Tribal

Can u please measure the Endlink diameter? Overall finish and shape look good to me. How about the price? Same as on V2?

Welcome back Oldtimer

Wilkommen

So the pin don't go to the inside of the case. There is nothing to seal. Shure I can do a tutorial but its so easy to do. Take a hammer and small brass pin that have the same diameter as the "Valve" Than put the brass pin on it and pull it with the hammer a bit in the Case that's it. Very easy to do.

No the pin goes not inside the Case. I think it's only half of the case thickness. Thats not a functional Valve.

Nice this comes back. I've reviewed it years a go as it was new and not called Noob Sub.

No

it's not in Freddy's tutorial. If u look on my 1665 in my signature u can see that I pulled the "Valve Pin" a bit in the Case. You can take a small pin from brass and a hammer to pull the pin a bit deaper in the Case. There is not much force needed. This is why I called it " The easy HE Valve Mod" I've done it on several 1665 I modded for some members.

I have modded several MBW 1665. U are right the HE Valve looks etched. But it is a metal pin in the Case. U can drop it in with Hammer. The easy HE Valve Mod Look at mine 1665.

If u mean the MBW 1665 it is not stamped! It's a metal pin in the case.

Thats what I meant. The Bezel is slightly smaller like on SD. That's the reason why u can put a 14060 Insert on a SD Bezel.

Really nice

For the understanding Case size is similar to 16610, but it use a smaller crystal (same size than SD) also smaller Dial (also same size as SD ) The insert is also smaller and can be used on SD too.

The 14060 has no SEL!!!!

The Rehaut is a gen feature!! But this looks not like gen to me

So the mystery is solved. I think it's not worth, too much worth than good things. The one piece Rehaut is nice but I don't believe a gen crystal will fit. Dial seems to be nice.The rest looks crappy to me.

Yepp, different Case, also the diameter of the crystal and also Dial is smaller than on 16610.

Crown position will be the same.

Simply yes.

Looks the same like WM9 construction with the Eta 2876! This was installed in my V2. There are holes in the holder to hold the Eta Dial in place. You must notice that the Hands have different size to fit on the 2876. I reviewed it in the past.

I've done it simply with rounded knife and some force. No damage on the Bezel. But I've messed up some up in the past.

Shure all edges must be sharp

A gen Insert is the best solution there is no other way. It's worth every penny, much better quality and more durable than the best Rep Insert.

I agree with Chefcook the middle link of the SEL must have sharp edges not rounded. Yes the one piece construction is a step forward for shure. Shape looks good and also the fitting is nice. Thanks for your effort on this again.

Nice, now it's time for a proper SD Case