what2 Posted April 7, 2009 Report Share Posted April 7, 2009 Looking for a no crown guard bond sub, I notice Silix has them but have read some negative reviews. Any other sources selling with the original 38mm case size, I looked at trusty time but his are 41mm like the current subs Link to comment Share on other sites More sharing options...
alligoat Posted April 7, 2009 Report Share Posted April 7, 2009 Without going to NDTradingcorp.com and paying a lot of money and essentially building a franken, I don't know what you can do. Here's a case from Silix: http://www.silix-prime.com/product.asp?id=1886 But the dial and crystal are wrong. Then maybe you could swap out a dial from Paul: http://www.pam111.com/product_info.php?cPa...roducts_id=1811 Find a decent plastic crystal and bezel insert and you're good to go- assuming you can do the mods. The Silix case is the one Freddy has done wonders with constructing a 6542 GMT (no cg's). Or maybe you just buy the watch from Paul and go on down the road- it ain't great, but with a little aging, it might look ok. there's just not much out there 'out of the box', so to speak. Link to comment Share on other sites More sharing options...
what2 Posted April 7, 2009 Author Report Share Posted April 7, 2009 Without going to NDTradingcorp.com and paying a lot of money and essentially building a franken, I don't know what you can do. Here's a case from Silix: http://www.silix-prime.com/product.asp?id=1886 But the dial and crystal are wrong. Then maybe you could swap out a dial from Paul: http://www.pam111.com/product_info.php?cPa...roducts_id=1811 Find a decent plastic crystal and bezel insert and you're good to go- assuming you can do the mods. The Silix case is the one Freddy has done wonders with constructing a 6542 GMT (no cg's). Or maybe you just buy the watch from Paul and go on down the road- it ain't great, but with a little aging, it might look ok. there's just not much out there 'out of the box', so to speak. This has probably been asked 1000 times, how does the quality from paul, silix & Andy compare. Being 100% accurate to history does not really bother me as much as the overall look and accurate case size. Link to comment Share on other sites More sharing options...
freddy333 Posted April 7, 2009 Report Share Posted April 7, 2009 This has probably been asked 1000 times, how does the quality from paul, silix & Andy compare. Being 100% accurate to history does not really bother me as much as the overall look and accurate case size. I have never dealt with Andy, but if, by quality, you mean manufacturing quality, then they are ok (not great, but ok). If you mean accurate, relative to a specific gen model, then no, the quality is poor. Specifically, regarding Alligoat's comments about using Silix cases, you might want to read this, this & this. And to update my 'still waiting' comments in some of those links, to date, I am STILL waiting (& receiving email excuses from Silix describing yet more delays ). Link to comment Share on other sites More sharing options...
what2 Posted April 7, 2009 Author Report Share Posted April 7, 2009 I have never dealt with Andy, but if, by quality, you mean manufacturing quality, then they are ok (not great, but ok). If you mean accurate, relative to a specific gen model, then no, the quality is poor. Specifically, regarding Alligoat's comments about using Silix cases, you might want to read this, this & this. And to update my 'still waiting' comments in some of those links, to date, I am STILL waiting (& receiving email excuses from Silix describing yet more delays ). Looks like Paul is the way to go, and I will keep and eye on the case grinding project Link to comment Share on other sites More sharing options...
Ronin Posted April 7, 2009 Report Share Posted April 7, 2009 Remember, site pics are often outdated. Send an email before you buy. Factories change. You may wind up with CGs and no lug holes despite what the site shows. Especially if they drop ship. Link to comment Share on other sites More sharing options...
alligoat Posted April 7, 2009 Report Share Posted April 7, 2009 I didn't realize that Freddy was having problems getting the Silix case. I did kind of skim the old post of his and note that the case measure 39.5mm. That's the same as Paul's 5508. Heck, they could come from the same factory, but the silix one had a very nice bezel- but that could be changing. Like you say, the one from Paul isn't too bad and properly aged, hardly anyone's going to know- there just aren't that many WIS running around. Link to comment Share on other sites More sharing options...
what2 Posted April 7, 2009 Author Report Share Posted April 7, 2009 I am more after the general size and look anyway, I have aged dials and hands using coffee so it will look beat up soon enough. Link to comment Share on other sites More sharing options...
ShawnBeever Posted April 7, 2009 Report Share Posted April 7, 2009 I think the one from Silix is the only case available with the coin edge bezel. This may be what freddy is holding out for. Link to comment Share on other sites More sharing options...
freddy333 Posted April 7, 2009 Report Share Posted April 7, 2009 I think the one from Silix is the only case available with the coin edge bezel. This may be what freddy is holding out for. Yes, the Silix ROLS176 is the only rep I have found with both the correct bezel & case dimensions for use in vintage Rolex projects (my 1st 6542 currently resides in 1 & I have a 6536 waiting (since January) for the other to be shipped). The trouble is that Silix is slow to the point that I have finally been forced to seek assistance of the Mods in getting him to respond. After repeated promises (since early February) that 'we will ship your watches this week', all I have received are excuses & apologies, followed by more of the same. Until further notice, I would deal with Silix ONLY as a last resort & ONLY with money you are willing to gamble with. Link to comment Share on other sites More sharing options...
TeeJay Posted April 7, 2009 Report Share Posted April 7, 2009 I wouldn't even deal with Silix under those circumstances, as with a gamble, there's at least the possibility of getting a result. I'd go so far as to say only deal with Silix if it's money you would actually be prepared to flush down the toilet... Freddy, Best of luck getting a resolution to your issue. In the end, I just had to wash my hands of the deal. I hope you don't have to do likewise. Link to comment Share on other sites More sharing options...
what2 Posted April 8, 2009 Author Report Share Posted April 8, 2009 Silix, Paul and Trustytime all have pretty much the same watch, at diffeing prices. Paul is the lowest price, Silix has a more "accurate" rep... Go with Paul given the issues with silix shipping? Link to comment Share on other sites More sharing options...
alligoat Posted April 8, 2009 Report Share Posted April 8, 2009 Why not? Actually I've had good results with all 3, but I'm not sure what the deal with Silix is currently. Paul did get me an extra dial a few years ago when I was ordering a watch and shipped me a replacement dial when a stick marker fell off of one watch in shipping. I've had good results w/ him. Link to comment Share on other sites More sharing options...
Guest Carl Posted April 9, 2009 Report Share Posted April 9, 2009 Over a year ago I asked Jay at Silix about getting a coin edge bezel and a larger crown on the 5510 rep he sold and I bought. He actually replied and said the demand was too small to do the rep mods. I have to say that is about the best I ever got from him. Carl Link to comment Share on other sites More sharing options...
what2 Posted April 9, 2009 Author Report Share Posted April 9, 2009 Ordered from Paul today, lets see what happens. Silix did write back saying he had what I was looking for, though I did not want to risk it with what I have heard. He did say that the watch now has a new dial. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now