whoopy12 Posted August 26, 2013 Report Share Posted August 26, 2013 Hey everyone, thought I'd start a new thread as the previous two were getting a bit cluttered. Dials arrived today! I would have taken more pictures, but I only have a crappy iphone camera to work with atm. First thoughts: I'm amazed at the level of consistency in regards QC. No dials have any discernible print problems - everything looks crisp as it should. I will be setting up a post in the "parts" section, as I have more dials from this batch available. While I'm extremely happy with the outcome of this batch, I will not be doing another run (so please don't ask me). I want to thank all of the preorderer's on rwg that made this possible. If it wasn't for you, this wouldn't have ever picked up steam! Also, big shout out to aero dave for spearheading the preordering Link to comment Share on other sites More sharing options...
netniet Posted August 26, 2013 Report Share Posted August 26, 2013 Thank you for a very nice dial. Can't wait to see it in my mailbox soon. Link to comment Share on other sites More sharing options...
ceocorona Posted August 26, 2013 Report Share Posted August 26, 2013 thats some serious work you put into these dials. good work Link to comment Share on other sites More sharing options...
Aero_Dave Posted August 27, 2013 Report Share Posted August 27, 2013 Whoopy's, I only did a very small part (what I could to help) but You my friend, did all of the Hard work! I'm very excited and can't wait to get my dial! Thank-you again, for making this project a reality for everyone. Dave... Link to comment Share on other sites More sharing options...
whoopy12 Posted August 28, 2013 Author Report Share Posted August 28, 2013 UPDATE: Most of the orders have been shipped. I will be shipping the rest tomorrow! Sidenote: These guys look GREAT under a loupe - Whoop Link to comment Share on other sites More sharing options...
Akira Posted August 28, 2013 Report Share Posted August 28, 2013 Hot stuff whoppy! Link to comment Share on other sites More sharing options...
CptTripps Posted August 28, 2013 Report Share Posted August 28, 2013 ::: golf claps :::Well done sir. Well done. Link to comment Share on other sites More sharing options...
Ephry73 Posted August 28, 2013 Report Share Posted August 28, 2013 My hat's off to you whoop. Dealing with factories and different sources can be daunting to say the least. The dials look great. E Link to comment Share on other sites More sharing options...
whoopy12 Posted August 29, 2013 Author Report Share Posted August 29, 2013 Took some more photos! Still not satisfied with the picture quality, as the dials look amazing in person - Whoop Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted August 31, 2013 Report Share Posted August 31, 2013 again: VERY NICE! glossy 14060 (16610 sized) dial time? nudge nudge Link to comment Share on other sites More sharing options...
Gabus Posted August 31, 2013 Report Share Posted August 31, 2013 Mine came yesterday, very satisfied. Thanks for all the work. Link to comment Share on other sites More sharing options...
CptTripps Posted September 2, 2013 Report Share Posted September 2, 2013 Both of mine arrived. They're perfect! One question: Who's able to lume these for us? I've got a 1680 and 1016 that I'd like to have a vintage lume applied to. Outstanding work Whoopster! Link to comment Share on other sites More sharing options...
woof* Posted September 3, 2013 Report Share Posted September 3, 2013 Both of mine arrived. They're perfect! One question: Who's able to lume these for us? I've got a 1680 and 1016 that I'd like to have a vintage lume applied to. Outstanding work Whoopster! I'm curious too, with zig gone, who can do work on a similar level? Link to comment Share on other sites More sharing options...
Ephry73 Posted September 3, 2013 Report Share Posted September 3, 2013 again: VERY NICE! glossy 14060 (16610 sized) dial time? nudge nudge That would just be sweet if we can get a few of those built. E Link to comment Share on other sites More sharing options...
dieselpower Posted September 3, 2013 Report Share Posted September 3, 2013 Got my dials today. Excellent work Whoopy, well done 1016 here we come! Link to comment Share on other sites More sharing options...
Jkay Posted September 4, 2013 Report Share Posted September 4, 2013 I'm curious too, with zig gone, who can do work on a similar level? As far as my opinion is concerned, Vaccum is the #1 lume man nowadays. Other people do lume, and they are fine, and they should keep praciticing. I dont mean to shit on anyone's work .. just keep practicing. the microscopic stripes adjacent to the date window on my vac-lumed 500M Link to comment Share on other sites More sharing options...
cc33 Posted September 4, 2013 Report Share Posted September 4, 2013 Can vac do vintage lume? It shouldn't glow and there are two versions, flat and slightly raised depending on the model.. Link to comment Share on other sites More sharing options...
ck5533 Posted September 4, 2013 Report Share Posted September 4, 2013 kent parks does great job too on lume but slow in reply though. Link to comment Share on other sites More sharing options...
cc33 Posted September 4, 2013 Report Share Posted September 4, 2013 He won't touch these dials, they would have to be redials on original plates at the very least for him to do it Link to comment Share on other sites More sharing options...
whoopy12 Posted September 4, 2013 Author Report Share Posted September 4, 2013 I would check out Rolex Addict and Big Dazza for vintage lume work - both have that puffy/not so puffy tritium look down imo Link to comment Share on other sites More sharing options...
Jkay Posted September 4, 2013 Report Share Posted September 4, 2013 Can vac do vintage lume? It shouldn't glow and there are two versions, flat and slightly raised depending on the model.. You can certainly ask him. Link to comment Share on other sites More sharing options...
w0lf Posted September 4, 2013 Report Share Posted September 4, 2013 He won't touch these dials, they would have to be redials on original plates at the very least for him to do it That's certainly a new development since KP has relumed hundreds of reps in the past. Link to comment Share on other sites More sharing options...
cc33 Posted September 4, 2013 Report Share Posted September 4, 2013 Has he!? I really thought he had some sort of rule. I'm sure that someone told me he wouldn't do a lume job on a replica dial, but a quick online search and it seems he will accept any job, apparently he likes to take his time but it's worth it if it looks amazing in the end imo. Sorry guys, I really didn't think he or jack at IWW would want to be associated with rep dials but I guess a job is a job and it looks like they do... Link to comment Share on other sites More sharing options...
Aero_Dave Posted September 4, 2013 Report Share Posted September 4, 2013 I just got my dial today! Whoo Hoo, it looks GREAT! Thanks again Whoopy's! Dam nice project! Dave... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now