marrickvilleboy

wowowow.... back up..... very impressive!

service = $350-$400 USD Parts = $240 Bracelet = Aftermarket $50/ Genuine $250 = $540-$890USD + Price of the watch itself. You sure you're interested?

yeah roughly. Involve putting an ETA 6498 into the rep case. Redialing the dial and drilling a new hole for the subsecond dial. Polishing of the backcase and tightening or loosening of the hands to fit the 6498. Even then it will look nothing as nice as the genuine.

yeah apparently the lume on it isn't very impressive, the markers are not raised like the genuine. I've liked the XXL railmaster, i think its one hell of a watch but at 49mm i think its a tad too big for my wrist. Plus there is no good reps of it, I was thinking of making my own, but it will cost me around 200USD and I dont think it'll look that good...

guess i'm wrong...sorry mate, looks like there is a genuine of it with seamaster on the dial. Nice looking watch!

yeah the railmaster should say "railmaster" on it. The picture that you have provided is from Joshua, so if you look at the model below that one; with the leather strap, then that would be the correct model. It also has the see-through caseback, i held it at an authorised dealer and its very nice. EDIT: sorry, realised i didnt answer the question for you. No, i dont think its an original design as the ATs had bar markers and railmasters have the "12, 9, 6, 3" numerals on the dial.

Ebay Link i think private listings are just plain dodgy, you know they just dont want us to inform the buyers plus i reckon they dummy bid and no one will be able to tell. bastards....

Well i've tried it and its worked fine, so has i think The Zigmeister. Your other option is use paint for cars, i'm sure its gotta a better adhesive bond in relation to metals compared to model paint. But as you know, its all about trying, if it doesnt sit well, just turps to wipe it off, then you're back to square one. I've done this to original tag watches which the black bezel numerals have faded. Its worked perfectly, give it a go and let us know how it went. Good luck

LOL! allow me to quote you and you doing alot of research? well if you did, you would know how to remove a crown cos there are alot of topics that cover basic removal of movements from case. and if you actually looked at dealers websites and listings you can see that they are the exact same model from the same factory. So if i were you, i'll read alot more. And for your information, i dont make new users uncomfortable, i just don't like new users who don't use the search function, by the way, i think dablackrock already hinted it to you, but you didn't pick up, but let me give you a polite reminder to please use the search function.

dude..i think its time for you to do your own research, at least put some effort into attempting to do some research, you've pretty much posted a new thread for each and everyone of the questions that have popped into you head..

The best way i've heard is just use model paint, you know...the paint that is used to paint model tanks/planes/etc. The best way to do it is since the engraving on the bezel is indented, you just brush the paint roughly over the bezel, no need to be precise at all, making sure you cover all the numbers and letters. Let the paint settle a little bit, but dont let it dry totally, then use a cloth with turps and wipe off the excess paint on the bezel. Result: the paint in the engravement are still there but the mess that you've made around it will be cleaned up. Good as new! hope this helps.

yes, the hour hand is adjustable, so the hand stacks are correct compared to the original. But apparently everything else was botched; bad font on the writings, bad crown, etc. However, you have to take into consideration that with the 2836 being modded to accommodate the GMT hand, you are running into the risk of having them break down alot easier, and no everyone will be willing fix them (I certainely won't) as they are not true GMTs and the chances of them breaking again is just as likely, so no watchsmith will be willing to guarantee their work. And one last thing, the hour hand doesnt work like the genuine, the genuine omegas and rolex moves in 1 hour increments, while this one doesn't. hope this helps.

Originally from Paul. But alot of work has been done to mine. See link. Omega GMT white dial

@ krustyband, i'm sure a couple of hundred dollars wont hurt the budget if you can buy a Merc for the missus! come on! you know you want this watch! do you know whether this model is even still accessible from our dealers?

I thought i might just take a few pictures of my watches with different bands, so in case some of you guys want to change it around, you will have a rough idea what they would look like. I shouldn't have used a black background though, sorry. SMP bond with nato band Speedmaster automatic with black leather band SMP black with black leather band with white stitching with deployment clasp SM-GMT white dial with brown leather band what do you guys think?

well this project was quite expensive, should have just bought a good 2nd hand Omega speedmaster auto from ebay! The movement was damaged when i got it so it wasn't so much of a bargain, i saw the same movement working that went for $150USD! i've been getting omega parts so much cheaper from my source so i couldn't help myself but build this myself.

Update! Watch restored! heres a dirty wristshot, will update properly in a day or two! thanks.

Update! he just replied back that there is AR coating and that he made a mistake and got it mixed up with the bigger version. Phew!

[censored] Randy.... its happening all over again.....!!

shirting tugging is taught at a very young age, its considered standard play now, although FIFA have tried to crack down on it, but these little glitches in the game are too often overseen. But everyone does it...

hahaha actually Fendushi dropped by my place tonight for me to fix up his watches. I actually live in strathfield now, but very keen to meet some of you guys!

please dont do anymore mods on your watch until you read all of the repair and upgrade section's notes. You will learn how to remove the crown and stem, dial and hands. Please do it! for your sake.

this may be too late, but you're suppose to take the movement out of the watch when you do mods on the case. DOH!

i would love to meet up, but i've fractured my ankle and on crutches. My place it is then!