Leaderboard

Elephant [emoji208] Sent from my iPhone using Tapatalk Pro

Pvirus dial?

PAM 332 on Kevlar Sent from my SM-N920P using Tapatalk

Odd. Several years ago, I posted a thread comparing my disassembled gen 6239 pushers (removed from a sealed Rolex package) to Ofrei's (PD61.701) &, after sizing for my case, I could not tell the difference between them. You do know that the pusher stems must be cut & slotted (for a screwdriver blade) to fit your case? If you have the original pusher, simply measure & cut the Ofrei to match it. If you do not have the original, install the pusher into the case & test fit the movement. Cut its length so that the movement clears during casing, but has sufficient length to operate the chrono when assembled.

Sent from my iPhone using Tapatalk

Up close and personal with a space cadet [emoji41]

Sent from my iPhone using Tapatalk

this is likely because your movement tabs aren't securing your movement tightly and properly. i assume this is for a franken datejust build? If so, then modifying the correct movement tab is the only way to go (i.e. take a longer tab and cut it to the right length and/or bend the tab so that the tab can secure the movement on both ends). I had this problem too when i built my first datejust franken using a 2836-2 case and 2836-2 movement

Call it the Alaskan Backwoods Delicate Adjustment Tweak: Squeeze the movement ring to make it slightly oblong in the axis where the stem penetrates the case.