Cort 616 works. But its not really interchangeable with 6497. Modifications (or new parts) needs to be done to hands, movement holder, dial, etc. But it will fit in a 47mm and possibly a 45mm (I've never tried 45mm).
That will look amazing on your watch. Can't wait to see it mounted.
Here's my one and only PVD with an unknown strap I picked up on the sales forum awhile ago. Real soft and comfy.
When I attempt to set the time forward, the crown turns, and I can hear tiny clicks as I turn the dial. The hands move forward up to like 15 minutes and stops. But if I turn it in the opposite the direction I see no problems.
Thanks for the info R. Unfortunately none of the local watchsmith are rep friendly.
The problem is that I cannot set the time of the watch forward...I can only set it by going backwards.
I'm having problems with my 2892-A2 in my PAM 27a. May need to get it replaced.
Does anyone know if the ETA 2892-A2 from ofrei or cousins is the same as that of the 2892-A2 in the PAM 27A (minus the Soprod PR)?
Was thinking of picking one up to do a swap.
thnx, lex
If the stem screw is too tight you will have a difficult time putting it into the set time position. In this case just turn it 1/4 to 1/2 turn and retry.
Are you sure the stem is all the way in? Release the stem screw one or two more turns and try to stick it all the way in. Then tighten it. Then move it into the setting time position and push it back in and try to wind it.