Falco Posted February 7, 2007 Author Report Posted February 7, 2007 This is the most representative picture I could find of the Bond watch: Plus need to have lugholes and ETA. Other suggestions??
Jimster Posted February 7, 2007 Report Posted February 7, 2007 Greetings, Please put me down for one. It would be great to have the correct end links. I believe the number is "65" for that 7206 if I remember correctly. Note the difference in the detail on the end link. Thiose end links were "fixed" to the bracelet. Jim
klingsor Posted February 7, 2007 Report Posted February 7, 2007 this evening i've asked to silix boys to tell here what they think about...
paragonrep Posted February 7, 2007 Report Posted February 7, 2007 If the rep is good enough, I would be up for several!!
Jetsons Posted February 7, 2007 Report Posted February 7, 2007 I'm in as well but they need to at least install proper side case holes & leave the dial white or better yet, ivory.....just not that plastic looking yellow most have. Big plus if it were available with an ETA. There would be no problems fitting hands with slower beat ETA movements if one wanted to do so. A few I managed to find in my hard drive. Added a few more:
Falco Posted February 8, 2007 Author Report Posted February 8, 2007 Some more photos... first one is a 6536 and the next is a 5508. They're pretty close to each other, both have the small "Twinlock" crown. Wow Nanuq, That 6536 looks but stunning gorgeus and crazy sick radioactive ! Great pics Jetsons! By the way, Silix should be reading this thread and checking pictures. Hopefully he'll post some info here what the progress is with the watchmaker Anybody know how long this Chinese new years holliday is?
manuel Posted February 8, 2007 Report Posted February 8, 2007 Count me in. After all, its a cheap rep to have fun with.
r11co Posted February 8, 2007 Report Posted February 8, 2007 And yet there are still so few votes in my poll. Get over there and vote, people!!
klingsor Posted February 8, 2007 Report Posted February 8, 2007 And yet there are still so few votes in my poll. Get over there and vote, people!! done .....
paragonrep Posted February 8, 2007 Report Posted February 8, 2007 (edited) In reference to Falco's post #76 on this topic: That is really, really close! Except, the triangle should be silver and the bezel insert shouldn't have separate minute markers between 0-15. Other than that, it's got it: coined bezel edge instead of scalloped, no crown guards, no date, exact face with no date. Hands and lume all look right. Also, the bezel pearl of the 'bond' looks to be straight lume with no metal edge. I'd hate to see the typical cheap, shiney bezel pearl slapped on there. I've attached two screenshots from Goldfinger that show Connery's Rolex. Also, the nato strap doesn't appear to be the black/grey version everyone seems to refer to, but rather there are thin red pin stripes surrounding the grey stripes. If we could get a version that looks like the movie screen shots with a decent movement and water resistance, it would be a done deal for a lot of people I know... IF Silix can get enough interest and get one like this, I would be one happy collector Edited February 8, 2007 by paragonrep
paragonrep Posted February 8, 2007 Report Posted February 8, 2007 (edited) What does everyone want: metal band, nato strap, or watch only without band or strap? Edited February 8, 2007 by paragonrep
robertk Posted February 8, 2007 Report Posted February 8, 2007 Interesting thread. I picked bup a Bond sub From MBW (via Lucky???) before he went sour. I'm not sure of the model but it gets lots of attention from rolex collectors (they know its a rep and just can't believe how good it is). I'd definitely be in for another one
rower Posted February 8, 2007 Report Posted February 8, 2007 I am in for this one. I have wanted one of these since seeing Goldfinger. Let me know asap. Thank you in advance for all your work.
RollyPolly Posted February 9, 2007 Report Posted February 9, 2007 (edited) http://cgi.ebay.ca/ROLEX-Oyster-SUBMARINER...1QQcmdZViewItem HOLY [censored]! Edited February 9, 2007 by RollyPolly
Falco Posted February 9, 2007 Author Report Posted February 9, 2007 Update, Silix was asking me this but I'm not sure what shade of yellow??? "the correct color of the markers should be yellow, right? " Anybody got a pic of the dial markers with correct/best colour??
Falco Posted February 9, 2007 Author Report Posted February 9, 2007 Not yellow! Make them the faintest tan color, with a *slight* yellow tint. Some aged markers are ivory colored and that looks best to me. Check out the ivory markers on the 5508 and the tan 12:00 index showing beneath the green crud that fell off the 6536. That's what you want. Nanuq can you post a better picture of the 5508 without the crystal reflection? it'll be easier to see the colour shade
Guest RiverwindMDS Posted February 9, 2007 Report Posted February 9, 2007 And yet there are still so few votes in my poll. Get over there and vote, people!! sorry, I saw only now that thread... VOTED
paragonrep Posted February 9, 2007 Report Posted February 9, 2007 Update, Silix was asking me this but I'm not sure what shade of yellow??? "the correct color of the markers should be yellow, right? " Anybody got a pic of the dial markers with correct/best colour?? Since we're going for a James Bond sub, why not use the movie screenshot as a reference for color? I think Nanuq is correct when he says the color should be ivory.
Jetsons Posted February 9, 2007 Report Posted February 9, 2007 Perhaps something along these lines be acceptable for the dial finish. BTW, this is a gen dial.
klingsor Posted February 9, 2007 Report Posted February 9, 2007 Nanuq can you post a better picture of the 5508 without the crystal reflection? it'll be easier to see the colour shade ref.5508
Falco Posted February 10, 2007 Author Report Posted February 10, 2007 wow, klingsor, that last 5508 is just perfect! Silix where are you?
klingsor Posted February 10, 2007 Report Posted February 10, 2007 wow, klingsor, that last 5508 is just perfect! Silix where are you? many thanks... today i have two new email from silix boys...they are in the middle of the party i think... (chinese new year... ) they thanks to have had my complete suggest plan of working for two watches... i'm making also a new dossier with photos and relevant mods i know to make from the old silix watches 6538 and 6536-1... 5508 and 5510 are easy to make having the first project i gave to them.. the only thing i'm still asking is to suggest mods (speaking about 6538 ...6536-1 .... or 5508...) engravings...hands...dials... case-back-cutted... crown... case back....we all know these difference ...is it enough ? or some one want to add some other suggest? here under some pics ref.5508 ref.6536-1 ref.6538 4 LINES 6200 group
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now