unkindone Posted October 3, 2008 Report Share Posted October 3, 2008 hey guys, where do most of you buys tools (watch screw drivers, pin removers, case removers etc...) from? can you just walk into a jewelery store and buy from them? doubt that... just thought I would ask! Link to comment Share on other sites More sharing options...
DemonSlayer Posted October 3, 2008 Report Share Posted October 3, 2008 the bay Link to comment Share on other sites More sharing options...
Toadtorrent Posted October 3, 2008 Report Share Posted October 3, 2008 hey guys, where do most of you buys tools (watch screw drivers, pin removers, case removers etc...) from? can you just walk into a jewelery store and buy from them? doubt that... Yup. If you've got the right kind of jewellery supply store. In Toronto there is a jewell and watch supply store downtown, as well as H.W. Perrin which is the equivalent of Ofrei or Borel in Canada. For the most part...the Bay or check the RWG Tools Links. Link to comment Share on other sites More sharing options...
unkindone Posted October 3, 2008 Author Report Share Posted October 3, 2008 Yup. If you've got the right kind of jewellery supply store. In Toronto there is a jewell and watch supply store downtown, as well as H.W. Perrin which is the equivalent of Ofrei or Borel in Canada. For the most part...the Bay or check the RWG Tools Links. thanks ..never actually thought of ebay im on the west coast of canada btw...ur in toronto? Link to comment Share on other sites More sharing options...
Toadtorrent Posted October 3, 2008 Report Share Posted October 3, 2008 thanks ..never actually thought of ebay im on the west coast of canada btw...ur in toronto? Yup. You get your reps 2-4 days faster than I do. H.W. Perrin sells the full Bergeon catalogue...just get a part number and call them and they'll ship it out. They do mostly mail order and their parts are fair. Lots of gen Rolex and Omega if you need it. I've also gone here: International Watchman Cheap and decent for non-frequent use. If you have a Rolex...get the gen Bergeon die...much better than the Chinese ones. Here's Perrin's Contact Info: H.W. Perrin Link to comment Share on other sites More sharing options...
fat.tail.event Posted October 3, 2008 Report Share Posted October 3, 2008 www.bostonwatchexchange.com (they are on the bay as well) hey guys, where do most of you buys tools (watch screw drivers, pin removers, case removers etc...) from? can you just walk into a jewelery store and buy from them? doubt that... just thought I would ask! Link to comment Share on other sites More sharing options...
looseends Posted October 4, 2008 Report Share Posted October 4, 2008 On Amazon, I like FindingKing. Link to comment Share on other sites More sharing options...
sssurfer Posted October 4, 2008 Report Share Posted October 4, 2008 cousinsuk too Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 4, 2008 Report Share Posted October 4, 2008 eBay or in the GTA (outside toronto) SOMAL WATCH (google somal watch canada) very nice owner, gave me a great deal as well. had decent sub inserts also. he gave me my tools for the price of the sale that had ended a week ago. prices are comparable to ebay but there is no shipping $ to pay. he sells ETA, ETA clone, asian valjoux, swiss 7750, and bergeon, horotec tools, and no name. also has his own catalogue. i picked up a bag full of treats for under $100 Link to comment Share on other sites More sharing options...
makubex05 Posted October 4, 2008 Report Share Posted October 4, 2008 Got these tools set from the bay: Link to comment Share on other sites More sharing options...
offshore Posted October 4, 2008 Report Share Posted October 4, 2008 And guys, please don't forget, that we have Birdmans tools on our site here, and from time to time Narikaa has some goodies. Offshore Link to comment Share on other sites More sharing options...
browngo1 Posted October 4, 2008 Report Share Posted October 4, 2008 Found this bracelet adjustment toolkit on Watch Obsession. I bought some Cape Cod cloths and some other bits and pieces from them and and I got them next day. They also ship worldwide. http://www.watchobsession.co.uk/shop/suiss...tock-p-241.html Gordon Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 5, 2008 Report Share Posted October 5, 2008 wow watchobsession is expensive....it's the U.S price BUT in POUNDS sterling Link to comment Share on other sites More sharing options...
vlaletom Posted October 5, 2008 Report Share Posted October 5, 2008 If you are just planning to do bracelet pin adjustement, and open a case or two, to inspect that the movement you recived is as announced you can basically buy from anywhere online. But if you are planning to do more serious stuff i would sugest you invest into Time zone toolkit 1&2. You will have most usefull tools, and actually doing the course plan is a must if you whant to teech yourself somme basis .. I did and really don't regret it. Of course if you get caught by the watchmaking bug (or should i say watch destroying ) , you can latter invest in the more expensive tools, like an ultrasonic cleaner... just my 2c ... Link to comment Share on other sites More sharing options...
