Alan72

Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

The top one is hr reworked by@rolojack and the bottom one is silix Sent from my SM-G928F using Tapatalk New case for the silix, it's still a silix case but with metal welded on the lugs by@dlf and reshaped by@rolojack Sent from my SM-G928F using Tapatalk

Ok so this is my first attempt at a 5513 build, the dial is from hr but I think I could have done better with the lume colour, added a Clarks t19 drilled lugs etc. My next one will be better Sent from my SM-G928F using Tapatalk

Athaya crown added to the HR case and a wso fat spring bars jubilee with raffles clasp Sent from my SM-G928F using Tapatalk

Just got this one, this week I will fit a new dial and drill the lugs Sent from my SM-G928F using Tapatalk

For my latest build I used an hws 308. It's bigger and has a lip round the outside edge. I applied a thin coat of hypo cement to the outside edge of the lip (very thin) and let it dry over night, this acts as a gasket. Then compress the crystal with a crystal lift in till you can fit it in the opening and once you release the pressure from the clamp it's a pretty decent seal and no messy glue to clean up and a bit more water resistant too Sent from my SM-G928F using Tapatalk

No branded stuff but the inserts are cheap and the big ball hands are nice. Just don't flame them [emoji23] Sent from my SM-G928F using Tapatalk

The yuki and wso are expensive. I just buy tiger concept ones for about $15 each Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Some better pics , loving this one. Sent from my SM-G928F using Tapatalk

You just take the bezel insert out then you can see a gap round the inner edge of the bezel, use a thin screwdriver and pull out the wire inside and then the bezel just comes off, The crystal on the silix case is glued in and can take a fair amount of force to get out and will probably break. Glue needs to be removed , soak in acetone and carefully scrape it out To put the bezel back on just sir it on the case and push the retaining wire back in Sent from my SM-G928F using Tapatalk

Thanks, it's turned out pretty nice, also pleased that I managed to get it all together without having to glue anything Sent from my SM-G928F using Tapatalk

This is my latest edition to my collection, It started life as a humble silix case and had extra metal welded on to the lugs by@dlf It was then 're shaped and polished by@rolojack and an athaya crown and tube. The dial is a custom one from hr and a Swiss 2836 movement . Thanks to rolojack and dlf for making my latest build possible Sent from my SM-G928F using Tapatalk Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Athaya pearls are good at $10 a piece, they need a bit of trimming sometimes but Look good once they're done Sent from my SM-G928F using Tapatalk

These are my big crowns, one is a silix base, the other an hr. Both have eta 2836 and dials from hr. Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Still loving the hr, changed the dial for a custom one by hr and an eta movement, rolojack did a great job on this watch Sent from my SM-G928F using Tapatalk

Sent from my SM-G928F using Tapatalk

Looks brilliant mate Sent from my SM-G928F using Tapatalk

Oh wow, I need one of those !! Sent from my SM-G928F using Tapatalk