Pombok

Sent from my iPhone using Tapatalk

PAM111 straight up? Or with mods? Sent from my iPhone using Tapatalk

I'd say: 1. The thickness 2. The misaligned bezel 3. The heft of the bracelet. Sent from my iPhone using Tapatalk

Hi Goranot, I'm actually wearing my Daytona today and I still really like it. It's a stunning watch. I think the A7750 movement is very good, no issues, it's damn near silent, keeps great time, power reserve of about 36 hours. For the QC pics, I'd recommend looking at the dial, bezel alignment, that was my biggest issue if you read the original post. Check to see if the solid end links fit tightly. The 5mm difference in thickness is the one thing you can't change, either you own this beautiful watch and live with the difference, or seek out a franken build Daytona with the correct thickness, this will most likely cost over $1000 though. Overall I'm extremely happy with mine, she's a beaut! Sent from my iPhone using Tapatalk

Thanks Nanuq Sent from my iPhone using Tapatalk

Ok thanks, I'll look it up! Sent from my iPhone using Tapatalk

Caci, is that a yuki dial? Did you build it, or is it out of the box? Sent from my iPhone using Tapatalk

My pleasure [emoji120] Sent from my iPhone using Tapatalk

Hey guys, I came across these on etsy and thought I'd share. Might be a cool addition to your man cave or home office [emoji18] Sent from my iPhone using Tapatalk

I'll check out Anderson .Paak and let you know [emoji106] Sent from my iPhone using Tapatalk

Amazing! I'd love to see that thread! Sent from my iPhone using Tapatalk

You know it! Silky tunes.

The JF version with working chrono appears inferior to the BP version due to the fitting of the SEL's. This was mentioned earlier on in this thread. Sent from my iPhone using Tapatalk

I think the pf818 version is noob, I think, some of the guys on here will be able to advise better. The movement for the working chrono is great, the timegrapher stats are spot on, it's silent when you put it to your ear, it's a beautiful watch and yes I would buy it again, I'd just be much more firm with the TD about the bezel alignment, in hindsight i should have asked him to exchange it. I think an aftermarket bezel can be purchased for about $140 and I may go down that route. Sent from my iPhone using Tapatalk

The link from pf-818 is where I purchased mine, see the original pics in this thread. I can confirm the AR coating is terrific, the watch is crystal clear and the bezel shines and catches the light beautifully. The two issues with this watch are: 1. The thickness is 15mm whereas the gen is 11.5mm. 2. The markings on the bezel (on mine) are not aligned perfectly at 12,3,6&9. They are maybe 0.5mm misaligned. If you buy this watch, make sure you are very clear to Joshua (PF TD) that you wants unit with aligning bezel. Hope that helps. Sent from my iPhone using Tapatalk

I'm happy with the 15mm depth of the watch if it means I've got a working chrono, I don't think many would notice the 3.5mm depth difference whilst it's on the wrist. Are you able to source a new bezel? I'd prefer to pick one up from someone who can vouch for the alignment.

Phil, thanks again for the help. So let me try to capture the guidance: Acquire the non-chrono JF version. Acquire the BP bracelet which has better and tighter fitting SELs. Use the clasp from the JF. Pickup an aftermarket bezel, any idea of the approx cost of this? I checked on ebay and saw one for 140USD, however I the info was poor. Now for the big question, would I need to replace the movement so that the watch could have a working chrono? Not sure if the last part of my reply got posted: Would I be able to get a replacement movement so the watch had a working chrono? Would this fit into the 11.5mm case depth? Any ideas what movement? Sent from my iPhone using Tapatalk

Hey Phil, what is the Daytona non-chrono? I've searched and can't seem to find.

Thanks for the info, I'll do a bit of research into the JF. If BP is the likely maker of my watch, then why doesn't it have a BP bracelet with SEL? [emoji851] Any ideas where best to find an aftermarket bezel with thicker text? Sent from my iPhone using Tapatalk

Hi Phil, can you please explain JF, BP and SEL are acronyms for? Sent from my iPhone using Tapatalk

This piece arrived 2 days ago, noting that I am a newbie with a keen eye, here's my assessment: The cons: When I received the QC pics it appeared at the dial and bezel were slightly misaligned, I queried/challenged this with the TD in 3 separate emails and was assured, each time, that it was in alignment. After receiving the watch it's clear that the bezel is not accurately aligned, I also think the fonts on the bezel are also not great. My lesson learned here is to ask the TD to source a different unit for consideration. The Chronometer stop function is temperamental, sometimes requiring 3 attempts to work. The bracelet appears terrific in accuracy, however slightly lightweight, this is me being picky really. The pros: The case appears to be accurate. The dial seems accurate. The sapphire and ar coating is great, damn this thing is shiny! The lume is great. The A7750 movement is almost silent, listening to the caseback I hear that perfect quick ticking sound, music to my ears. The time keeping is great, I haven't put it on a timegrapher but the QC stats were all excellent. I'd like to hear the input from the community about how to improve the visual accuracy of this watch. Please be gentle, I'm a newbie! Sent from my iPhone using Tapatalk

Ok I'll start a thread [emoji108] Sent from my iPhone using Tapatalk

Sogeha, the bezel alignment on that genstein is pretty spot on [emoji16] Sent from my iPhone using Tapatalk

Gen bezel is my wish too, did you source yours or did it come with the watch? Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk