so, be prepared to wait a while. Link to comment Share on other sites More sharing options...
freddy333 Posted August 5, 2007 Report Share Posted August 5, 2007 I agree with Repaustria. I would be very wary of those cheap taps. Before I finally broke down and spent the money for the proper taps (from Ofrei), I tried a tap set from Sears (good quality), but they didn't have the correct thread pitch so I had to pitch the case and start over (with the Ofrei taps). Link to comment Share on other sites More sharing options...
Dizzy Posted August 5, 2007 Report Share Posted August 5, 2007 i am a firm believer in "you get what you pay for" but, i have a lot of experience with taps and dies so'll i'll give it a shot (experiment) with the cheapo tap and post my findings. I agree the $40 tap is better but its such a huge difference in price... seems a little inflated maybe just becasue of its size and probable limited uses. Either way i will let you know how it works out Lonnie Link to comment Share on other sites More sharing options...
cableguy Posted August 7, 2007 Report Share Posted August 7, 2007 L-Dizzle - did you order the taps yet? I ordered a few sets of taps, bits for the actual crown tube hole + drill bits for lugs I'll let u guys know how it goes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now