unkindone Posted October 5, 2008 Author Report Share Posted October 5, 2008 thanks to everyone! hopefully this post helped more then just me! shall ask a few AD's here first..never really thought that they might sell any tools though, worth a try I suppose! may I make an assumption that bergeon are the top of the line? Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 6, 2008 Report Share Posted October 6, 2008 (edited) i dont think an AD will stock you. i've tried before. bergeon, horotec seem to be the best in terms of durability and delivered quality. asian stuff sometimes isnt cut to spec or the screwdrivers break /warp/dont come sharp/ or wear out to easily. i use asian screwdrivers tho cause of the cheap price and in terms of value i think are worth it. tools in my kit so far: START WITH THESE: jaxa wrench LG openall link pin remover (or use paperclip) spring bar remover dust blower 9pcs screwdriver set silicone grease MORE ADVANCED KIT for fixing most things (in order of most used personally): loupe 3x 5x 10x finger cotts dust cover #5 tweezer plastic tweezers victorinox swiss knife soft work pad, (just a recycled old mouse pad that was really soft) case vise movement holder presto hand remover hand press crystal press file set 400, 800, 1200 grit sandpaper divided storage tray mini protractor triangle watch makers hammer ultrasonic cleaner demagnitizer crown stem cutter needle nose pliers pin vise mini anvil digital calipers CHEMICALS for the advanced kit: Rodico OR rub off (which leaves less grease in my opinion.) metal polish (green or white) acetone mobious oils lighter fluid OR parts cleaner hypo cement UV glue this complete kit is VERY WELL rounded and can acomplish most tasks. most likely this is all you'll need Edited October 6, 2008 by highoeyazmuhudee Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 6, 2008 Report Share Posted October 6, 2008 ALMOST forgot: pegwood or toothpicks lint free watch paper OR wax paper, post its needle eye right angle tweezers dial protector sheets OR cut wax paper to size using the bergeon model ALSO; DONT use iron drivers or pliers, ONLY ANTI MAGNETIC or plastic. Link to comment Share on other sites More sharing options...
milsub5517 Posted November 12, 2008 Report Share Posted November 12, 2008 guys, can you recommend not expensive tool set that has movement holder for ETA, hands remover, anything else i need to put together my first rolli frankenstein? lol eBay has a few sets for cheap but im afraid it could be a waste of $. are there any decent tool sets for under 100$ ? i like working with my hands so i have a feeling i may enjoy this project. i already have a set of small decent screw drivers (moody tools) Link to comment Share on other sites More sharing options...
borzol Posted November 13, 2008 Report Share Posted November 13, 2008 I recommend them. Good quality and price from Germany. http://www.watch-tool.de/ Link to comment Share on other sites More sharing options...
offshore Posted November 13, 2008 Report Share Posted November 13, 2008 guys, can you recommend not expensive tool set that has movement holder for ETA, hands remover, anything else i need to put together my first rolli frankenstein? lol eBay has a few sets for cheap but im afraid it could be a waste of $. are there any decent tool sets for under 100$ ? i like working with my hands so i have a feeling i may enjoy this project. i already have a set of small decent screw drivers (moody tools) @mil-sub, That kit you picture, is probably not bad value for money, although it lacks some essentials. The driver kit looks like one of the French ones, and with new blades, they are most useable. The rest of the gear, basically will be used at varying times, so for the price, it is not unreasonable. When I started, some years back, I bought one of the cheap ebay kits. We all know they are basically cheaper quality, however I have to tell you, that I still use quite some of the components today. The springbar tool I got with mine, had crap end pieces, so I replaced them for a few $$, and I still use it. The pin pusher (blue) also has needed replacement pins, but is still used regularly. The hammer is quite acceptable, the case back knife has now seen better days, but still does the job, (sharpened many times), the band/bracelet locator block still does the job, and the pin pushers have been OK.(although the tips are soft) The caseback tool is a piece of s**t, as are the drivers, the tweezers gave up a long while back, and the pliers are still around, although I have a better set, which I use more frequently. But Hey....these kits cost typically $10- $20, including postage. You will go a long way to find better value, and even if some or most of the tools finally get binned, they are a good starting point in this hobby. And whilst you may make a few messes, by using crap tools, at least you have some to start with! Better than nothing. And it does become a point to start and learn, not only about the watches you wish to work on, but also about your own needs in the quality of tools, you require. Can feel the Zigmeister, frowning over my shoulder as I type so will close with those immortal words. " A poor craftsman blames his tools" Offshore Link to comment Share on other sites More sharing options...
auswoods Posted November 13, 2008 Report Share Posted November 13, 2008 Got mine from Josh dont bother with them if you want real quality Link to comment Share on other sites More sharing options...
milsub5517 Posted November 13, 2008 Report Share Posted November 13, 2008 more info plz? does Josh sell a tool kit? how much? whats included?? thanks. Got mine from Josh dont bother with them if you want real quality Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now