nomad89 Posted November 28, 2010 Report Share Posted November 28, 2010 Its been 2 months now and after 5 different types of clips, none seem to work with the DW 7032 case that I got. Please show me the type of clips that you used to hold your movement in place. Link to comment Share on other sites More sharing options...
Dizzy Posted November 28, 2010 Report Share Posted November 28, 2010 Is the DW case made to accept the gen Valjoux 7734 movement or generic replica movement like an ETA 2836-2 or 7750? What movement are you using? What type of clips are you using? Are they too long? too short? Too big? too small? Need a little more info to help you out Link to comment Share on other sites More sharing options...
burnz Posted November 28, 2010 Report Share Posted November 28, 2010 try asking Spinmaster.. he has assembled quite a few DW7032 using the valjoux7734 movements so far, including mine.. so i'm sure he would be able to point you in the right direction Link to comment Share on other sites More sharing options...
coolfire Posted November 28, 2010 Report Share Posted November 28, 2010 try asking Spinmaster.. he has assembled quite a few DW7032 using the valjoux7734 movements so far, including mine.. so i'm sure he would be able to point you in the right direction +1 on that. Link to comment Share on other sites More sharing options...
nomad89 Posted November 28, 2010 Author Report Share Posted November 28, 2010 Is the DW case made to accept the gen Valjoux 7734 movement or generic replica movement like an ETA 2836-2 or 7750? What movement are you using? What type of clips are you using? Are they too long? too short? Too big? too small? Need a little more info to help you out The DW case is meant for a gen 7734, which is what I have (complete with 45min totalizer). The problem I'm having is that the movement sits too low inside the case which makes the groove on the case for the clips too low. No matter what clips I use, there is never enough pressure exerted on the movement to hold it in place. I think my case may have a manufacturers flaw. Link to comment Share on other sites More sharing options...
Justasgood Posted November 28, 2010 Report Share Posted November 28, 2010 I had to stack 2 clips. I ordered the .50 clamps but they are on back order. I combined what I had to get the right pressure. Link to comment Share on other sites More sharing options...
nomad89 Posted November 28, 2010 Author Report Share Posted November 28, 2010 Where did you order the 0.50 clamps? Link to comment Share on other sites More sharing options...
Justasgood Posted November 28, 2010 Report Share Posted November 28, 2010 Where did you order the 0.50 clamps? Jules Borel. I ordered .30, .40 and .50. Link to comment Share on other sites More sharing options...
nomad89 Posted November 28, 2010 Author Report Share Posted November 28, 2010 Jules Borel. I ordered .30, .40 and .50. Do you have a link for the actual clip? Link to comment Share on other sites More sharing options...
Justasgood Posted November 28, 2010 Report Share Posted November 28, 2010 Do you have a link for the actual clip? http://www.julesborel.com/loginsuccessa.htm Click on Watch material parts Click on Valjoux VAL 7732 VAL 7733 2 PUSHER-CHRONO-30 & 45 MIN. REG. VAL 7734 2 PUSHER-CHRONO-30 & 45 MIN.-REG-CALD Click on Valjoux 7734 Find these CASE CLAMP 166/VAL 7730 4.50 2.10 Add to Order CASE CLAMP, THICKNESS .40 166/1/VAL 7730 6.80 3.80 Add to Order CASE CLAMP, THICKNESS .50 166/2/VAL 7730 5.80 3.00 Add to Order www.julesborel.com Link to comment Share on other sites More sharing options...
nomad89 Posted November 28, 2010 Author Report Share Posted November 28, 2010 Thanks, justasgood! Link to comment Share on other sites More sharing options...
automatico Posted November 28, 2010 Report Share Posted November 28, 2010 I make special movement clamps ('clips') out of feeler gauges... 1...Buy a set of cheapo valve adjustment feeler gauges. 2...Find the thickness you need. 3...Drill the hole for the screw first. 4...Cut the clamp to size around the hole with a cutoff wheel in a Dremel tool. 5...Smooth the edges, bend the clamps if needed. 6...Install them. Link to comment Share on other sites More sharing options...
nomad89 Posted November 28, 2010 Author Report Share Posted November 28, 2010 I got the movement to stay in place by stacking clips, as Justasgood suggested. After placing the hands, I've found out that my movement is basically dead. The chrono doesn't work and the seconds hand doesn't tick away. Yet, the hour and minute hands keep time. I think I've had it for this project. Maybe somebody else would like to take over? On the other hand, this project went smooth as butter... Link to comment Share on other sites More sharing options...
nick1972 Posted November 29, 2010 Report Share Posted November 29, 2010 Wow very nice, what parts did you use? Link to comment Share on other sites More sharing options...
The Red Baron Posted November 30, 2010 Report Share Posted November 30, 2010 nomad, thats a beauty! Link to comment Share on other sites More sharing options...
miagi Posted November 30, 2010 Report Share Posted November 30, 2010 id say stick to it nomad!! u've gotten this far, and it looks freakin amazing!! maybe get intouch with one of the board modders for help?? Link to comment Share on other sites More sharing options...
StormTooper4 Posted November 30, 2010 Report Share Posted November 30, 2010 That tudor chrono is well nice Link to comment Share on other sites More sharing options...
nomad89 Posted November 30, 2010 Author Report Share Posted November 30, 2010 (edited) Thanks, everybody. I'm glad that there's some Tudor love here, unlike that other site. Wow very nice, what parts did you use? Here are the specs: rep Daytona 116520 casegen dial and handsswiss 7750DW 6263 Daytona bezel (it fits!)Clark 118 (I'm not a fan of sapphire crystals) Here's another Tudor I put together: specs: • gen dial • gen hands • rep case (I think it may be a Yuki) • rep bezel insert • Clark 125 Edited November 30, 2010 by nomad89 Link to comment Share on other sites More sharing options...
lhooq Posted November 30, 2010 Report Share Posted November 30, 2010 I'm not much of a Submariner guy, but I really love blue Subs. That looks great! (And so does the Pre-Tiger.) I know that there are some guys on RWG who have been gathered more than one 7734 in preparation for their 7032 projects. Hope you get your movement fixed, or find a replacement in good running order. Link to comment Share on other sites More sharing options...
nick1972 Posted December 4, 2010 Report Share Posted December 4, 2010 Here's another Tudor I put together: specs: • gen dial • gen hands • rep case (I think it may be a Yuki) • rep bezel insert • Clark 125 That's nice one also but the hands are not gen, do you have macro shots from the dial? Link to comment Share on other sites More sharing options...
nomad89 Posted December 4, 2010 Author Report Share Posted December 4, 2010 (edited) That's nice one also but the hands are not gen, do you have macro shots from the dial? I didn't think the hands were gen. But, the dial is 100%. Seller of dial and hands are two different people. Edited December 4, 2010 by nomad89 Link to comment Share on other sites More sharing options...
nick1972 Posted December 4, 2010 Report Share Posted December 4, 2010 I didn't think the hands were gen. But, the dial is 100%. Seller of dial and hands are two different people. Yep looks genuine I youre looking for the right snowflake hands, order them at wholesale on ebay. I know most of the people here don't like there buisiness but to me there always been fair and the snowflake hands they sell are good reps with the right size. Link to comment Share on other sites More sharing options...
nomad89 Posted December 5, 2010 Author Report Share Posted December 5, 2010 I think my hands look okay. Link to comment Share on other sites More sharing options...
OI812 Posted December 5, 2010 Report Share Posted December 5, 2010 I think my hands look okay. Having owned/own BOTH of the geniunes I can attest that you've done a MARVELOUS job Nomad! Congrats and well done! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now