FxrAndy Posted March 11, 2010 Report Share Posted March 11, 2010 Just trying to confirm the fine points for a project i am planning for my birth year watch. 1970 1680 silver date wheel with flat top 3s and open 6 and 9s red sub dial (were any white subs issued for 1970) but a white dial would be correct for a service replacement?? 93150 bracelet with folded links or solid? 580 end links Flat topped plexy with out the champher on the top edge non hacking non quick set date 21600 bph movement 2 position crown date wheel rotation opposite to 28xx movements correct movement cal1545??? where have a gone wrong here guys any details i have missed? Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 11, 2010 Author Report Share Posted March 11, 2010 3000000 serial number and 1570 movement not 1545 like i said above Quote Link to comment Share on other sites More sharing options...
deltatahoe Posted March 11, 2010 Report Share Posted March 11, 2010 based on recent discussions (click here), we have concluded that original red subs from that era actually came with beveled crystals (not top hat crystals). good luck with your project deltatahoe Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 11, 2010 Author Report Share Posted March 11, 2010 Thanks i had missed that one. Quote Link to comment Share on other sites More sharing options...
Gorilladame Posted March 11, 2010 Report Share Posted March 11, 2010 Actually it is even a 1575 (1570 is the 1575 without a date) Also I think it is a 9315 bracelet, folded (here on a 1977 1680 : http://www.rolexforums.com/showthread.php?p=995993)... Quote Link to comment Share on other sites More sharing options...
freddy333 Posted March 12, 2010 Report Share Posted March 12, 2010 1970 1680 Crystal - 127 7mm Crown - 24-700 (Rolex currently fits 24-703 or 24-704 during service) Movement - 1575 Bracelet/end link combos - 9315/280 or 9315/380 (Rolex currently fits 93150/580) Quote Link to comment Share on other sites More sharing options...
Nanuq Posted March 12, 2010 Report Share Posted March 12, 2010 I believe for 1970 yours should be non-quickset movement. There was a break right around 1970/71 -ish where it changed. Quote Link to comment Share on other sites More sharing options...
stilty Posted March 12, 2010 Report Share Posted March 12, 2010 1570 vs 1575 is a bit of a moot point. Even 1655 and 1675 have 1570 marked movements, and they are GMT models. And even the 1016 can have a 1570. I have a 1570 in my 1680, originally from a date model 1601. oh yes, they will all be non-quickset. the quick set date feature wasn't introduced until the 3035. Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 12, 2010 Author Report Share Posted March 12, 2010 Thanks Guys, I am leaning towards a white dial as i like it more, it could still be authentic as service replacement. I think the hardest bit will be a silver date wheel for a 2486 untill or if a 1570 ever turns up. Quote Link to comment Share on other sites More sharing options...
Tribal Posted March 12, 2010 Report Share Posted March 12, 2010 You can also take a AS 1573 movement there the daterotation is correct for a gen silver Datewheel ! Beat is also correct. But hard to find but way cheaper Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 13, 2010 Author Report Share Posted March 13, 2010 Thanks Tribal i may just look for one if this was to be a 1970 but had been serviced then a white dial is possible with a 703 crown and a 93150 bracelet and 580 endlinks (going this route as i prefer the parts and the look and they will be easier to get) also i want white not yellow markers and hands. Has any one got a puretime 1665 and changed the movement and date wheel??? I want your old date wheel Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 13, 2010 Author Report Share Posted March 13, 2010 What i am aiming for, if i can engrave a low 3mill serial number than it would be 1970 with a non hacking movement, a white service replacement dial sill some lume Quote Link to comment Share on other sites More sharing options...
omgiv Posted March 13, 2010 Report Share Posted March 13, 2010 Hi Tribal, The site I looked up says that an AS 1573 is a 13" hand wind movement without date. Is there possibly a different number? Thanks!!! Quote Link to comment Share on other sites More sharing options...
stilty Posted March 14, 2010 Report Share Posted March 14, 2010 What i am aiming for, if i can engrave a low 3mill serial number than it would be 1970 with a non hacking movement, a white service replacement dial sill some lume Like the one I built! Stilty's 1680 Mine is a custom case with a 1972 serial. I used the serial from the donor 1601 case. If you are looking for a service dial, I would use it with a gen movement. They are expensive and I don't recommend cutting off the feet to fit on an ETA. Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 14, 2010 Author Report Share Posted March 14, 2010 Yep silty that is the one just like that, but i think i will be using a 2846 and MBW dial for a while until i can find A the cash B a gen movement C a gen dial I think i will relume the MBW dial and hands with white tritec SL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.