
glennmichael
Member-
Posts
125 -
Joined
-
Last visited
Everything posted by glennmichael
-
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
bump -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
Hmmmm... why didnt I thought of that ??? Probably I was all over my newly bought dremel tool and forgot the basics... I've ran out of spare link ... yikes! -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
I tried out a piece of old SEL onto my Sean's case... this particular out of nowhere SEL is slightly wider between the lugs so it gives me an opportunity to try out the"trimming' process ...- in pursue to the perfect Gen - like SEL . .I use a Dremel 300 to do the job ... It took me 5 mins into the process before I realized It was too hard to get the 2 sides of SEL trimmed , especially we are talking about a clean-cutting-straight-down line that supposed to flush nicely parallel to the inner lug vertical.line.... The dremel easily results in uneven surfaces, that I declared a failure to this exploration after the width was over - trimmed in short - we may ruin the SEL easily if we trim it using our own hands... I hope that we can discuss and resolve this together -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
update please -
after 2.5year since last post... all Gen inserts on franken GMT 16700 using BK's 16570 Xplorer, Gen Dial , jubilee
-
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
+1 -
Is that an April Fool joke ?
-
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
Anxious ... -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
+1 -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
bumped for the success -
Is a 16800 bezel ring the same as 16610(with pictures)
glennmichael replied to the_rymeister's topic in The Rolex Area
I bought a Gen 16800 bezel ring but later decide not to use it because 1. Teeth are not as sharp and defined ( after it was polished and repolished) 2. Bezel bay was slightly wider and I'll need to glue a Gen insert in , if not it'll be so loose that I can literately 'pour' the insert out. 3. After polished , the 'lip' of bezel became very thin and it's not to my liking . Above was just my experience and it should. It be taken as reference on all 16800 bezel rings in the market .. Cheers Glenn -
Looks good ... I want to buy (~_~)||
-
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
Thanks for the update , hope that everything works out fine -
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
Pardon me but any update ? -
Thank you Akira
-
Hi Akira, I've got not much of a technical skill to do it myself
-
Okay BJ, I'll wait for the 15th:)
-
Dear all, I need some advise on the Gen parts that suits which Josh's base case better. I am contemplating between Josh 1:1 1675 and 1655 explorer Reason to choose Josh 1:1 1675 1.) No need to worry about purchasing new hands set and fitment 2.) Better movement i suppose? 3.) Lug accepts my Gen Jubilee 62510H with 550 EL better compared to 1655 case (i suppose?) 4.) Accept Gen 16750 dial better compared to Explorer case? ( anyone can advise?) Reasons to choose 1655 1.) Cheaper base cost 2.) Better CG than 1:1? 3.) accept Gen tube and crown better? PLease advise and I would greatly appreciate if you could correct me if I'm wrong. Many thanks! Glenn
-
Hi Stilty, Good day to you. I am planning to purchase a Sean's 3135 case but would like to install an Eta movement into it. May I ask from you if you have any movement ring that can fit any of eta movement for this case? I will be interested to get 1 piece from you. . Many thanks in advanced and hope to hear from you soon. Glenn
-
Can Sean's bezel assembly fit into bk 'sTW case without any mod ? Anyone can test that out ? Many thanks !
-
Sorry that was supposed to be a PM reply but I posted wrongly on the main page..
-
Hi , Not looking at trade now , need the cash for Gen finding. Anyway this TT is brand new from BK 2 months back ( received before Christmas and worn about 10 times since ) LNIB condition . My selling price will be same as my cost price @$1250+$25 FedEx express from Singapore TT from BK -$830 NOS Gen insert - 220 Gen crown - 200 Total - $1250 nett by PayPal Let me know if interested
-
The perfect Solid End Link - Let's do it!
glennmichael replied to chefcook's topic in The Rolex Area
Any news ? -
I just finished reading the 38 pages of this thread ... I finally got it