Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Friday Wristies (27-APR)


ubiquitous

Recommended Posts

New watch arrived today....unfortunately my wrist is too large for the rubber strap but it looks good

granoris.jpg

Nice one Gran!! Too bad about the strap though.....

Link to comment
Share on other sites

Nice one Gran!! Too bad about the strap though.....

Thanks! but I knew it was pretty tight when I bought it..missing 4mm of strap....so have to make into a gift or get another strap (and that will not be easy on this one given the special lug design)

Link to comment
Share on other sites

@fredd

Looks like they fitt the case poor!

Should the endlinks looks like that from the side?

Yes, you are correct that the end links do not fit the case (which came from Phong) perfectly. The end links did fit my old MBW case perfectly, but, unfortunately, the 1570 movement did not fit perfectly in the MBW case, which is why I replaced it with Phong's case. I could probably reshape the end links to reduce some of the slack, but, then, they might not fit onto my 1665 as well. In any case, the watch/bracelet looks ok on my wrist & the slight looseness (which is somewhat common to many vintage Rolex bracelets, especially as they wear & stretch) does not bother me enough to want to modify them

pre55140111.jpg

whiteflower55130012__-2_tonemapped21.jpg

Link to comment
Share on other sites

All the gens I have ever had had totally mashed up end links and they were the ones worth the most as they were untouched (never fixed).

The reason the end links are mashed-up is because the bracelet is a franken.

The seller (or a previous owner) took a relatively common Rolex bracelet & swapped the end links from another watch to form a bracelet for a more popular (expensive) watch. Until recently, when vintage Rolex values began to skyrocket due to the Web, you never saw damaged/bent/scratched end links or hinges (where permanently affixed end links attach to the bracelet). These days, it is rare NOT to see damaged hinges, because nearly every bracelet designed to fit a popular (expensive) vintage Rolex has been monkeyed with. You can see it here with the gen 9315/380 on my pre-Comex

5513551420061.jpg

Under normal circumstances, there these hinges should be the least damaged part on a bracelet. Yet, these days, it is common to see a pristine bracelet with mangled hinges.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up