Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

IWC Pilot's Doppel Chronograph Limited (PVD)


Dani

Recommended Posts

It is a obvious mix out of the Doppelchronograph "TOP GUN" 3799 and the 3786 Doppelchronograph.

The only part taken from the TopGun model is the caseback, while the rest looks pretty much like the doppelchrono.

To become a good topgun rep it will need (besides the dimension) an engraving below the ten o' clock pusher with the TopGun-logo,

tpgn2.jpg

differtent second hands (red planes at the end) and titane crown and pushers.

tpgn.jpg

to make a good doppelchrono rep, it will just need the right caseback, titane crown and pushers..

dsc00309fd7.jpg

dsc00313tb9.jpg

But still I like it: as long as you wear it, it will look good. Just don't show of that caseback...

:lol:

Edited by Seadweller4000
Link to comment
Share on other sites

Ok, I know it's a bit of a mish-mash, but I really like it. :good:

Yes, it should be 46/47mm if it's a Top Gun, and have the red planes on the end of the second hands, but in size (and ignoring the caseback), it's pretty close to the 2006 ceramic doppel chrono. If Angus is really selling them, and not just testing the water, then I may well buy one ;)

Link to comment
Share on other sites

In fact, if I was not into fast bavarian cars as my primary hobby, then I'd go out and buy the original doppelchrono right now.

i.e. "If it didn't cost so damn much to keep my Bimmers on the road..." ;):bangin:

Link to comment
Share on other sites

I like it, sucks about the titanium pushers and crown being left out. Caseback....as stated leave it on and who can see it.

I could not really tell from PT's pics but does his have the double seconds hands for the chrono?? Looks like only one to me.

Link to comment
Share on other sites

prob wont have the double seconds...

i would really love to hear how good this pvd actually is. and if a non pvd version is expected. i cant imagine we wont have somre more of these given that the dial is unique to these models (far as i know).

Link to comment
Share on other sites

Hmm, tempting ... but, I think this case is still 42 mm, I doubt they went to trouble of creating new case ? Angus does not specify size ... and 3786 is 44 mm. If this case is 44 mm then this one gets very high on my list :rolleyes:

regards

Link to comment
Share on other sites

Hmm, tempting ... but, I think this case is still 42 mm, I doubt they went to trouble of creating new case ? Angus does not specify size ... and 3786 is 44 mm. If this case is 44 mm then this one gets very high on my list :rolleyes:

regards

it says 42mm same case as the 3717 on angus add.

Link to comment
Share on other sites

It's not so bad... :blush:

Hi Euno.....since we're talking about bimmers (kinda off topic, but what the hay?), do you do you're own maintenance/repair/upgrade (sounds like watches???)? If you

do, how tough is it to replace a '95 740IL front shocks (have 65,000 miles in it)?

Thanks!

Link to comment
Share on other sites

Hi Euno.....since we're talking about bimmers (kinda off topic, but what the hay?), do you do you're own maintenance/repair/upgrade (sounds like watches???)? If you

do, how tough is it to replace a '95 740IL front shocks (have 65,000 miles in it)?

Thanks!

I'll jump in on that (having changed all front end components on a '94 E34 540i, which is basically the same car).

It's not too bad to do yourself. There's plenty of room to fit the spring compressors. Here are some instructions & tips:

http://www.nmia.com/~dgnrg/page_27.htm

While you've got things apart, you may want to consider changing some other wear parts, like the control arm bushings, and sway bar links...

Edited by avitt
Link to comment
Share on other sites

Hi Euno.....since we're talking about bimmers (kinda off topic, but what the hay?), do you do you're own maintenance/repair/upgrade (sounds like watches???)? If you

do, how tough is it to replace a '95 740IL front shocks (have 65,000 miles in it)?

Thanks!

I agree with Avitt...

If you've got the wheels off, you might as well as change the lower & upper control arms, the sway bar links and the tie rods as well. Just make sure to preload the upper & lower arms before fully torqing them down or the bushings will shred (just drop the car's weight down on a jackstand, then torq down tight). You will need an alignment afterwards.

Use this link as a reference for parts: http://www.realoem.com/bmw/select.do

Order parts from www.Autohausaz.com or elsewhere for good pricing.

If you don't want to rebuild the front end, replacing the shocks/struts/springs is fairly easy and straighforward. Just be very careful with the spring compressor. Should take an 1-3 hours to do depending on your tools and skills.

I do most of the work on my E31, but I am lucky to be able to use my friend's shop & tools. If you don't do your own work, by all means find a nice mechanic that will allow you to bring in your own parts purchased from the web. You will save tons of $$$ and you will find it quite easy to maintain and even upgrade your 7-Series.

BTW, you have a lovely car... I miss my old 750.

Cheers :)

my840citheparkjb4.jpg

Link to comment
Share on other sites

I'll jump in on that (having changed all front end components on a '94 E34 540i, which is basically the same car).

It's not too bad to do yourself. There's plenty of room to fit the spring compressors. Here are some instructions & tips:

http://www.nmia.com/~dgnrg/page_27.htm

While you've got things apart, you may want to consider changing some other wear parts, like the control arm bushings, and sway bar links...

I agree with Avitt...

If you've got the wheels off, you might as well as change the lower & upper control arms, the sway bar links and the tie rods as well. Just make sure to preload the upper & lower arms before fully torqing them down or the bushings will shred (just drop the car's weight down on a jackstand, then torq down tight). You will need an alignment afterwards.

Use this link as a reference for parts: http://www.realoem.com/bmw/select.do

Order parts from www.Autohausaz.com or elsewhere for good pricing.

If you don't want to rebuild the front end, replacing the shocks/struts/springs is fairly easy and straighforward. Just be very careful with the spring compressor. Should take an 1-3 hours to do depending on your tools and skills.

I do most of the work on my E31, but I am lucky to be able to use my friend's shop & tools. If you don't do your own work, by all means find a nice mechanic that will allow you to bring in your own parts purchased from the web. You will save tons of $$$ and you will find it quite easy to maintain and even upgrade your 7-Series.

BTW, you have a lovely car... I miss my old 750.

Cheers :)

Thanks a lot, guys!!! That's a big help...I'm planning to do these by myself.....been doing all the maintenance and stuff since I bought this car. I plan to do this in Spring! I have it hibernate in the winter! It's still mostly stock, except for the 19" mags and tires that I did in '98! I'll post some pics once I find them somewhere on this darn PC! Color is Navy Blue!

Link to comment
Share on other sites

  • 2 weeks later...

Any news? Dial/ case/ pushers and crown corrections?

I think that if they put the pushers and crown on tintanium and make a good case this will be a very nice rep. And make a little modification on the dial and on the caseback.

Waiting news, photos!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up