Libertatia Posted September 3, 2013 Report Posted September 3, 2013 I just purchased one of those smp ceramics with a ETA 2824 movement, but it arrived doa. I don't want to send it back to China just yet, and tomorrow I will receive the tool to open the caseback and look at what's going on. It was working when it was sent according to the TD, what could possibly have gone wrong with it during shipping that could have caused it to completely freeze? I have only played around with 21js, so this will be alien to me, and if it is just a screw or 2, I could save sending it back, time and money......Any help would be greatly appreciated!Papabear
panerai153 Posted September 3, 2013 Report Posted September 3, 2013 Probably better to send it to one of the watch repair folks on the forum, get it fixed and serviced. In the long run better than the hassle of sending it back to China, customs worries etc.
Mike on a bike Posted September 3, 2013 Report Posted September 3, 2013 panerai153 a 21j better off getting a new one and taking a hammer to the old one. Who works on those anyway? Ok read that wrong not 21j an Eta, so send to smithy need to service these except in rare cases upon receipt anyway.
woof* Posted September 3, 2013 Report Posted September 3, 2013 Yep, send it off for service. Always include a service when you buy a watch, and you will always be happier. The TD's can be great guys and all, but when you order your watch...they rarely stock them and they go and get your watch, pack and ship to you. The movements that come in these reps can be pulls from older watches or broken and quickly repaired movements. Not a nice new freshly installed eta movement. Sometimes you can get lucky and buy a new rep without a problem, but your better off in the long run just to figure a service when you buy it.
Jkay Posted September 4, 2013 Report Posted September 4, 2013 Any help would be greatly appreciated!Papabear What country are you in? That will help us know who to send you to.
Libertatia Posted September 4, 2013 Author Report Posted September 4, 2013 Having opened it, it all seems ''ok'', Compared to pictures, no missing screws etc..... One thing I noticed was when I pushed the balance wheel, it didn't rock like my other watches. Its just still.... Doesn't move or wobble. Of course I won't try anything myself, but it pretty bloody dirty also. And smells of oil. 1. Send it back to China and have it replaced with probably another dirty movement? 2. Send it to uk watch services over on RWI, have it fixed/ cleaned?
sgtguk Posted September 4, 2013 Report Posted September 4, 2013 Certainly worth having it serviced mate especially if your keeping it long term I just had my first DOA on an Abyss 44mm, sent it to MD for a service and reportedly working well now! Mind you that was my first Doa out of about 80 watches
mymanmatt Posted September 4, 2013 Report Posted September 4, 2013 a slight tap on the side may reposition the balance staff, if thats whats wrong. If it was dropped while running that will happen. If doesn't start, service it.
Libertatia Posted September 4, 2013 Author Report Posted September 4, 2013 I think in the long run a service is the best option..... I just hope it can be fixed...
panerai153 Posted September 4, 2013 Report Posted September 4, 2013 I feel sure it's fixable, and with a good service it should be good to go for e few years.
Libertatia Posted September 13, 2013 Author Report Posted September 13, 2013 The result of this was as suspected by members - out of place balance wheel due to big knock - all fixed for £20, no sending back to china, happy papabear 1
St01000388 Posted September 14, 2013 Report Posted September 14, 2013 Who did you have do the work for you?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now