Cats Posted November 16, 2009 Report Share Posted November 16, 2009 Noticed this morning when i was categorizing my pics that my "new" MBW 1680 is starting to rust. Are this particals left over from a rehaut polishing that are rusting or is it a crapy stainless steel quality ??. Noticed ( but not pictured yet ) that it's also starting to rust at the 30 minutes part of the case. I will post some close up of the rust later but it's clearly visable at the 40 minutes part of the case. Is this normal ( i haven't seen it with all my other MBW and other "cheaper" rep's )and what has to be done. There is a new crystal on it's was so we will have access to the rehaut in due time. Thanks for reading and suggestiosn are welcome. Carpe Diem Cats Link to comment Share on other sites More sharing options...
Toadtorrent Posted November 16, 2009 Report Share Posted November 16, 2009 Oooh...never seen that before except on the SSD saturation dive test in toxic waters. Yikes. Link to comment Share on other sites More sharing options...
kbh Posted November 16, 2009 Report Share Posted November 16, 2009 Could be some cheap glue or some other Chinese funk between the case and the crystal that's turning brown. Let's hope it's not rust. Link to comment Share on other sites More sharing options...
alligoat Posted November 16, 2009 Report Share Posted November 16, 2009 Interesting. Rust indicates the presence of water. If you were using the watch for regular diving in salt water, some of the parts could be subject to surface rusting- bezel parts come to mind. But if you haven't been in the water, it's very unusual, to say the least. Maybe it is a quality control issue. Link to comment Share on other sites More sharing options...
Demsey Posted November 16, 2009 Report Share Posted November 16, 2009 I would imagine it is the quality of the steel at the point of manufacture; impurities in the content form of iron. The steel, obviously from a Chinese source, originated Lord knows where. It is recycled more likely than not. 'lanikai' posted a topic not too long ago discussing the advantages or the hype of Rolex 904L that drew a lot of comment from members who work in metalurgy and associated industry. It was interesting. I believe it were 'jmb' who planned on putting a well known watch case (MBW?) through scientific process to see what kind of 'crap' is really in there. Parts of Jimmy Hoffa no doubt. I would imagine yes, the act of polishing the rehaut exposed the ferrous stuff and it rusted. In low grade stainless steel this is called 'bleeding'. Another polishing may remove the culprit altogether, but may raise others. I had a clasp rust once, I figured polishing it would be a ritual to keep the rust from coming back. After one polish with a Dremel, it never did. The 'vein' of ferrous particle(s) was buffed out altogether. Perhaps if you repolish the rehaut but only concentrate on the affected areas you may resolve the issue. Interesting. Link to comment Share on other sites More sharing options...
rosnik Posted November 16, 2009 Report Share Posted November 16, 2009 I think it's a symptom of waterproof failure. The rust is due by the dial or movement, not by the case steel. Do you open this case? Link to comment Share on other sites More sharing options...
coolfire Posted November 16, 2009 Report Share Posted November 16, 2009 Could very well be oxidation... Link to comment Share on other sites More sharing options...
Cats Posted November 16, 2009 Author Report Share Posted November 16, 2009 Thanks guy's for your repsonse. I never swim ( don't even shower with it )with this watch and yes the case was opened during the modding process. I don't thinks that the crystal is glued because to my knowledge there was no glue used when the crystal was installed. I can remember that Omega told me during the modding process that he had doubts about the quality of the steel and that it felt softer/different then the usual MBW's he worked on. As mentioned aerlier it's going back for moddifications and for a new gen 127 so then we will have a clearer view on the issue. But this so called MBW keeps costing me a lot annoyance and money. Carpe Diem Cats Link to comment Share on other sites More sharing options...
rosnik Posted November 16, 2009 Report Share Posted November 16, 2009 A MBW copy of the Rep MBW?? Link to comment Share on other sites More sharing options...
