mrbrown1 Posted April 14, 2009 Report Share Posted April 14, 2009 Whoever said modding the plate was easy, well, it's not. The following took bloody 4 hours for the first attempt, and the positions are slightly off. But doesn't look too bad at this point. Things to do: - Hand polish the extra holes I've cut. They're quite rough - Fix some of the positioning - Find better fitting screws - Brushing the plate into a satin finish; then plating it with white gold. Forget about the Geneve wave decorations, it's impossible without the right tools. In the photo, I've simply polished the original swirl plate to a mirror shine. Link to comment Share on other sites More sharing options...
arminvanbuuren Posted April 14, 2009 Report Share Posted April 14, 2009 that looks good enough.. just need the cotes de geneves.. but u did well tho.. Link to comment Share on other sites More sharing options...
StormTooper4 Posted April 14, 2009 Report Share Posted April 14, 2009 Most Excellent work Link to comment Share on other sites More sharing options...
rogerthat Posted April 14, 2009 Report Share Posted April 14, 2009 Impressive start! Link to comment Share on other sites More sharing options...
coolfire Posted April 14, 2009 Report Share Posted April 14, 2009 Hey, that's impressive! Link to comment Share on other sites More sharing options...
Dani Posted April 14, 2009 Report Share Posted April 14, 2009 Great work bro Try get those cotes de geneves that would be the cherry on this one .. Cheers., Dani Link to comment Share on other sites More sharing options...
Samurai Posted April 14, 2009 Report Share Posted April 14, 2009 An excellent attempt bro. Looks really good. Anyday much better than the stock bare plate. Am sure you'll get it right in another couple of attempts. Let me know if you would be willing to offer this as a service here. Well done. Link to comment Share on other sites More sharing options...
Toadtorrent Posted April 14, 2009 Report Share Posted April 14, 2009 That looks great. Way to kick in a great introduction to the forum!! Link to comment Share on other sites More sharing options...
veyron Posted April 14, 2009 Report Share Posted April 14, 2009 Wow, with cotes the geneve this is perfect. How to get coted the geneve decoration? Do you need a machine for it? If you finish this mod are you thinking of offering this on the forum as a mod? Link to comment Share on other sites More sharing options...
rckh Posted April 14, 2009 Report Share Posted April 14, 2009 Woo......You are GREAT man! Best Regards, raymond Link to comment Share on other sites More sharing options...
Guest nikos1978 Posted April 14, 2009 Report Share Posted April 14, 2009 very well i think can you offer these modd to the other members? Link to comment Share on other sites More sharing options...
nikki6 Posted April 14, 2009 Report Share Posted April 14, 2009 Top job MrB, most impressive!! Welcome to the boards, this is one of the more interesting intro's for sure!! lol You have done great work man, think you would have a good line of customers wanting this done if you offer it out to the board!! Again congrats on some great handy work!! Sixx Link to comment Share on other sites More sharing options...
Guest nikos1978 Posted April 14, 2009 Report Share Posted April 14, 2009 do you spay the subdials or not? because in the photo i see it not too shiny Link to comment Share on other sites More sharing options...
Shundi Posted April 14, 2009 Report Share Posted April 14, 2009 Very nice work! Link to comment Share on other sites More sharing options...
specialvat Posted April 14, 2009 Report Share Posted April 14, 2009 Looking great, maybe using metallic paint and alternating brush directions you could get a geneva stripe effect ? Link to comment Share on other sites More sharing options...
ecsm Posted April 14, 2009 Report Share Posted April 14, 2009 Wow, looks great! Good work!! Link to comment Share on other sites More sharing options...
ThinkBachs Posted April 14, 2009 Report Share Posted April 14, 2009 I'm waiting for V5... Do you have before shots? And is this what you're trying to achieve? Looks pretty good to me from where I'm sitting... Link to comment Share on other sites More sharing options...
Guest nikos1978 Posted April 15, 2009 Report Share Posted April 15, 2009 any update? Link to comment Share on other sites More sharing options...
mrbrown1 Posted April 16, 2009 Author Report Share Posted April 16, 2009 Currently looking into doing the CotesDeGeneve engraving Link to comment Share on other sites More sharing options...
Guest nikos1978 Posted April 16, 2009 Report Share Posted April 16, 2009 how you will do thesE? Currently looking into doing the CotesDeGeneve engraving Link to comment Share on other sites More sharing options...
Toadtorrent Posted April 16, 2009 Report Share Posted April 16, 2009 FxrAndy was working on this: Perlage Machine Link to comment Share on other sites More sharing options...
Jakob Posted May 2, 2009 Report Share Posted May 2, 2009 Good job. Can you do one for me ;-) Link to comment Share on other sites More sharing options...
Guest nikos1978 Posted May 3, 2009 Report Share Posted May 3, 2009 any updates????? Link to comment Share on other sites More sharing options...
ricardo Posted May 30, 2009 Report Share Posted May 30, 2009 any updates????? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now