hi this sounds like unfortunately your hour counter lock on both watches has failed or not locking your hour counter when resetting to zero. you see that this is always running even if your chrono is not but is locked into place by the lock the part number for this part is 8690. hope this helps
hi now I might be wrong but has your watch got movement clamps because if it hasn't the spring will sit on top of your movement ring and when you put the case back on it will push the movement ring down thus holding your movement in place that would be why you wont have any movement clamps ive seen this before on some reps .hope you get it sorted
HI just been looking on the bay and found this 45 quid plus shipping and its a 4 watch winder plus 6 watch storage item number is 310831185865 hope it helps
hi im not new to the forum but don't say much.i had a similar problem with them not so long back its that I had reached the limit they set for buying and selling think iit was something like 1200 pounds or maybe more I had to contact them to get it lifted as I have no passport either I had to submit docs to verify who I was and that I was the registard owner of the bank account that was set up for my paypal account all in all it took 5mins to do and I even questioned them about the safety of sending docs via the net.Then I went into my paypal account and upgraded it.now I carnt remember exactly what I did but ive had no trouble from them again and the upgrade didn't cost anything either.but if you look on the bay for FAQ about your problem you should get an answer from that took me a while to search but its in there somewhere.hope you get it sorted as its a pain and another thing if you have funds in there they wont let you take it out until its verified .
sorry but i dont do pics and if you want some comfirmation that i fixed it try pm ing weepy on rwg although i havent seen him on there for a while he will tell you that he got his bulgari tourby and 2 others back fixed and running
Hi you might find thats its just the hairspring thats disslodged.that was one problem i found when i looked at one for someone.no so much a easy fix but its possible .just uncase the movement and check ..........
HI to everyone
i agree with the last answer its just a pic of the right watch you want to buy and if its ticking it gets sent out. thats my oppinion as ive bought of trusted dealers whom have good reviews sadley to find that faults that were reported by them have not been fixed and item just sent out. i dont [censored] them off just wont buy from them again and this wasnt a cheapo either. they have all got to start somewhere but they have to earn your trust aswell..........
HI I WAS SEARCHING ABOUT THIS PROBLEM AS I HAVE THE EXACT SAME MOVEMENT AND PROBLEM WITH REGARDS TO GETTING THE STEM AND YOKE SPRING.APART FROM MINE IS STAMPED WITH 2824.2 I LOOKED ON COUSINS AND FOUND THAT THEIR PARTS ARE DIFFERENT AS I ORDERED PARTS AND THEN FOUND THAT THEY WERE NO GOOD SO I HAD AN OLD ETA MOVEMENT WITH PART OF THE KEYLESS WORKS STILL THERE EG YOKE SPRING THE ONLY DIFFERENCE WAS THE SHAPE AS THE ORIGINAL WAS LIKE AN OMEGA SIGN WITH LONG LEGS. THE 440 PART NO IS SPOT ON BUT I COULDNT GET IT THATS WHY I TRIED WAT I DID AND IT WORKS OK BUT WOULD STILL LIKE TO GET THE CORRECT SPRING FOR IT. IF POSSIBLE COULD YOU TELL ME IF THE 4 FLATS ON YOUR STEM ARE THINNER THAN A STANDARD ETA 2824/2836 STEM CHEERS
HI can anyone shed some light onto this one i have a 2824 eta which has rado on rotor and its hard to wind and hard to set time (stiff) and also the stem is twisted when removed. have tried another stem but carnt get it to fit.any remedies thanks