p550racer Posted May 5, 2008 Report Share Posted May 5, 2008 To ensure that the palp crown stays away from the case simply make the "ditch" as Siver surfer put it deeper, that is the [censored] of the ditch longer. In this case to ensure sealing one can always add a second crown gasket. The palp too close to the case just does not look right. Carpe Diem. Quote Link to comment Share on other sites More sharing options...
p550racer Posted May 5, 2008 Report Share Posted May 5, 2008 My post had a censored word (strange). The word I typed was F L A N GE. So the Ditch F L A N G E needs to be slightly taller/longer. Carpe Quote Link to comment Share on other sites More sharing options...
kosemkamtsan Posted May 5, 2008 Report Share Posted May 5, 2008 i would consider a smaller bevel than that on the Palp crowns. if you look at the gen crowns, the teeth go across the crown almost to the edge with a slightly smaller bevel than palp's. any thoughts on this? Quote Link to comment Share on other sites More sharing options...
fishgodeep Posted May 5, 2008 Report Share Posted May 5, 2008 T - Always up for better parts if someone can take the time to make them... My thoughts echo what has been said - the next generation crown should be 2.0mm 60 "Teeth" Deeper recess for lever than PALP (Avoid having to trim levers) High polished all over including the recess. Slightly deeper "ditch" recess on the underside and deeper collar to ensue pronounced 1mm gao from the case. If you can do these then I'd be up for a couple at least. Good luck Quote Link to comment Share on other sites More sharing options...
t Posted May 5, 2008 Author Report Share Posted May 5, 2008 i can produce it like all you guys want. But my english is very poor and i don Quote Link to comment Share on other sites More sharing options...
chefcook Posted May 6, 2008 Report Share Posted May 6, 2008 In German: Damit die Krone weiter vom Geh Quote Link to comment Share on other sites More sharing options...
t Posted May 6, 2008 Author Report Share Posted May 6, 2008 thanks Max now i Quote Link to comment Share on other sites More sharing options...
chefcook Posted May 6, 2008 Report Share Posted May 6, 2008 (edited) If it expedites the process I can offer to make the drawings (german Diplom Ingenieur and british B.Sc. in mechanical engineering). 3D CAD is possible but 2D low tech would be more fun. EDIT: ... or if it saves money ... Edited May 6, 2008 by chefcook Quote Link to comment Share on other sites More sharing options...
ta8088 Posted May 6, 2008 Report Share Posted May 6, 2008 T this is great that you are willing to look into trying to do a project like this. Thanks! Are you going to do both auto and manual crowns? Quote Link to comment Share on other sites More sharing options...
sssurfer Posted May 6, 2008 Report Share Posted May 6, 2008 sounds good guys? It does not sound good. It sounds excellent. i think the price of 40euro (like PALP and Pam) is way to high. I hope i can realise a price of 20- max 30euro. ...And this sounds even better! Quote Link to comment Share on other sites More sharing options...
PAMman Posted May 6, 2008 Report Share Posted May 6, 2008 I think a deeper recess for the lever could cause problems with too short levers. Better modify the lever than having a crown that is useless because of a short lever... Good point, but I think that the Palp crown went much too far in this direction. In my experience, even the shortest rep crown levers were way too long for Palp's crowns and still had to be drastically shortened, leaving them an inaccurate shape. Some feedback on this aspect would be useful, specifically; Did the Palp crowns have too shallow a recess, with the result that even short levers had to be shortened significantly further? Please respond. Quote Link to comment Share on other sites More sharing options...
t Posted May 6, 2008 Author Report Share Posted May 6, 2008 If it expedites the process I can offer to make the drawings (german Diplom Ingenieur and british B.Sc. in mechanical engineering). 3D CAD is possible but 2D low tech would be more fun. EDIT: ... or if it saves money ... sounds good you are our man. Quote Link to comment Share on other sites More sharing options...
fishgodeep Posted May 6, 2008 Report Share Posted May 6, 2008 Did the Palp crowns have too shallow a recess, with the result that even short levers had to be shortened significantly further? Please respond. Agreed PamMan- I have never come across a CG lever that did not need to be shortened to work with a PALP crown and obtain the desired clearance from case side as well. Cheers Quote Link to comment Share on other sites More sharing options...
t Posted May 6, 2008 Author Report Share Posted May 6, 2008 Agreed PamMan- I have never come across a CG lever that did not need to be shortened to work with a PALP crown and obtain the desired clearance from case side as well. Cheers all is no problem if we have professional drawing... ok let Quote Link to comment Share on other sites More sharing options...
Fish Posted May 6, 2008 Report Share Posted May 6, 2008 (edited) Some details in German: Durchmesser: 9,9mm Z Edited May 6, 2008 by Fish Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 6, 2008 Report Share Posted May 6, 2008 nevermind Quote Link to comment Share on other sites More sharing options...
chefcook Posted May 6, 2008 Report Share Posted May 6, 2008 Fish: Deine Ma Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 6, 2008 Report Share Posted May 6, 2008 Die Ma Quote Link to comment Share on other sites More sharing options...
chefcook Posted May 6, 2008 Report Share Posted May 6, 2008 Interessantes Bild einer original Krone wegen der Fase an der Verzahnung: Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 6, 2008 Report Share Posted May 6, 2008 Fase an der Verzahnung ist schon dargestellt.. Quote Link to comment Share on other sites More sharing options...
chefcook Posted May 6, 2008 Report Share Posted May 6, 2008 Jau supi Ist 3D Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 6, 2008 Report Share Posted May 6, 2008 Ja, br Quote Link to comment Share on other sites More sharing options...
Dani Posted May 6, 2008 Report Share Posted May 6, 2008 ICH BIN Thats about all the German i now Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 6, 2008 Report Share Posted May 6, 2008 German high quality grade AAAA swiss 1+ engineering only works in german language.. Quote Link to comment Share on other sites More sharing options...
scoobs1971 Posted May 6, 2008 Report Share Posted May 6, 2008 "I just love it when a plan comes together...." Good work, guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.