Cats Posted November 16, 2009 Author Report Share Posted November 16, 2009 @ Rosnik , that questions is a definite yes if you ask me, This is the new "MBW" with all the troubles that i got from Narikaa. So you could call it a copie because it's definitely no improvement compared to the old one. Carpe Diem Cats Link to comment Share on other sites More sharing options...
rosnik Posted November 16, 2009 Report Share Posted November 16, 2009 Link to comment Share on other sites More sharing options...
jmb Posted November 16, 2009 Report Share Posted November 16, 2009 Demsey, I WISH I could do some analysis but the only "metalurgical" testing tool I have access to is a hardness tester! Link to comment Share on other sites More sharing options...
hiker01 Posted November 16, 2009 Report Share Posted November 16, 2009 Demsey, I WISH I could do some analysis but the only "metalurgical" testing tool I have access to is a hardness tester! J-, you could still use that tester on Demsey........ Link to comment Share on other sites More sharing options...
Guest avitt Posted November 16, 2009 Report Share Posted November 16, 2009 You didn't use fine steel wool to polish the rehaut, did you? Link to comment Share on other sites More sharing options...
Cats Posted November 16, 2009 Author Report Share Posted November 16, 2009 @ avitt, i didn't do the modding myself. Could be that fine steel wool was used and left some particals behind. I tried to shoot a few pictures more of the rust. I will post them tonight. Carpe Diem Cats Link to comment Share on other sites More sharing options...
FxrAndy Posted November 16, 2009 Report Share Posted November 16, 2009 I have a noob marina that likes to rust a bit on the lugs after swimming so it is possible that it is impurity in the steel Link to comment Share on other sites More sharing options...
freddy333 Posted November 16, 2009 Report Share Posted November 16, 2009 Must be moths. Link to comment Share on other sites More sharing options...
Demsey Posted November 16, 2009 Report Share Posted November 16, 2009 Demsey, I WISH I could do some analysis but the only "metalurgical" testing tool I have access to is a hardness tester! Who was it then? 'Justasgood'? Crap, don't make me use 'Search'. For Christsakes. @Hike, Yeah? Well, I, uh, well, I got nothin' now, just better hope I don't log on drunk! Make a Marine cry. Link to comment Share on other sites More sharing options...
ubiquitous Posted November 16, 2009 Report Share Posted November 16, 2009 Who was it then? 'Justasgood'? Crap, don't make me use 'Search'. For Christsakes. Dems- I thought it was Bike Mike? Link to comment Share on other sites More sharing options...
Demsey Posted November 16, 2009 Report Share Posted November 16, 2009 Dems- I thought it was Bike Mike? YES! You're a life saver Ubi. Frankly speaking? 'Search' scares me. Link to comment Share on other sites More sharing options...
jmb Posted November 16, 2009 Report Share Posted November 16, 2009 "'Search' scares me. " Gee, Demsey, don't be a luddite Link to comment Share on other sites More sharing options...
Demsey Posted November 16, 2009 Report Share Posted November 16, 2009 don't be a luddite ...........and don't make me use Google either. I have no idea what a 'luddite' is. Sometimes this whole 'internet' thing makes me want to smash my computer against a wall. Technology. Pfffffffffffffffft! Link to comment Share on other sites More sharing options...
Cats Posted November 16, 2009 Author Report Share Posted November 16, 2009 Back to the subject with a few new pictures. Not the best of quality but maybe they show a little more. Any thoughts ?? Carpe Diem Cats Link to comment Share on other sites More sharing options...
jmb Posted November 16, 2009 Report Share Posted November 16, 2009 Cats, that looks maybe like some ferrous bits were stuck into the surface and they are what rusted... Damn, Demsey! OK, gospel according to Webster... Main Entry: Ludd·ite Pronunciation: \ˈlə-ˌdīt\ Function: noun Etymology: perhaps from Ned Ludd, 18th century Leicestershire workman who destroyed a knitting frame Date: 1811 : one of a group of early 19th century English workmen destroying laborsaving machinery as a protest; broadly : one who is opposed to especially technological change Link to comment Share on other sites More sharing options...
rosnik Posted November 16, 2009 Report Share Posted November 16, 2009 only old Rust ti remove...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now